| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180528100320.650216776@linuxfoundation.org>
Date: Mon, 28 May 2018 11:56:50 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Andrey Ryabinin <aryabinin@...tuozzo.com>,
Paul Menzel <pmenzel+linux-kasan-dev@...gen.mpg.de>,
Alexander Potapenko <glider@...gle.com>,
Dmitry Vyukov <dvyukov@...gle.com>,
Matthew Wilcox <willy@...radead.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 4.14 025/496] mm/kasan: dont vfree() nonexistent vm_area
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Ryabinin <aryabinin@...tuozzo.com>
commit 0f901dcbc31f88ae41a2aaa365f7802b5d520a28 upstream.
KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process. Attempt to offline memory onlined by
normal boot process leads to this:
Trying to vfree() nonexistent vm area (000000005d3b34b9)
WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190
Call Trace:
kasan_mem_notifier+0xad/0xb9
notifier_call_chain+0x166/0x260
__blocking_notifier_call_chain+0xdb/0x140
__offline_pages+0x96a/0xb10
memory_subsys_offline+0x76/0xc0
device_offline+0xb8/0x120
store_mem_state+0xfa/0x120
kernfs_fop_write+0x1d5/0x320
__vfs_write+0xd4/0x530
vfs_write+0x105/0x340
SyS_write+0xb0/0x140
Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc(). Use find_vm_area() to see if we can call vfree().
Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it. If memory will come
online again that shadow will be reused.
Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?
vfree() is able to free any address returned by
__vmalloc_node_range(). And __vmalloc_node_range() gives you any
address you ask. It doesn't have to be an address in [VMALLOC_START,
VMALLOC_END] range.
That's also how the module_alloc()/module_memfree() works on
architectures that have designated area for modules.
[aryabinin@...tuozzo.com: improve comments]
Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com
[akpm@...ux-foundation.org: fix typos, reflow comment]
Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com
Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug")
Signed-off-by: Andrey Ryabinin <aryabinin@...tuozzo.com>
Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@...gen.mpg.de>
Cc: Alexander Potapenko <glider@...gle.com>
Cc: Dmitry Vyukov <dvyukov@...gle.com>
Cc: Matthew Wilcox <willy@...radead.org>
Cc: <stable@...r.kernel.org>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@...ux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
mm/kasan/kasan.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 61 insertions(+), 2 deletions(-)
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -737,6 +737,40 @@ void __asan_unpoison_stack_memory(const
EXPORT_SYMBOL(__asan_unpoison_stack_memory);
#ifdef CONFIG_MEMORY_HOTPLUG
+static bool shadow_mapped(unsigned long addr)
+{
+ pgd_t *pgd = pgd_offset_k(addr);
+ p4d_t *p4d;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ if (pgd_none(*pgd))
+ return false;
+ p4d = p4d_offset(pgd, addr);
+ if (p4d_none(*p4d))
+ return false;
+ pud = pud_offset(p4d, addr);
+ if (pud_none(*pud))
+ return false;
+
+ /*
+ * We can't use pud_large() or pud_huge(), the first one is
+ * arch-specific, the last one depends on HUGETLB_PAGE. So let's abuse
+ * pud_bad(), if pud is bad then it's bad because it's huge.
+ */
+ if (pud_bad(*pud))
+ return true;
+ pmd = pmd_offset(pud, addr);
+ if (pmd_none(*pmd))
+ return false;
+
+ if (pmd_bad(*pmd))
+ return true;
+ pte = pte_offset_kernel(pmd, addr);
+ return !pte_none(*pte);
+}
+
static int __meminit kasan_mem_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -758,6 +792,14 @@ static int __meminit kasan_mem_notifier(
case MEM_GOING_ONLINE: {
void *ret;
+ /*
+ * If shadow is mapped already than it must have been mapped
+ * during the boot. This could happen if we onlining previously
+ * offlined memory.
+ */
+ if (shadow_mapped(shadow_start))
+ return NOTIFY_OK;
+
ret = __vmalloc_node_range(shadow_size, PAGE_SIZE, shadow_start,
shadow_end, GFP_KERNEL,
PAGE_KERNEL, VM_NO_GUARD,
@@ -769,8 +811,25 @@ static int __meminit kasan_mem_notifier(
kmemleak_ignore(ret);
return NOTIFY_OK;
}
- case MEM_OFFLINE:
- vfree((void *)shadow_start);
+ case MEM_OFFLINE: {
+ struct vm_struct *vm;
+
+ /*
+ * shadow_start was either mapped during boot by kasan_init()
+ * or during memory online by __vmalloc_node_range().
+ * In the latter case we can use vfree() to free shadow.
+ * Non-NULL result of the find_vm_area() will tell us if
+ * that was the second case.
+ *
+ * Currently it's not possible to free shadow mapped
+ * during boot by kasan_init(). It's because the code
+ * to do that hasn't been written yet. So we'll just
+ * leak the memory.
+ */
+ vm = find_vm_area((void *)shadow_start);
+ if (vm)
+ vfree((void *)shadow_start);
+ }
}
return NOTIFY_OK;
Powered by blists - more mailing lists