[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <29aec3c3-61af-b814-351b-6faf31a8cea3@openedev.com>
Date: Fri, 1 Jun 2018 23:46:05 +0530
From: Jagan Teki <jagan@...nedev.com>
To: rah@...trans.net, Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-sunxi@...glegroups.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [linux-sunxi] [PATCH] arm: sun4i: Add support for Pengpod 1000
tablet
On 06/01/2018 11:25 PM, Bob Ham wrote:
> This is initial support for the Pengpod 1000 tablet. The display is
> not currently working but the UART, SD card and USB all work fine.
>
> Signed-off-by: Bob Ham <rah@...trans.net>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts | 232 +++++++++++++++++++++++++++
> 2 files changed, 233 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38543dc..e6e93e7ffc8b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -893,6 +893,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-olinuxino-lime.dtb \
> sun4i-a10-pcduino.dtb \
> sun4i-a10-pcduino2.dtb \
> + sun4i-a10-pengpod-1000.dtb \
> sun4i-a10-pov-protab2-ips9.dtb
> dtb-$(CONFIG_MACH_SUN5I) += \
> sun5i-a10s-auxtek-t003.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts b/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
> new file mode 100644
> index 000000000000..94560400114d
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
> @@ -0,0 +1,232 @@
> +/*
> + * Copyright 2015 Hans de Goede <hdegoede@...hat.com>
> + * Copyright 2017 Robert Ham <rah@...trans.net>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
We need to use SPDX-License for new dts files.
Powered by blists - more mailing lists