| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180529185021.13738-2-marcus.folkesson@gmail.com>
Date: Tue, 29 May 2018 20:50:20 +0200
From: Marcus Folkesson <marcus.folkesson@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jonathan Corbet <corbet@....net>,
Felipe Balbi <balbi@...nel.org>, davem@...emloft.net,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Randy Dunlap <rdunlap@...radead.org>,
Ruslan Bilovol <ruslan.bilovol@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
Kate Stewart <kstewart@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Marcus Folkesson <marcus.folkesson@...il.com>
Subject: [PATCH v3 2/3] Documentation: usb: add documentation for USB CCID Gadget Device
Add documentation to give a brief description on how to use the
CCID Gadget Device.
This includes a description for all attributes followed by an example on
how to setup the device with ConfigFS.
Signed-off-by: Marcus Folkesson <marcus.folkesson@...il.com>
---
Notes:
v3:
- correct the grammer (thanks Randy)
v2:
- add the missing changelog text
Documentation/usb/gadget_ccid.rst | 267 ++++++++++++++++++++++++++++++++++++++
1 file changed, 267 insertions(+)
create mode 100644 Documentation/usb/gadget_ccid.rst
diff --git a/Documentation/usb/gadget_ccid.rst b/Documentation/usb/gadget_ccid.rst
new file mode 100644
index 000000000000..524fe9e6ac19
--- /dev/null
+++ b/Documentation/usb/gadget_ccid.rst
@@ -0,0 +1,267 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+CCID Gadget
+============
+
+:Author: Marcus Folkesson <marcus.folkesson@...il.com>
+
+Introduction
+============
+
+The CCID Gadget will present itself as a CCID device to the host system.
+The device supports two endpoints for now; BULK IN and BULK OUT.
+These endpoints are exposed to userspace via /dev/ccidg*.
+
+All CCID commands are sent on the BULK-OUT endpoint. Each command sent to the CCID
+has an associated ending response. Some commands can also have intermediate
+responses. The response is sent on the BULK-IN endpoint.
+See Figure 3-3 in the CCID Specification [1]_ for more details.
+
+The CCID commands must be handled in userspace since the driver is only working
+as a transport layer for the TPDUs.
+
+
+CCID Commands
+--------------
+
+All CCID commands begins with a 10-byte header followed by an optional
+data field depending on message type.
+
++--------+--------------+-------+----------------------------------+
+| Offset | Field | Size | Description |
++========+==============+=======+==================================+
+| 0 | bMessageType | 1 | Type of message |
++--------+--------------+-------+----------------------------------+
+| 1 | dwLength | 4 | Message specific data length |
+| | | | |
++--------+--------------+-------+----------------------------------+
+| 5 | bSlot | 1 | Identifies the slot number |
+| | | | for this command |
++--------+--------------+-------+----------------------------------+
+| 6 | bSeq | 1 | Sequence number for command |
++--------+--------------+-------+----------------------------------+
+| 7 | ... | 3 | Fields depends on message type |
++--------+--------------+-------+----------------------------------+
+| 10 | abData | array | Message specific data (OPTIONAL) |
++--------+--------------+-------+----------------------------------+
+
+
+Multiple CCID gadgets
+----------------------
+
+It is possible to create multiple instances of the CCID gadget, however,
+a much more flexible way is to create one gadget and set the `nslots` attribute
+to the number of desired CCID devices.
+
+All CCID commands specify which slot is the receiver in the `bSlot` field
+of the CCID header.
+
+Usage
+=====
+
+Access from userspace
+----------------------
+All communication is by read(2) and write(2) to the corresponding /dev/ccidg* device.
+Only one file descriptor is allowed to be open to the device at a time.
+
+The buffer size provided to read(2) **must be at least** 522 (10 bytes header + 512 bytes payload)
+bytes as we are working with whole commands.
+
+The buffer size provided to write(2) **may not exceed** 522 (10 bytes header + 512 bytes payload)
+bytes as we are working with whole commands.
+
+
+Configuration with configfs
+----------------------------
+
+ConfigFS is used to create and configure the CCID gadget.
+In order to get a device to work as intended, a few attributes must
+be considered.
+
+The attributes are described below followed by an example.
+
+features
+~~~~~~~~~
+
+The `feature` attribute writes to the dwFeatures field in the class descriptor.
+See Table 5.1-1 Smart Card Device Descriptors in the CCID Specification [1]_.
+
+The value indicates what intelligent features the CCID has.
+These values are available to user application as defined in ccid.h [2]_.
+The default value is 0x00000000.
+
+The value is a bitwise OR operation performed on the following values:
+
++------------+----------------------------------------------------------------+
+| Value | Description |
++============+================================================================+
+| 0x00000000 | No special characteristics |
++------------+----------------------------------------------------------------+
+| 0x00000002 | Automatic parameter configuration based on ATR data |
++------------+----------------------------------------------------------------+
+| 0x00000004 | Automatic activation of ICC on inserting |
++------------+----------------------------------------------------------------+
+| 0x00000008 | Automatic ICC voltage selection |
++------------+----------------------------------------------------------------+
+| 0x00000010 | Automatic ICC clock frequency change according to active |
+| | parameters provided by the Host or self determined |
++------------+----------------------------------------------------------------+
+| 0x00000020 | Automatic baud rate change according to active |
+| | parameters provided by the Host or self determined |
++------------+----------------------------------------------------------------+
+| 0x00000040 | Automatic parameters negotiation made by the CCID |
++------------+----------------------------------------------------------------+
+| 0x00000080 | Automatic PPS made by the CCID according to the |
+| | active parameters |
++------------+----------------------------------------------------------------+
+| 0x00000100 | CCID can set ICC in clock stop mode |
++------------+----------------------------------------------------------------+
+| 0x00000200 | NAD value other than 00 accepted (T=1 protocol in use) |
++------------+----------------------------------------------------------------+
+| 0x00000400 | Automatic IFSD exchange as first exchange |
++------------+----------------------------------------------------------------+
+
+
+Only one of the following values may be present to select a level of exchange:
+
++------------+--------------------------------------------------+
+| Value | Description |
++============+==================================================+
+| 0x00010000 | TPDU level exchanges with CCID |
++------------+--------------------------------------------------+
+| 0x00020000 | Short APDU level exchange with CCID |
++------------+--------------------------------------------------+
+| 0x00040000 | Short and Extended APDU level exchange with CCID |
++------------+--------------------------------------------------+
+
+If none of those values is indicated the level of exchange is
+character.
+
+
+protocols
+~~~~~~~~~~
+The `protocols` attribute writes to the dwProtocols field in the class descriptor.
+See Table 5.1-1 Smart Card Device Descriptors in the CCID Specification [1]_.
+
+The value is a bitwise OR operation performed on the following values:
+
++--------+--------------+
+| Value | Description |
++========+==============+
+| 0x0001 | Protocol T=0 |
++--------+--------------+
+| 0x0002 | Protocol T=1 |
++--------+--------------+
+
+If no protocol is selected both T=0 and T=1 will be supported (`protocols` = 0x0003).
+
+nslots
+~~~~~~
+
+The `nslots` attribute writes to the bMaxSlotIndex field in the class descriptor.
+See Table 5.1-1 Smart Card Device Descriptors in the CCID Specification [1]_.
+
+This is the index of the highest available slot on this device. All slots are consecutive starting at 00h.
+i.e. 0Fh = 16 slots on this device numbered 00h to 0Fh.
+
+The default value is 0, which means one slot.
+
+
+pinsupport
+~~~~~~~~~~~~
+
+This value indicates what PIN support features the CCID has.
+
+The `pinsupport` attribute writes to the dwPINSupport field in the class descriptor.
+See Table 5.1-1 Smart Card Device Descriptors in the CCID Specification [1]_.
+
+
+The value is a bitwise OR operation performed on the following values:
+
++--------+----------------------------+
+| Value | Description |
++========+============================+
+| 0x00 | No PIN support |
++--------+----------------------------+
+| 0x01 | PIN Verification supported |
++--------+----------------------------+
+| 0x02 | PIN Modification supported |
++--------+----------------------------+
+
+The default value is set to 0x00.
+
+
+lcdlayout
+~~~~~~~~~~
+
+Number of lines and characters for the LCD display used to send messages for PIN entry.
+
+The `lcdLayout` attribute writes to the wLcdLayout field in the class descriptor.
+See Table 5.1-1 Smart Card Device Descriptors in the CCID Specification [1]_.
+
+
+The value is set as follows:
+
++--------+------------------------------------+
+| Value | Description |
++========+====================================+
+| 0x0000 | No LCD |
++--------+------------------------------------+
+| 0xXXYY | XX: number of lines |
+| | YY: number of characters per line. |
++--------+------------------------------------+
+
+The default value is set to 0x0000.
+
+
+Example
+-------
+
+Here is an example on how to setup a CCID gadget with configfs ::
+
+ #!/bin/sh
+
+ CONFIGDIR=/sys/kernel/config
+ GADGET=$CONFIGDIR/usb_gadget/g0
+ FUNCTION=$GADGET/functions/ccid.sc0
+
+ VID=YOUR_VENDOR_ID_HERE
+ PID=YOUR_PRODUCT_ID_HERE
+ UDC=YOUR_UDC_HERE
+
+ #Mount filesystem
+ mount none -t configfs $CONFIGDIR
+
+ #Populate ID:s
+ echo $VID > $GADGET/idVendor
+ echo $PID > $GADGET/idProduct
+
+ #Create and configure the gadget
+ mkdir $FUNCTION
+ echo 0x000407B8 > $FUNCTION/features
+ echo 0x02 > $FUNCTION/protocols
+
+ #Create our english strings
+ mkdir $GADGET/strings/0x409
+ echo 556677 > $GADGET/strings/0x409/serialnumber
+ echo "Hungry Penguins" > $GADGET/strings/0x409/manufacturer
+ echo "Harpoon With SmartCard" > $GADGET/strings/0x409/product
+
+ #Create configuration
+ mkdir $GADGET/configs/c.1
+ mkdir $GADGET/configs/c.1/strings/0x409
+ echo Config1 > $GADGET/configs/c.1/strings/0x409/configuration
+
+ #Use `Config1` for our CCID gadget
+ ln -s $FUNCTION $GADGET/configs/c.1
+
+ #Execute
+ echo $UDC > $GADGET/UDC
+
+
+References
+==========
+
+.. [1] http://www.usb.org/developers/docs/devclass_docs/DWG_Smart-Card_CCID_Rev110.pdf
+.. [2] include/uapi/linux/usb/ccid.h
--
2.16.2
Powered by blists - more mailing lists