linux-kernel - [PATCH 2/3] net: phy: xgmiitorgmii: Use correct mdio bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180607155348.149665-2-brandon.maier@rockwellcollins.com>
Date:   Thu,  7 Jun 2018 10:53:47 -0500
From:   Brandon Maier <brandon.maier@...kwellcollins.com>
To:     netdev@...r.kernel.org
Cc:     andrew@...n.ch, f.fainelli@...il.com, davem@...emloft.net,
        michal.simek@...inx.com, clayton.shotwell@...kwellcollins.com,
        kristopher.cory@...kwellcollins.com, linux-kernel@...r.kernel.org,
        Brandon Maier <brandon.maier@...kwellcollins.com>
Subject: [PATCH 2/3] net: phy: xgmiitorgmii: Use correct mdio bus

The xgmiitorgmii is using the mii_bus of the device it's attached too,
instead of the bus it was given during probe.

Signed-off-by: Brandon Maier <brandon.maier@...kwellcollins.com>
---
 drivers/net/phy/xilinx_gmii2rgmii.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index 04c8bec1c4c1..d6f8b64cddbe 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -33,17 +33,19 @@ struct gmii2rgmii {
 	struct phy_device *phy_dev;
 	struct phy_driver *phy_drv;
 	struct phy_driver conv_phy_drv;
-	int addr;
+	struct mdio_device *mdio;
 };
 
 static int xgmiitorgmii_read_status(struct phy_device *phydev)
 {
 	struct gmii2rgmii *priv = phydev->priv;
+	struct mii_bus *bus = priv->mdio->bus;
+	int addr = priv->mdio->addr;
 	u16 val = 0;
 
 	priv->phy_drv->read_status(phydev);
 
-	val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
+	val = mdiobus_read(bus, addr, XILINX_GMII2RGMII_REG);
 	val &= ~XILINX_GMII2RGMII_SPEED_MASK;
 
 	if (phydev->speed == SPEED_1000)
@@ -53,7 +55,7 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
 	else
 		val |= BMCR_SPEED10;
 
-	mdiobus_write(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG, val);
+	mdiobus_write(bus, addr, XILINX_GMII2RGMII_REG, val);
 
 	return 0;
 }
@@ -86,7 +88,7 @@ static int xgmiitorgmii_probe(struct mdio_device *mdiodev)
 		return -EPROBE_DEFER;
 	}
 
-	priv->addr = mdiodev->addr;
+	priv->mdio = mdiodev;
 	priv->phy_drv = priv->phy_dev->drv;
 	memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
 	       sizeof(struct phy_driver));
-- 
2.14.3