| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <eed9fbca1cd4f35a13aba7a07cd0f9cbaab73c26.1528040188.git.abdun.nihaal@gmail.com>
Date: Sun, 3 Jun 2018 21:30:00 +0530
From: Abdun Nihaal <abdun.nihaal@...il.com>
To: gregkh@...uxfoundation.org
Cc: matthias.bgg@...il.com, neil@...wn.name,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Abdun Nihaal <abdun.nihaal@...il.com>
Subject: [PATCH 3/7] staging: mt7621-pci: add space before open parenthesis
This fixes the following checkpatch error:
ERROR: space required before the open parenthesis '('
Signed-off-by: Abdun Nihaal <abdun.nihaal@...il.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 28 ++++++++++++-------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index fbcee58445b3..28b9a11e9ecb 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -155,13 +155,13 @@ extern void chk_phy_pll(void);
RALINK_RSTCTRL |= val; \
else \
RALINK_RSTCTRL &= ~val; \
- } while(0)
+ } while (0)
#define DEASSERT_SYSRST_PCIE(val) do { \
if (*(unsigned int *)(0xbe00000c) == 0x00030101) \
RALINK_RSTCTRL &= ~val; \
else \
RALINK_RSTCTRL |= val; \
- } while(0)
+ } while (0)
#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14)
#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30)
#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34)
@@ -210,7 +210,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
MV_WRITE(address_reg, address);
- switch(access_type) {
+ switch (access_type) {
case PCI_ACCESS_WRITE_1:
MV_WRITE_8(data_reg+(where&0x3), *data);
break;
@@ -374,12 +374,12 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 0 = %x\n", val);
printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- } else if((dev->bus->number == 0) && (slot == 0x1)) {
+ } else if ((dev->bus->number == 0) && (slot == 0x1)) {
write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 1 = %x\n", val);
printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
- } else if((dev->bus->number == 0) && (slot == 0x2)) {
+ } else if ((dev->bus->number == 0) && (slot == 0x2)) {
write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 2 = %x\n", val);
@@ -493,7 +493,7 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable
- if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ if (reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
printk("***** Xtal 40MHz *****\n");
} else { // 25MHz | 20MHz Xtal
@@ -516,7 +516,7 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
- if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ if (reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
}
@@ -533,7 +533,7 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable
- if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ if (reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
} else { // 25MHz | 20MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
@@ -552,7 +552,7 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN
- if(reg <= 5 && reg >= 3) { // 40MHz Xtal
+ if (reg <= 5 && reg >= 3) { // 40MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv
}
@@ -663,7 +663,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
mdelay(500);
#if defined (CONFIG_PCIE_PORT0)
- if((RALINK_PCI0_STATUS & 0x1) == 0)
+ if ((RALINK_PCI0_STATUS & 0x1) == 0)
{
printk("PCIE0 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
@@ -675,7 +675,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
}
#endif
#if defined (CONFIG_PCIE_PORT1)
- if((RALINK_PCI1_STATUS & 0x1) == 0)
+ if ((RALINK_PCI1_STATUS & 0x1) == 0)
{
printk("PCIE1 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
@@ -711,7 +711,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
3'b110 1 0 x
3'b111 2 1 0
*/
- switch(pcie_link_status) {
+ switch (pcie_link_status) {
case 2:
RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0
@@ -749,7 +749,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
#if defined (CONFIG_PCIE_PORT0)
//PCIe0
- if((pcie_link_status & 0x1) != 0) {
+ if ((pcie_link_status & 0x1) != 0) {
RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE
RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
RALINK_PCI0_CLASS = 0x06040001;
@@ -776,7 +776,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
#endif
- switch(pcie_link_status) {
+ switch (pcie_link_status) {
case 7:
read_config(0, 2, 0, 0x4, &val);
write_config(0, 2, 0, 0x4, val|0x4);
--
2.17.0
Powered by blists - more mailing lists