lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <8ac6dddc-c914-92c5-2a97-85be6f7c0ee3@ti.com>
Date:   Tue, 5 Jun 2018 15:37:07 +0530
From:   Keerthy <j-keerthy@...com>
To:     <nsekhar@...com>
CC:     <khilman@...nel.org>, <robh+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: davinci: da850: Fix interrups property for gpio



On Tuesday 05 June 2018 03:35 PM, Keerthy wrote:
> The intc #interrupt-cells is equal to 1. Currently gpio
> node has 2 cells per IRQ which is wrong. Remove the additional
> cell for each of the interrupts.

Just noticed $Subject is not quite right. I will fix and send a v2 in a bit.

> 
> Signed-off-by: Keerthy <j-keerthy@...com>
> Fixes: 2e38b946dc54 ("ARM: davinci: da850: add GPIO DT node")
> ---
>  arch/arm/boot/dts/da850.dtsi | 6 +-----
>  1 file changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index f6f1597..0f4f817 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -549,11 +549,7 @@
>  			gpio-controller;
>  			#gpio-cells = <2>;
>  			reg = <0x226000 0x1000>;
> -			interrupts = <42 IRQ_TYPE_EDGE_BOTH
> -				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
> -				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
> -				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
> -				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
> +			interrupts = <42 43 44 45 46 47 48 49 50>;
>  			ti,ngpio = <144>;
>  			ti,davinci-gpio-unbanked = <0>;
>  			status = "disabled";
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ