[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180529160859.2625eb6d@jawa>
Date: Tue, 29 May 2018 16:08:59 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Thierry Reding <thierry.reding@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>,
David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
Rob Herring <robh@...nel.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 RESEND] display: panel: Add AUO g070vvn01 display
support (800x480)
Hi,
> Hi Thierry,
>
> > This commit adds support for AUO's 7.0" display.
> >
>
> Thierry, shall I perform some more work on this code, or is it
> eligible for applying to your tree?
If I may put a gentle remaining on this patch.....
>
> Best regards,
> Ćukasz
>
> > Signed-off-by: Lukasz Majewski <lukma@...x.de>
> > Reviewed-by: Rob Herring <robh@...nel.org>
> >
> > ---
> > Changes for v3:
> > - Remove not used 'bus-format-override = "rgb565";' property
> >
> > Changes for v2:
> > - Add *.txt suffix to the auo,g070wn01 file
> > ---
> > .../bindings/display/panel/auo,g070vvn01.txt | 29
> > ++++++++++++++++++++
> > drivers/gpu/drm/panel/panel-simple.c | 31
> > ++++++++++++++++++++++ 2 files changed, 60 insertions(+) create mode
> > 100644
> > Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
> > b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
> > new file mode 100644 index 000000000000..49e4105378f6 --- /dev/null
> > +++
> > b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
> > @@ -0,0 +1,29 @@ +AU Optronics Corporation 7.0" FHD (800 x 480) TFT
> > LCD panel +
> > +Required properties:
> > +- compatible: should be "auo,g070vvn01"
> > +- backlight: phandle of the backlight device attached to the panel
> > +- power-supply: single regulator to provide the supply voltage
> > +
> > +Required nodes:
> > +- port: Parallel port mapping to connect this display
> > +
> > +This panel needs single power supply voltage. Its backlight is
> > conntrolled +via PWM signal.
> > +
> > +Example:
> > +--------
> > +
> > +Example device-tree definition when connected to iMX6Q based board
> > +
> > + lcd_panel: lcd-panel {
> > + compatible = "auo,g070vvn01";
> > + backlight = <&backlight_lcd>;
> > + power-supply = <®_display>;
> > +
> > + port {
> > + lcd_panel_in: endpoint {
> > + remote-endpoint =
> > <&lcd_display_out>;
> > + };
> > + };
> > + };
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c index
> > cbf1ab404ee7..d9984bdb5bb5 100644 ---
> > a/drivers/gpu/drm/panel/panel-simple.c +++
> > b/drivers/gpu/drm/panel/panel-simple.c @@ -581,6 +581,34 @@ static
> > const struct panel_desc auo_b133htn01 = { },
> > };
> >
> > +static const struct display_timing auo_g070vvn01_timings = {
> > + .pixelclock = { 33300000, 34209000, 45000000 },
> > + .hactive = { 800, 800, 800 },
> > + .hfront_porch = { 20, 40, 200 },
> > + .hback_porch = { 87, 40, 1 },
> > + .hsync_len = { 1, 48, 87 },
> > + .vactive = { 480, 480, 480 },
> > + .vfront_porch = { 5, 13, 200 },
> > + .vback_porch = { 31, 31, 29 },
> > + .vsync_len = { 1, 1, 3 },
> > +};
> > +
> > +static const struct panel_desc auo_g070vvn01 = {
> > + .timings = &auo_g070vvn01_timings,
> > + .num_timings = 1,
> > + .bpc = 8,
> > + .size = {
> > + .width = 152,
> > + .height = 91,
> > + },
> > + .delay = {
> > + .prepare = 200,
> > + .enable = 50,
> > + .disable = 50,
> > + .unprepare = 1000,
> > + },
> > +};
> > +
> > static const struct drm_display_mode auo_g104sn02_mode = {
> > .clock = 40000,
> > .hdisplay = 800,
> > @@ -2095,6 +2123,9 @@ static const struct of_device_id
> > platform_of_match[] = { .compatible = "auo,b133xtn01",
> > .data = &auo_b133xtn01,
> > }, {
> > + .compatible = "auo,g070vvn01",
> > + .data = &auo_g070vvn01,
> > + }, {
> > .compatible = "auo,g104sn02",
> > .data = &auo_g104sn02,
> > }, {
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@...x.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists