| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1528455990-24572-3-git-send-email-sayalil@codeaurora.org>
Date: Fri, 8 Jun 2018 16:36:29 +0530
From: Sayali Lokhande <sayalil@...eaurora.org>
To: subhashj@...eaurora.org, cang@...eaurora.org,
vivek.gautam@...eaurora.org, rnayak@...eaurora.org,
vinholikatti@...il.com, jejb@...ux.vnet.ibm.com,
martin.petersen@...cle.com, asutoshd@...eaurora.org,
evgreen@...omium.org
Cc: linux-scsi@...r.kernel.org,
Sayali Lokhande <sayalil@...eaurora.org>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V2 2/3] scsi: ufs: Add ufs provisioning support
A new api ufshcd_do_config_device() is added in driver
to support UFS provisioning at runtime. Sysfs support
is added to trigger provisioning.
Device and Unit configurable parameters are parsed from
vendor specific provisioning data or file and
passed via sysfs at runtime to provision ufs device.
Signed-off-by: Sayali Lokhande <sayalil@...eaurora.org>
---
drivers/scsi/ufs/ufs.h | 28 +++++++
drivers/scsi/ufs/ufshcd.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.h | 1 +
3 files changed, 210 insertions(+)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index e15deb0..1f99904 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -333,6 +333,7 @@ enum {
UFSHCD_AMP = 3,
};
+#define UFS_BLOCK_SIZE 4096
#define POWER_DESC_MAX_SIZE 0x62
#define POWER_DESC_MAX_ACTV_ICC_LVLS 16
@@ -425,6 +426,33 @@ enum {
MASK_TM_SERVICE_RESP = 0xFF,
};
+struct ufs_unit_desc {
+ u8 bLUEnable; /* 1 for enabled LU */
+ u8 bBootLunID; /* 0 for using this LU for boot */
+ u8 bLUWriteProtect; /* 1 = power on WP, 2 = permanent WP */
+ u8 bMemoryType; /* 0 for enhanced memory type */
+ u32 dNumAllocUnits; /* Number of alloc unit for this LU */
+ u8 bDataReliability; /* 0 for reliable write support */
+ u8 bLogicalBlockSize; /* See section 13.2.3 of UFS standard */
+ u8 bProvisioningType; /* 0 for thin provisioning */
+ u16 wContextCapabilities; /* refer Unit Descriptor Description */
+};
+
+struct ufs_config_descr {
+ u8 bNumberLU; /* Total number of active LUs */
+ u8 bBootEnable; /* enabling device for partial init */
+ u8 bDescrAccessEn; /* desc access during partial init */
+ u8 bInitPowerMode; /* Initial device power mode */
+ u8 bHighPriorityLUN; /* LUN of the high priority LU */
+ u8 bSecureRemovalType; /* Erase config for data removal */
+ u8 bInitActiveICCLevel; /* ICC level after reset */
+ u16 wPeriodicRTCUpdate; /* 0 to set a priodic RTC update rate */
+ u32 bConfigDescrLock; /* 1 to lock Configation Descriptor */
+ u32 qVendorConfigCode; /* Vendor specific configuration code */
+ struct ufs_unit_desc unit[8];
+ u8 lun_to_grow;
+};
+
/* Task management service response */
enum {
UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4abc7ae..8975449 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -42,6 +42,7 @@
#include <linux/nls.h>
#include <linux/of.h>
#include <linux/bitfield.h>
+#include <asm/unaligned.h>
#include "ufshcd.h"
#include "ufs_quirks.h"
#include "unipro.h"
@@ -237,6 +238,7 @@ static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *desired_pwr_mode);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *pwr_mode);
+static int ufshcd_do_config_device(struct ufs_hba *hba);
static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
{
return tag >= 0 && tag < hba->nutrs;
@@ -3063,6 +3065,14 @@ static inline int ufshcd_read_power_desc(struct ufs_hba *hba,
return ufshcd_read_desc(hba, QUERY_DESC_IDN_POWER, 0, buf, size);
}
+static inline int ufshcd_read_geometry_desc(struct ufs_hba *hba,
+ u8 *buf,
+ u32 size)
+{
+ return ufshcd_read_desc(hba, QUERY_DESC_IDN_GEOMETRY, 0, buf, size);
+}
+
+
static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size)
{
return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size);
@@ -6344,6 +6354,177 @@ static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba)
}
/**
+ * ufshcd_do_config_device - API function for UFS provisioning
+ * hba: per-adapter instance
+ * Returns 0 for success, non-zero in case of failure.
+ */
+static int ufshcd_do_config_device(struct ufs_hba *hba)
+{
+ struct ufs_config_descr *cfg = &hba->cfgs;
+ int buff_len = QUERY_DESC_CONFIGURATION_DEF_SIZE;
+ u8 desc_buf[QUERY_DESC_CONFIGURATION_DEF_SIZE] = {0};
+ int i, ret = 0;
+ int lun_to_grow = -1;
+ u64 qTotalRawDeviceCapacity;
+ u16 wEnhanced1CapAdjFac, wEnhanced2CapAdjFac;
+ u32 dEnhanced1MaxNAllocU, dEnhanced2MaxNAllocU;
+ size_t alloc_units, units_to_create = 0;
+ size_t capacity_to_alloc_factor;
+ size_t enhanced1_units = 0, enhanced2_units = 0;
+ size_t conversion_ratio = 1;
+ u8 *pt;
+ u32 blocks_per_alloc_unit = 1024;
+ int geo_len = hba->desc_size.geom_desc;
+ u8 geo_buf[hba->desc_size.geom_desc];
+ unsigned int max_partitions = 8;
+
+ WARN_ON(!hba || !cfg);
+
+ ret = ufshcd_read_geometry_desc(hba, geo_buf, geo_len);
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed getting geometry_desc %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Get Geomtric parameters like total configurable memory
+ * quantity (Offset 0x04 to 0x0b), Capacity Adjustment
+ * Factors (Offset 0x30, 0x31, 0x36, 0x37), Max allocation
+ * units (Offset 0x2c to 0x2f, 0x32 to 0x35) used to configure
+ * the device logical units.
+ */
+ qTotalRawDeviceCapacity = get_unaligned_be64(&geo_buf[0x04]);
+ wEnhanced1CapAdjFac = get_unaligned_be16(&geo_buf[0x30]);
+ wEnhanced2CapAdjFac = get_unaligned_be16(&geo_buf[0x36]);
+ dEnhanced1MaxNAllocU = get_unaligned_be32(&geo_buf[0x2c]);
+ dEnhanced2MaxNAllocU = get_unaligned_be32(&geo_buf[0x32]);
+
+ capacity_to_alloc_factor =
+ (blocks_per_alloc_unit * UFS_BLOCK_SIZE) / 512;
+
+ if (qTotalRawDeviceCapacity % capacity_to_alloc_factor != 0) {
+ dev_err(hba->dev,
+ "%s: Raw capacity(%llu) not multiple of alloc factor(%zu)\n",
+ __func__, qTotalRawDeviceCapacity,
+ capacity_to_alloc_factor);
+ return -EINVAL;
+ }
+ alloc_units = (qTotalRawDeviceCapacity / capacity_to_alloc_factor);
+ units_to_create = 0;
+ enhanced1_units = enhanced2_units = 0;
+
+ /*
+ * Calculate number of allocation units to be assigned to a logical unit
+ * considering the capacity adjustment factor of respective memory type.
+ */
+ for (i = 0; i < (max_partitions - 1) &&
+ units_to_create <= alloc_units; i++) {
+ if ((cfg->unit[i].dNumAllocUnits % blocks_per_alloc_unit) == 0)
+ cfg->unit[i].dNumAllocUnits /= blocks_per_alloc_unit;
+ else
+ cfg->unit[i].dNumAllocUnits =
+ cfg->unit[i].dNumAllocUnits / blocks_per_alloc_unit + 1;
+
+ if (cfg->unit[i].bMemoryType == 0)
+ units_to_create += cfg->unit[i].dNumAllocUnits;
+ else if (cfg->unit[i].bMemoryType == 3) {
+ enhanced1_units += cfg->unit[i].dNumAllocUnits;
+ cfg->unit[i].dNumAllocUnits *=
+ (wEnhanced1CapAdjFac / 0x100);
+ units_to_create += cfg->unit[i].dNumAllocUnits;
+ } else if (cfg->unit[i].bMemoryType == 4) {
+ enhanced2_units += cfg->unit[i].dNumAllocUnits;
+ cfg->unit[i].dNumAllocUnits *=
+ (wEnhanced1CapAdjFac / 0x100);
+ units_to_create += cfg->unit[i].dNumAllocUnits;
+ } else {
+ dev_err(hba->dev, "%s: Unsupported memory type %d\n",
+ __func__, cfg->unit[i].bMemoryType);
+ return -EINVAL;
+ }
+ }
+ if (enhanced1_units > dEnhanced1MaxNAllocU) {
+ dev_err(hba->dev, "%s: size %zu exceeds max enhanced1 area size %u\n",
+ __func__, enhanced1_units, dEnhanced1MaxNAllocU);
+ return -ERANGE;
+ }
+ if (enhanced2_units > dEnhanced2MaxNAllocU) {
+ dev_err(hba->dev, "%s: size %zu exceeds max enhanced2 area size %u\n",
+ __func__, enhanced2_units, dEnhanced2MaxNAllocU);
+ return -ERANGE;
+ }
+ if (units_to_create > alloc_units) {
+ dev_err(hba->dev, "%s: Specified size %zu exceeds device size %zu\n",
+ __func__, units_to_create, alloc_units);
+ return -ERANGE;
+ }
+ lun_to_grow = cfg->lun_to_grow;
+ if (lun_to_grow != -1) {
+ if (cfg->unit[i].bMemoryType == 0)
+ conversion_ratio = 1;
+ else if (cfg->unit[i].bMemoryType == 3)
+ conversion_ratio = (wEnhanced1CapAdjFac / 0x100);
+ else if (cfg->unit[i].bMemoryType == 4)
+ conversion_ratio = (wEnhanced2CapAdjFac / 0x100);
+
+ cfg->unit[lun_to_grow].dNumAllocUnits +=
+ ((alloc_units - units_to_create) / conversion_ratio);
+ dev_dbg(hba->dev, "%s: conversion_ratio %zu for lun %d\n",
+ __func__, conversion_ratio, i);
+ }
+
+ /* Fill in the buffer with configuration data */
+ pt = desc_buf;
+ *pt++ = 0x90; // bLength
+ *pt++ = 0x01; // bDescriptorType
+ *pt++ = 0; // Reserved in UFS2.0 and onward
+ *pt++ = cfg->bBootEnable;
+ *pt++ = cfg->bDescrAccessEn;
+ *pt++ = cfg->bInitPowerMode;
+ *pt++ = cfg->bHighPriorityLUN;
+ *pt++ = cfg->bSecureRemovalType;
+ *pt++ = cfg->bInitActiveICCLevel;
+ put_unaligned_be16(cfg->wPeriodicRTCUpdate, pt);
+ pt = pt + 7; // Reserved fields set to 0
+
+ /* Fill in the buffer with per logical unit data */
+ for (i = 0; i < UFS_UPIU_MAX_GENERAL_LUN; i++) {
+ *pt++ = cfg->unit[i].bLUEnable;
+ *pt++ = cfg->unit[i].bBootLunID;
+ *pt++ = cfg->unit[i].bLUWriteProtect;
+ *pt++ = cfg->unit[i].bMemoryType;
+ put_unaligned_be32(cfg->unit[i].dNumAllocUnits, pt);
+ pt = pt + 4;
+ *pt++ = cfg->unit[i].bDataReliability;
+ *pt++ = cfg->unit[i].bLogicalBlockSize;
+ *pt++ = cfg->unit[i].bProvisioningType;
+ put_unaligned_be16(cfg->unit[i].wContextCapabilities, pt);
+ pt = pt + 5; // Reserved fields set to 0
+ }
+
+ ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_WRITE_DESC,
+ QUERY_DESC_IDN_CONFIGURATION, 0, 0, desc_buf, &buff_len);
+
+ if (ret) {
+ dev_err(hba->dev, "%s: Failed writing descriptor. desc_idn %d, opcode %x ret %d\n",
+ __func__, QUERY_DESC_IDN_CONFIGURATION,
+ UPIU_QUERY_OPCODE_WRITE_DESC, ret);
+ return ret;
+ }
+
+ if (cfg->bConfigDescrLock == 1) {
+ ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
+ QUERY_ATTR_IDN_CONF_DESC_LOCK, 0, 0, &cfg->bConfigDescrLock);
+ if (ret)
+ dev_err(hba->dev, "%s: Failed writing bConfigDescrLock %d\n",
+ __func__, ret);
+ }
+
+ return ret;
+}
+
+/**
* ufshcd_probe_hba - probe hba to detect device and initialize
* @hba: per-adapter instance
*
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index b026ad8..982bfdf 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -549,6 +549,7 @@ struct ufs_hba {
unsigned int irq;
bool is_irq_enabled;
u32 dev_ref_clk_freq;
+ struct ufs_config_descr cfgs;
/* Interrupt aggregation support is broken */
#define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists