[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <be5cc865-608b-dabb-2a3c-b5864c387d64@mm-sol.com>
Date: Mon, 4 Jun 2018 16:50:24 +0300
From: Stanimir Varbanov <stanimir.varbanov@...aro.org>
To: Vikash Garodia <vgarodia@...eaurora.org>, hverkuil@...all.nl,
mchehab@...nel.org, robh@...nel.org, mark.rutland@....com,
andy.gross@...aro.org, bjorn.andersson@...aro.org,
stanimir.varbanov@...aro.org
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, acourbot@...omium.org
Subject: Re: [PATCH v2 2/5] media: venus: add a routine to set venus state
Hi Vikash,
Thanks for the patch!
On 1.06.2018 23:26, Vikash Garodia wrote:
> Add a new routine which abstracts the TZ call to
Actually the new routine abstracts Venus CPU state, Isn't it?
> set the video hardware state.
>
> Signed-off-by: Vikash Garodia <vgarodia@...eaurora.org>
> ---
> drivers/media/platform/qcom/venus/core.h | 5 +++++
> drivers/media/platform/qcom/venus/firmware.c | 28 +++++++++++++++++++++++++++
> drivers/media/platform/qcom/venus/firmware.h | 1 +
> drivers/media/platform/qcom/venus/hfi_venus.c | 13 ++++---------
> 4 files changed, 38 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 85e66e2..e7bfb63 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -35,6 +35,11 @@ struct reg_val {
> u32 value;
> };
>
> +enum tzbsp_video_state {
> + TZBSP_VIDEO_SUSPEND = 0,
> + TZBSP_VIDEO_RESUME
> +};
please move this in firmware.c, for more see below.
> +
> struct venus_resources {
> u64 dma_mask;
> const struct freq_tbl *freq_tbl;
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 7d89b5a..b4664ed 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -53,6 +53,34 @@ static void venus_reset_hw(struct venus_core *core)
> /* Bring Arm9 out of reset */
> writel_relaxed(0, reg_base + WRAPPER_A9SS_SW_RESET);
> }
> +
> +int venus_set_hw_state(enum tzbsp_video_state state, struct venus_core *core)
can we put this function this way:
venus_set_state(struct venus_core *core, bool on)
so we set the state to On when we are power-up the venus CPU and Off
when we power-down.
by this way we really abstract the state, IMO.
> +{
> + int ret;
> + struct device *dev = core->dev;
> + void __iomem *reg_base = core->base;
just 'base' should be enough.
> +
> + switch (state) {
> + case TZBSP_VIDEO_SUSPEND:
> + if (qcom_scm_is_available())
You really shouldn't rely on this function (see the comment from Bjorn
on first version of this patch series).
I think we have to replace qcom_scm_is_available() with some flag which
is reflecting does the firmware subnode is exist or not. In case it is
not exist the we have to go with TZ scm calls.
> + ret = qcom_scm_set_remote_state(TZBSP_VIDEO_SUSPEND, 0);
> + else
> + writel_relaxed(1, reg_base + WRAPPER_A9SS_SW_RESET);
> + break;
> + case TZBSP_VIDEO_RESUME:
> + if (qcom_scm_is_available())
> + ret = qcom_scm_set_remote_state(TZBSP_VIDEO_RESUME, 0);
> + else
> + venus_reset_hw(core);
> + break;
> + default:
> + dev_err(dev, "invalid state\n");
> + break;
> + }
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(venus_set_hw_state);
> +
regards,
Stan
Powered by blists - more mailing lists