| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 30 May 2018 15:14:33 +0200
From: Frieder Schrempf <frieder.schrempf@...eet.de>
To: linux-mtd@...ts.infradead.org, boris.brezillon@...tlin.com,
linux-spi@...r.kernel.org
Cc: dwmw2@...radead.org, computersforpeace@...il.com,
marek.vasut@...il.com, richard@....at, miquel.raynal@...tlin.com,
broonie@...nel.org, david.wolfe@....com, fabio.estevam@....com,
prabhakar.kushwaha@....com, yogeshnarayan.gaur@....com,
han.xu@....com, Frieder Schrempf <frieder.schrempf@...eet.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 04/11] dt-bindings: spi: Move and adjust the bindings for the fsl-qspi driver
Move the documentation of the old SPI NOR driver to the place of the new
SPI memory interface based driver and adjust the content to reflect the
new drivers settings.
Signed-off-by: Frieder Schrempf <frieder.schrempf@...eet.de>
---
.../devicetree/bindings/mtd/fsl-quadspi.txt | 65 ------------------
.../devicetree/bindings/spi/spi-fsl-qspi.txt | 69 ++++++++++++++++++++
2 files changed, 69 insertions(+), 65 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
deleted file mode 100644
index 483e9cf..0000000
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Freescale Quad Serial Peripheral Interface(QuadSPI)
-
-Required properties:
- - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
- "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
- "fsl,ls1021a-qspi"
- or
- "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
- "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
- - reg : the first contains the register location and length,
- the second contains the memory mapping address and length
- - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
- - interrupts : Should contain the interrupt for the device
- - clocks : The clocks needed by the QuadSPI controller
- - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
-
-Optional properties:
- - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
- Each bus can be connected with two NOR flashes.
- Most of the time, each bus only has one NOR flash
- connected, this is the default case.
- But if there are two NOR flashes connected to the
- bus, you should enable this property.
- (Please check the board's schematic.)
- - big-endian : That means the IP register is big endian
-
-Example:
-
-qspi0: quadspi@...44000 {
- compatible = "fsl,vf610-qspi";
- reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
- reg-names = "QuadSPI", "QuadSPI-memory";
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_QSPI0_EN>,
- <&clks VF610_CLK_QSPI0>;
- clock-names = "qspi_en", "qspi";
-
- flash0: s25fl128s@0 {
- ....
- };
-};
-
-Example showing the usage of two SPI NOR devices:
-
-&qspi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi2>;
- status = "okay";
-
- flash0: n25q256a@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a", "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- reg = <0>;
- };
-
- flash1: n25q256a@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a", "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- reg = <1>;
- };
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
new file mode 100644
index 0000000..0ee9cd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt
@@ -0,0 +1,69 @@
+* Freescale Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+ - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
+ "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
+ "fsl,ls1021a-qspi", "fsl,ls2080a-qspi"
+ or
+ "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clocks needed by the QuadSPI controller
+ - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi".
+
+Optional properties:
+ - big-endian : That means the IP registers format is big endian
+
+Required SPI slave node properties:
+ - reg: There are two buses (A and B) with two chip selects each.
+ This encodes to which bus and CS the flash is connected:
+ <0>: Bus A, CS 0
+ <1>: Bus A, CS 1
+ <2>: Bus B, CS 0
+ <3>: Bus B, CS 1
+
+Example:
+
+qspi0: quadspi@...44000 {
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_QSPI0_EN>,
+ <&clks VF610_CLK_QSPI0>;
+ clock-names = "qspi_en", "qspi";
+
+ flash0: s25fl128s@0 {
+ ....
+ };
+};
+
+Example showing the usage of two SPI NOR devices on bus A:
+
+&qspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi2>;
+ status = "okay";
+
+ flash0: n25q256a@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a", "jedec,spi-nor";
+ spi-max-frequency = <29000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <0>;
+ };
+
+ flash1: n25q256a@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a", "jedec,spi-nor";
+ spi-max-frequency = <29000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <1>;
+ };
+};
--
2.7.4
Powered by blists - more mailing lists