| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1527726980-11723-3-git-send-email-ray.jui@broadcom.com>
Date: Wed, 30 May 2018 17:36:19 -0700
From: Ray Jui <ray.jui@...adcom.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Pramod Kumar <pramod.kumar@...adcom.com>,
Ray Jui <ray.jui@...adcom.com>
Subject: [PATCH v2 2/3] clk: bcm: Update and add Stingray clock entries
From: Pramod Kumar <pramod.kumar@...adcom.com>
Update and add Stingray clock definitions and tables so they match the
binding document and the latest ASIC datasheet
Signed-off-by: Pramod Kumar <pramod.kumar@...adcom.com>
Signed-off-by: Ray Jui <ray.jui@...adcom.com>
---
drivers/clk/bcm/clk-sr.c | 135 ++++++++++++++++++++++++++++++++-----
include/dt-bindings/clock/bcm-sr.h | 24 +++++--
2 files changed, 137 insertions(+), 22 deletions(-)
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
index adc74f4..7b9efc0 100644
--- a/drivers/clk/bcm/clk-sr.c
+++ b/drivers/clk/bcm/clk-sr.c
@@ -56,8 +56,8 @@ static const struct iproc_pll_ctrl sr_genpll0 = {
};
static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
- [BCM_SR_GENPLL0_SATA_CLK] = {
- .channel = BCM_SR_GENPLL0_SATA_CLK,
+ [BCM_SR_GENPLL0_125M_CLK] = {
+ .channel = BCM_SR_GENPLL0_125M_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 6, 0, 12),
.mdiv = REG_VAL(0x18, 0, 9),
@@ -102,6 +102,65 @@ static int sr_genpll0_clk_init(struct platform_device *pdev)
return 0;
}
+static const struct iproc_pll_ctrl sr_genpll2 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 1, 13, 12),
+ .reset = RESET_VAL(0x0, 12, 11),
+ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+ .status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll2_clk[] = {
+ [BCM_SR_GENPLL2_NIC_CLK] = {
+ .channel = BCM_SR_GENPLL2_NIC_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
+ [BCM_SR_GENPLL2_TS_500_CLK] = {
+ .channel = BCM_SR_GENPLL2_TS_500_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL2_125_NITRO_CLK] = {
+ .channel = BCM_SR_GENPLL2_125_NITRO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL2_CHIMP_CLK] = {
+ .channel = BCM_SR_GENPLL2_CHIMP_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL2_NIC_FLASH_CLK] = {
+ .channel = BCM_SR_GENPLL2_NIC_FLASH_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
+ [BCM_SR_GENPLL2_FS4_CLK] = {
+ .channel = BCM_SR_GENPLL2_FS4_CLK,
+ .enable = ENABLE_VAL(0x4, 11, 5, 17),
+ .mdiv = REG_VAL(0x1c, 20, 9),
+ },
+};
+
+static int sr_genpll2_clk_init(struct platform_device *pdev)
+{
+ iproc_pll_clk_setup(pdev->dev.of_node,
+ &sr_genpll2, NULL, 0, sr_genpll2_clk,
+ ARRAY_SIZE(sr_genpll2_clk));
+ return 0;
+}
+
static const struct iproc_pll_ctrl sr_genpll3 = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_NEEDS_SW_CFG,
@@ -157,6 +216,30 @@ static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
.enable = ENABLE_VAL(0x4, 6, 0, 12),
.mdiv = REG_VAL(0x18, 0, 9),
},
+ [BCM_SR_GENPLL4_TPIU_PLL_CLK] = {
+ .channel = BCM_SR_GENPLL4_TPIU_PLL_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 7, 1, 13),
+ .mdiv = REG_VAL(0x18, 10, 9),
+ },
+ [BCM_SR_GENPLL4_NOC_CLK] = {
+ .channel = BCM_SR_GENPLL4_NOC_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
+ [BCM_SR_GENPLL4_CHCLK_FS4_CLK] = {
+ .channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 9, 3, 15),
+ .mdiv = REG_VAL(0x1c, 0, 9),
+ },
+ [BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = {
+ .channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x4, 10, 4, 16),
+ .mdiv = REG_VAL(0x1c, 10, 9),
+ },
};
static int sr_genpll4_clk_init(struct platform_device *pdev)
@@ -181,18 +264,21 @@ static const struct iproc_pll_ctrl sr_genpll5 = {
};
static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
- [BCM_SR_GENPLL5_FS_CLK] = {
- .channel = BCM_SR_GENPLL5_FS_CLK,
- .flags = IPROC_CLK_AON,
+ [BCM_SR_GENPLL5_FS4_HF_CLK] = {
+ .channel = BCM_SR_GENPLL5_FS4_HF_CLK,
.enable = ENABLE_VAL(0x4, 6, 0, 12),
.mdiv = REG_VAL(0x18, 0, 9),
},
- [BCM_SR_GENPLL5_SPU_CLK] = {
- .channel = BCM_SR_GENPLL5_SPU_CLK,
- .flags = IPROC_CLK_AON,
- .enable = ENABLE_VAL(0x4, 6, 0, 12),
+ [BCM_SR_GENPLL5_CRYPTO_AE_CLK] = {
+ .channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK,
+ .enable = ENABLE_VAL(0x4, 7, 1, 12),
.mdiv = REG_VAL(0x18, 10, 9),
},
+ [BCM_SR_GENPLL5_RAID_AE_CLK] = {
+ .channel = BCM_SR_GENPLL5_RAID_AE_CLK,
+ .enable = ENABLE_VAL(0x4, 8, 2, 14),
+ .mdiv = REG_VAL(0x18, 20, 9),
+ },
};
static int sr_genpll5_clk_init(struct platform_device *pdev)
@@ -214,24 +300,30 @@ static const struct iproc_pll_ctrl sr_lcpll0 = {
};
static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
- [BCM_SR_LCPLL0_SATA_REF_CLK] = {
- .channel = BCM_SR_LCPLL0_SATA_REF_CLK,
+ [BCM_SR_LCPLL0_SATA_REFP_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFP_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 7, 1, 13),
.mdiv = REG_VAL(0x14, 0, 9),
},
- [BCM_SR_LCPLL0_USB_REF_CLK] = {
- .channel = BCM_SR_LCPLL0_USB_REF_CLK,
+ [BCM_SR_LCPLL0_SATA_REFN_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_REFN_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 8, 2, 14),
.mdiv = REG_VAL(0x14, 10, 9),
},
- [BCM_SR_LCPLL0_SATA_REFPN_CLK] = {
- .channel = BCM_SR_LCPLL0_SATA_REFPN_CLK,
+ [BCM_SR_LCPLL0_SATA_350_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_350_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 9, 3, 15),
.mdiv = REG_VAL(0x14, 20, 9),
},
+ [BCM_SR_LCPLL0_SATA_500_CLK] = {
+ .channel = BCM_SR_LCPLL0_SATA_500_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 10, 4, 16),
+ .mdiv = REG_VAL(0x18, 0, 9),
+ },
};
static int sr_lcpll0_clk_init(struct platform_device *pdev)
@@ -259,6 +351,18 @@ static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
.enable = ENABLE_VAL(0x0, 7, 1, 13),
.mdiv = REG_VAL(0x14, 0, 9),
},
+ [BCM_SR_LCPLL1_USB_REF_CLK] = {
+ .channel = BCM_SR_LCPLL1_USB_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 8, 2, 14),
+ .mdiv = REG_VAL(0x14, 10, 9),
+ },
+ [BCM_SR_LCPLL1_CRMU_TS_CLK] = {
+ .channel = BCM_SR_LCPLL1_CRMU_TS_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = ENABLE_VAL(0x0, 9, 3, 15),
+ .mdiv = REG_VAL(0x14, 20, 9),
+ },
};
static int sr_lcpll1_clk_init(struct platform_device *pdev)
@@ -298,6 +402,7 @@ static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
static const struct of_device_id sr_clk_dt_ids[] = {
{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+ { .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init },
{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
index cff6c6f..419011b 100644
--- a/include/dt-bindings/clock/bcm-sr.h
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -35,7 +35,7 @@
/* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
#define BCM_SR_GENPLL0 0
-#define BCM_SR_GENPLL0_SATA_CLK 1
+#define BCM_SR_GENPLL0_125M_CLK 1
#define BCM_SR_GENPLL0_SCR_CLK 2
#define BCM_SR_GENPLL0_250M_CLK 3
#define BCM_SR_GENPLL0_PCIE_AXI_CLK 4
@@ -50,9 +50,11 @@
/* GENPLL 2 clock channel ID NITRO MHB*/
#define BCM_SR_GENPLL2 0
#define BCM_SR_GENPLL2_NIC_CLK 1
-#define BCM_SR_GENPLL2_250_NITRO_CLK 2
+#define BCM_SR_GENPLL2_TS_500_CLK 2
#define BCM_SR_GENPLL2_125_NITRO_CLK 3
#define BCM_SR_GENPLL2_CHIMP_CLK 4
+#define BCM_SR_GENPLL2_NIC_FLASH_CLK 5
+#define BCM_SR_GENPLL2_FS4_CLK 6
/* GENPLL 3 HSLS clock channel ID */
#define BCM_SR_GENPLL3 0
@@ -62,11 +64,16 @@
/* GENPLL 4 SCR clock channel ID */
#define BCM_SR_GENPLL4 0
#define BCM_SR_GENPLL4_CCN_CLK 1
+#define BCM_SR_GENPLL4_TPIU_PLL_CLK 2
+#define BCM_SR_GENPLL4_NOC_CLK 3
+#define BCM_SR_GENPLL4_CHCLK_FS4_CLK 4
+#define BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK 5
/* GENPLL 5 FS4 clock channel ID */
#define BCM_SR_GENPLL5 0
-#define BCM_SR_GENPLL5_FS_CLK 1
-#define BCM_SR_GENPLL5_SPU_CLK 2
+#define BCM_SR_GENPLL5_FS4_HF_CLK 1
+#define BCM_SR_GENPLL5_CRYPTO_AE_CLK 2
+#define BCM_SR_GENPLL5_RAID_AE_CLK 3
/* GENPLL 6 NITRO clock channel ID */
#define BCM_SR_GENPLL6 0
@@ -74,13 +81,16 @@
/* LCPLL0 clock channel ID */
#define BCM_SR_LCPLL0 0
-#define BCM_SR_LCPLL0_SATA_REF_CLK 1
-#define BCM_SR_LCPLL0_USB_REF_CLK 2
-#define BCM_SR_LCPLL0_SATA_REFPN_CLK 3
+#define BCM_SR_LCPLL0_SATA_REFP_CLK 1
+#define BCM_SR_LCPLL0_SATA_REFN_CLK 2
+#define BCM_SR_LCPLL0_SATA_350_CLK 3
+#define BCM_SR_LCPLL0_SATA_500_CLK 4
/* LCPLL1 clock channel ID */
#define BCM_SR_LCPLL1 0
#define BCM_SR_LCPLL1_WAN_CLK 1
+#define BCM_SR_LCPLL1_USB_REF_CLK 2
+#define BCM_SR_LCPLL1_CRMU_TS_CLK 3
/* LCPLL PCIE clock channel ID */
#define BCM_SR_LCPLL_PCIE 0
--
2.1.4
Powered by blists - more mailing lists