Message-ID: <CAKv+Gu_oNUmOwTgM9sAsfMn4WgY+grC2f12vRC4HH9CgxxkfXQ@mail.gmail.com>
Date:   Sat, 26 May 2018 00:19:34 +0200
From:   Ard Biesheuvel <ard.biesheuvel@...aro.org>
To:     Sai Praneeth Prakhya <sai.praneeth.prakhya@...el.com>
Cc:     linux-efi@...r.kernel.org,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Lee Chun-Yi <jlee@...e.com>, Borislav Petkov <bp@...en8.de>,
        Tony Luck <tony.luck@...el.com>,
        Will Deacon <will.deacon@....com>,
        Dave Hansen <dave.hansen@...el.com>,
        Mark Rutland <mark.rutland@....com>,
        Bhupesh Sharma <bhsharma@...hat.com>,
        Naresh Bhat <naresh.bhat@...aro.org>,
        Ricardo Neri <ricardo.neri@...el.com>,
        Peter Zijlstra <peterz@...radead.org>,
        Ravi Shankar <ravi.v.shankar@...el.com>,
        Matt Fleming <matt@...eblueprint.co.uk>,
        Dan Williams <dan.j.williams@...el.com>,
        Miguel Ojeda <miguel.ojeda.sandonis@...il.com>
Subject: Re: [PATCH V4 0/3] Use efi_rts_wq to invoke EFI Runtime Services

On 26 May 2018 at 00:05, Sai Praneeth Prakhya
<sai.praneeth.prakhya@...el.com> wrote:
> From: Sai Praneeth <sai.praneeth.prakhya@...el.com>
>
> Problem statement:
> ------------------
> Presently, efi_runtime_services() silently switch %cr3 from swapper_pgd
> to efi_pgd. As a consequence, kernel code that runs in efi_pgd (e.g.,
> perf code via an NMI) will have incorrect user space mappings[1]. This
> could lead to otherwise unexpected access errors and, worse, unauthorized
> access to firmware code and data.
>
> Detailed discussion of problem statement:
> -----------------------------------------
> As this switch is not propagated to other kernel subsystems; they will
> wrongly assume that swapper_pgd is still in use and it can lead to
> following issues:
>
> 1. If kernel code tries to access user space addresses while in efi_pgd,
> it could lead to unauthorized accesses to firmware code/data.
> (e.g: <__>/copy_from_user_nmi()).
> [This could also be disastrous if the frame pointer happens to point at
> MMIO in the EFI runtime mappings] - Mark Rutland.
>
> An example of a subsystem that could touch user space while in efi_pgd is
> perf. Assume that we are in efi_pgd, a user could use perf to profile
> some user data and depending on the address the user is trying to
> profile, two things could happen.
> 1. If the mappings are absent, perf fails to profile.
> 2. If efi_pgd does have mappings for the requested address (these
>   mappings are erroneous), perf profiles firmware code/data. If the
>   address is MMIO'ed, perf could have potentially changed some device state.
>
> The culprit in both the cases is, EFI subsystem swapping out pgd and not
> perf. Because, EFI subsystem has broken the *general assumption* that
> all other subsystems rely on - "user space might be valid and nobody has
> switched %cr3".
>
> Solutions:
> ----------
> There are two ways to fix this issue:
> 1. Educate about pgd change to *all* the subsystems that could
>    potentially access user space while in efi_pgd.
>   On x86, AFAIK, it could happen only when some one touches user space
>   from the back of an NMI (a quick audit on <__>/copy_from_user_nmi,
>   showed perf and oprofile). On arm, it could happen from multiple
>   places as arm runs efi_runtime_services() interrupts enabled (ARM folks,
>   please comment on this as I might be wrong); whereas x86 runs
>   efi_runtime_services() interrupts disabled.
>
>   I think, this solution isn't holistic because
>   a. Any other subsystem might well do the same, if not now, in future.
>   b. Also, this solution looks simpler on x86 but not true if it's the
>     same for arm (ARM folks, please comment on this as I might be wrong).
>   c. This solution looks like a work around rather than addressing the issue.
>
> 2. Running efi_runtime_services() in kthread context.
>   This makes sense because efi_pgd doesn't have user space and kthread
>   by definition means that user space is not valid. Any kernel code that
>   tries to touch user space while in kthread is buggy in itself. If so,
>   it should be an easy fix in the other subsystem. This also take us one
>   step closer to long awaiting proposal of Andy - Running EFI at CPL 3.
>
> What does this patch set do?
> ----------------------------
> Introduce efi_rts_wq (EFI runtime services work queue).
> When a user process requests the kernel to execute any efi_runtime_service(),
> kernel queues the work to efi_rts_wq, a kthread comes along, switches to
> efi_pgd and executes efi_runtime_service() in kthread context. IOW, this
> patch set adds support to the EFI subsystem to handle all calls to
> efi_runtime_services() using a work queue (which in turn uses kthread).
>
> How running efi_runtime_services() in kthread fixes above discussed issues?
> ---------------------------------------------------------------------------
> If we run efi_runtime_services() in kthread context and if perf
> checks for it, we could get both the above scenarios correct by perf
> aborting the profiling. Not only perf, but any subsystem that tries to
> touch user space should first check for kthread context and if so,
> should abort.
>
> Q. If we still need check for kthread context in other subsystems that
> access user space, what does this patch set fix?
> A. This patch set makes sure that EFI subsystem is not at fault.
> Without this patch set the blame is upon EFI subsystem, because it's the
> one that changed pgd and hasn't communicated this change to everyone and
> hence broke the general assumption. Running efi_runtime_services() in
> kthread means explicitly communicating that user space is invalid, now
> it's the responsibility of other subsystem to make sure that it's
> running in right context.
>
> Testing:
> --------
> Tested using LUV (Linux UEFI Validation) for x86_64, x86_32 and arm64
> (qemu only). Will appreciate the effort if someone could test the
> patches on real ARM/ARM64 machines.
> LUV: https://01.org/linux-uefi-validation
>
> Credits:
> --------
> Thanks to Ricardo, Dan, Miguel, Mark and Peter for reviews and suggestions.
> Thanks to Boris and Andy for making me think through/help on what I am
> addressing with this patch set.
>
> Please feel free to pour in your comments and concerns.
>
> Note:
> -----
> Patches are based on Linus's kernel v4.17-rc6
>
> [1] Backup: Detailing efi_pgd:
> ------------------------------
> efi_pgd has mappings for EFI Runtime Code/Data (on x86, plus EFI Boot time
> Code/Data) regions. Due to the nature of these mappings, they fall
> in user space address ranges and they are not the same as swapper.
>
> [On arm64, the EFI mappings are in the VA range usually used for user
> space. The two halves of the address space are managed by separate
> tables, TTBR0 and TTBR1. We always map the kernel in TTBR1, and we map
> user space or EFI runtime mappings in TTBR0.] - Mark Rutland
>
> Changes from V3 to V4:
> ----------------------
> 1. As suggested by Peter, use completions instead of flush_work() as the
>   former is cheaper
> 2. Call efi_delete_dummy_variable() from efisubsys_init(). Sorry! Ard,
>   wasn't able to find a better alternative to keep this change local to
>   arch/x86.
>

Two questions:
- Should the non-blocking variants of the query and set_variable_store
use the work queue? Doesn't that make them blocking?
- If the non-blocking set_variable() does not use the work queue, can
we just call it from efi_delete_dummy_variable(), and keep the calls
where they are?



> Changes from V2 to V3:
> ----------------------
> 1. Rewrite the cover letter to clearly state the problem. What we are
>   fixing and what we are not fixing.
> 2. Make efi_delete_dummy_variable() change local to x86.
> 3. Avoid using BUG(), instead, print error message and exit gracefully.
> 4. Move struct efi_runtime_work to runtime-wrappers.c file.
> 5. Give enum a name (efi_rts_ids) and use it in efi_runtime_work.
> 6. Add Naresh (maintainer of LUV for ARM) and Miguel to the CC list.
>
> Changes from V1 to V2:
> ----------------------
> 1. Remove unnecessary include of asm/efi.h file - Fixes build error on
>   ia64, reported by 0-day
> 2. Use enum to identify efi_runtime_services()
> 3. Use alloc_ordered_workqueue() to create efi_rts_wq as
>   create_workqueue() is scheduled for depreciation.
> 4. Make efi_call_rts() static, as it has no callers outside
>   runtime-wrappers.c
> 5. Use BUG(), when we are unable to queue work or unable to identify
>   requested efi_runtime_service() - Because these two situations should
>   *never* happen.
>
> Sai Praneeth (3):
>   x86/efi: Call efi_delete_dummy_variable() during efi subsystem
>     initialization
>   efi: Create efi_rts_wq and efi_queue_work() to invoke all
>     efi_runtime_services()
>   efi: Use efi_rts_wq to invoke EFI Runtime Services
>
>  arch/x86/include/asm/efi.h              |   1 -
>  arch/x86/platform/efi/efi.c             |   6 -
>  drivers/firmware/efi/efi.c              |  20 +++
>  drivers/firmware/efi/runtime-wrappers.c | 256 +++++++++++++++++++++++++++++---
>  include/linux/efi.h                     |   6 +
>  5 files changed, 262 insertions(+), 27 deletions(-)
>
> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@...el.com>
> Suggested-by: Andy Lutomirski <luto@...nel.org>
> Cc: Lee Chun-Yi <jlee@...e.com>
> Cc: Borislav Petkov <bp@...en8.de>
> Cc: Tony Luck <tony.luck@...el.com>
> Cc: Will Deacon <will.deacon@....com>
> Cc: Dave Hansen <dave.hansen@...el.com>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: Bhupesh Sharma <bhsharma@...hat.com>
> Cc: Naresh Bhat <naresh.bhat@...aro.org>
> Cc: Ricardo Neri <ricardo.neri@...el.com>
> Cc: Peter Zijlstra <peterz@...radead.org>
> Cc: Ravi Shankar <ravi.v.shankar@...el.com>
> Cc: Matt Fleming <matt@...eblueprint.co.uk>
> Cc: Dan Williams <dan.j.williams@...el.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@...aro.org>
> Cc: Miguel Ojeda <miguel.ojeda.sandonis@...il.com>
>
> --
> 2.7.4
>

Powered by blists - more mailing lists