[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180530090946.1635-2-suzuki.katsuhiro@socionext.com>
Date: Wed, 30 May 2018 18:09:39 +0900
From: Katsuhiro Suzuki <suzuki.katsuhiro@...ionext.com>
To: Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
linux-media@...r.kernel.org
Cc: Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Katsuhiro Suzuki <suzuki.katsuhiro@...ionext.com>
Subject: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier HSC
This patch adds DT binding documentation for UniPhier HSC which is
MPEG2-TS input/output and demux subsystem.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@...ionext.com>
---
.../bindings/media/uniphier,hsc.txt | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/uniphier,hsc.txt
diff --git a/Documentation/devicetree/bindings/media/uniphier,hsc.txt b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
new file mode 100644
index 000000000000..4242483b2ecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
@@ -0,0 +1,38 @@
+Socionext UniPhier HSC (High-speed Stream Controller)
+
+The Socionext UniPhier HSC subsystem consists of MPEG2-TS input/output and
+demultiplexer cores in the same register space.
+
+This interface is support TS serial signals (clock, valid, sync, data) from
+external demodulators.
+
+Required properties:
+- compatible : should be one of the following:
+ "socionext,uniphier-ld11-hsc"
+ "socionext,uniphier-ld20-hsc"
+- reg : offset and length of the register set for the device.
+- interrupts : should contain DMA and TSI error interrupt.
+- pinctrl-names : should be "default".
+- pinctrl-0 : defined TS serial signal pins for external demodulators.
+- clock-names : should include following entries:
+ "hsc", "stdmac"
+- clocks : a list of phandle, should contain an entry for each
+ entry in clock-names.
+- reset-names : should include following entries:
+ "hsc", "stdmac"
+- resets : a list of phandle, should contain an entry for each
+ entry in reset-names.
+
+Example:
+ hsc {
+ compatible = "socionext,uniphier-ld20-hsc";
+ reg = <0x5c000000 0x100000>;
+ interrupts = <0 100 4>, <0 101 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hscin2_s>,
+ <&pinctrl_hscin3_s>;
+ clock-names = "stdmac", "hsc";
+ clocks = <&sys_clk 8>, <&sys_clk 9>;
+ reset-names = "stdmac", "hsc";
+ resets = <&sys_rst 8>, <&sys_rst 9>;
+ };
--
2.17.0
Powered by blists - more mailing lists