[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180607135133.3104-2-jagan@amarulasolutions.com>
Date: Thu, 7 Jun 2018 19:21:32 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <fabio.estevam@....com>,
Matteo Lisi <matteo.lisi@...icam.com>,
Michael Trimarchi <michael@...rulasolutions.com>,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 2/3] ARM: dts: imx6q-icore-mipi: Add OV5640 Camera sensor
OV5640 Camera sensor is connected in i.CoreM6 1.5 Quad/Dual MIPI
starter kit.
This patch also move MX6QDL_PAD_GPIO_0__CCM_CLKO1 pinctrl
from i2c3 to ov5640 pinctrl.
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
arch/arm/boot/dts/imx6q-icore-mipi.dts | 8 ++++++
arch/arm/boot/dts/imx6qdl-icore.dtsi | 46 +++++++++++++++++++++++++++++++++-
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index acd3d33476d4..95b2efda17b4 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -20,6 +20,14 @@
status = "okay";
};
+&mipi_csi {
+ status = "okay";
+};
+
+&ov5640 {
+ status = "okay";
+};
+
&usdhc3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 0a1574998fc6..be8aa55c973e 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -215,6 +215,29 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5640>;
+ reg = <0x3c>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "xclk";
+ DOVDD-supply = <®_1p8v>;
+ AVDD-supply = <®_3p3v>;
+ DVDD-supply = <®_3p3v>;
+ powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ port {
+ ov5640_to_mipi_csi2: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
sgtl5000: codec@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
@@ -226,6 +249,20 @@
};
};
+&mipi_csi {
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+};
+
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
@@ -353,7 +390,14 @@
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_ov5640: ov5640grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
--
2.14.3
Powered by blists - more mailing lists