linux-kernel - Re: [PATCH v3 6/6] tty/serial: atmel: changed the driver to work under at91-usart mfd

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f817c82a-95b6-afb3-e662-c481a877cf01@sorico.fr>
Date:   Fri, 25 May 2018 15:35:40 +0200
From:   Richard Genoud <richard.genoud@...il.com>
To:     Radu Pirea <radu.pirea@...rochip.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-spi@...r.kernel.org
Cc:     mark.rutland@....com, robh+dt@...nel.org, lee.jones@...aro.org,
        gregkh@...uxfoundation.org, jslaby@...e.com,
        alexandre.belloni@...tlin.com, nicolas.ferre@...rochip.com,
        broonie@...nel.org
Subject: Re: [PATCH v3 6/6] tty/serial: atmel: changed the driver to work
 under at91-usart mfd

On 25/05/2018 14:17, Radu Pirea wrote:
> 
> 
> On 05/15/2018 04:14 PM, Richard Genoud wrote:
>> On 15/05/2018 14:47, Radu Pirea wrote:
>>> On Mon, 2018-05-14 at 12:57 +0200, Richard Genoud wrote:
>>>> After your patch, the DMA is not selected anymore:
>>>> atmel_usart_serial atmel_usart_serial.0.auto: TX channel not
>>>> available, switch to pio
>>>> instead of:
>>>> atmel_usart fffff200.serial: using dma1chan2 for tx DMA transfers
>>>>
>>> Fixed.
>>>> And the kernel doesn't log anymore on the serial console, despite the
>>>> loglevel=8
>>>> (after reverting this series, the kernel logs reappears on the serial
>>>> console)
>>>>
>>> Which serial are you using as console?
>> fffff200.serial (sam9g35-cm)
>> ( stdout-path = "serial0:115200n8"; in the DTS )
>>
>> With this series applied, all the kernel log goes on the screen.
>> Without, it goes on the serial debug.
>>
> I tested again with archlinux arm and poky-linux4sam release as distros
> and kernel log goes on the serial debug. Can you give me more details
> like cmdline?
I used kernel 4.17-rc6
at91_dt_defconfig
at91sam9g35ek.dtb

Kernel command line: root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs
( the one from the DTS )

Detailed instructions:

git checkout v4.17-rc6 
ARCH=arm CROSS_COMPILE=path_to_my_Xchain/arm-linux- LOADADDR=0x20008000 make -j 12 at91_dt_defconfig
ARCH=arm CROSS_COMPILE=path_to_my_Xchain/arm-linux- LOADADDR=0x20008000 make -j 12 uImage at91sam9g35ek.dtb
cp arch/arm/boot/uImage arch/arm/boot/dts/at91sam9g35ek.dtb /tftpboot/

>From uboot:
tftpboot 0x20007FC0 uImage
tftpboot 0x26400000 at91sam9g35ek.dtb
bootm 0x20007FC0 - 0x26400000

[ I see the logs on the serial debug ]

git am \[PATCH\ v3\ [1-6]*

ARCH=arm CROSS_COMPILE=path_to_my_Xchain/arm-linux- LOADADDR=0x20008000 make -j 12 uImage at91sam9g35ek.dtb
cp arch/arm/boot/uImage arch/arm/boot/dts/at91sam9g35ek.dtb /tftpboot/

>From uboot:
tftpboot 0x20007FC0 uImage
tftpboot 0x26400000 at91sam9g35ek.dtb
bootm 0x20007FC0 - 0x26400000

[ I don't see the logs on the serial debug anymore ]


>>>> (tests done on sam9g35)
>>>>
>>> I will consider the rest of suggestions.
>>>> regards,
>>>> Richard
>>