linux-kernel - Re: 4.16.14: kernel tried to execute NX-protected page [after USB device went to charging state]

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180611152541.GB13775@localhost>
Date:   Mon, 11 Jun 2018 17:25:41 +0200
From:   Johan Hovold <johan@...nel.org>
To:     Udo van den Heuvel <udovdh@...all.nl>
Cc:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        linux-usb@...r.kernel.org
Subject: Re: 4.16.14: kernel tried to execute NX-protected page [after USB
 device went to charging state]

[ +CC: linux-usb, even if this does not look like a USB issue ] 

On Sat, Jun 09, 2018 at 11:50:34AM +0200, Udo van den Heuvel wrote:
> Hello,
> 
> My Holus GPSport 245 was used to download a gpx track. Afterwards I 
> turned the device off while it was attached to USB so it could charge.
> Later I found these messages you can find below.
> Is this an actual bug?

Well, you've got some kind of corruption going on somewhere.

> [223632.768623] usb 1-7: cp210x converter now attached to ttyUSB0
> [225389.048501] usb 1-7: USB disconnect, device number 6
> [225389.048758] cp210x ttyUSB0: cp210x converter now disconnected from 
> ttyUSB0
> [225389.048785] kernel tried to execute NX-protected page - exploit 
> attempt? (uid: 0)
> [225389.048788] BUG: unable to handle kernel paging request at 
> ffffffffc08b64e0
> [225389.048797] IP: usb_serial_exit+0x35df/0xff [usbserial]
> [225389.048799] PGD 2ea00c067 P4D 2ea00c067 PUD 2ea00e067 PMD 408590067 
> PTE 8000000109510163
> [225389.048807] Oops: 0011 [#1] PREEMPT SMP NOPTI
> [225389.048809] Modules linked in: cp210x usbserial it87(O) hwmon_vid 

First, please try and reproduce this after blacklisting this out-of-tree
it87 module.

> fuse ipt_REJECT nf_reject_ipv4 xt_u32 xt_multiport iptable_filter 
> ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat cpufreq_userspace 
> nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT 
> nf_reject_ipv6 xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack 
> msr nf_conntrack ip6table_filter ip6_tables eeprom uvcvideo 
> videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_usb_audio videodev 
> snd_hwdep videobuf2_common cdc_acm snd_usbmidi_lib snd_rawmidi amdgpu 
> snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec 
> snd_hda_core snd_seq snd_seq_device snd_pcm chash snd_timer gpu_sched 
> backlight snd ttm i2c_piix4 evdev acpi_cpufreq k10temp nfsd auth_rpcgss 
> nfs_acl
> [225389.048857]  lockd grace sunrpc binfmt_misc ip_tables x_tables 
> hid_generic sr_mod cdrom usbhid i2c_dev autofs4 [last unloaded: hwmon_vid]
> [225389.048871] CPU: 1 PID: 5717 Comm: kworker/1:2 Tainted: G 
> O     4.16.14 #5
> [225389.048873] Hardware name: Gigabyte Technology Co., Ltd. X470 AORUS 
> ULTRA GAMING/X470 AORUS ULTRA GAMING-CF, BIOS F3g 05/10/2018
> [225389.048880] Workqueue: usb_hub_wq hub_event
> [225389.048886] RIP: 0010:usb_serial_exit+0x35df/0xff [usbserial]
> [225389.048889] RSP: 0018:ffff90d3c8c27be8 EFLAGS: 00010282
> [225389.048892] RAX: ffffffffc08b64e0 RBX: ffff8bd5d2190ae8 RCX: 
> 0000000000000000
> [225389.048895] RDX: 0000000080000001 RSI: 0000000000000282 RDI: 
> ffff8bd5d2190ad8
> [225389.048897] RBP: ffff8bd5d2190ad8 R08: 0000000000000000 R09: 
> 0000000000000000
> [225389.048899] R10: 0000000000000000 R11: 0000000000000000 R12: 
> ffff8bd392029480
> [225389.048902] R13: ffff8bd64b4d4e00 R14: ffff8bd64d2fc030 R15: 
> ffff8bd64d2fc030
> [225389.048905] FS:  0000000000000000(0000) GS:ffff8bd65ee40000(0000) 
> knlGS:0000000000000000
> [225389.048908] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [225389.048910] CR2: ffffffffc08b64e0 CR3: 00000003f0b50000 CR4: 
> 00000000003406e0
> [225389.048912] Call Trace:
> [225389.048918]  ? device_release+0x39/0xa0
> [225389.048924]  ? kobject_put+0xa1/0x1c0
> [225389.048929]  ? usb_serial_put+0x4c/0xf0 [usbserial]
> [225389.048933]  ? usb_serial_disconnect+0xdd/0x100 [usbserial]
> [225389.048938]  ? usb_unbind_interface+0x66/0x1e0
> [225389.048942]  ? device_release_driver_internal+0x17a/0x230
> [225389.048946]  ? bus_remove_device+0xe0/0x150
> [225389.048950]  ? device_del+0x129/0x330
> [225389.048954]  ? usb_disable_device+0x8d/0x230
> [225389.048958]  ? usb_disconnect+0xb1/0x270
> [225389.048962]  ? hub_event+0x5f5/0x13b0
> [225389.048967]  ? SyS_uname+0x11/0xa0
> [225389.048971]  ? process_one_work+0x1a1/0x2f0
> [225389.048974]  ? worker_thread+0x26/0x3f0
> [225389.048978]  ? process_one_work+0x2f0/0x2f0
> [225389.048982]  ? kthread+0x109/0x120
> [225389.048986]  ? kthread_create_on_node+0x60/0x60
> [225389.048991]  ? ret_from_fork+0x22/0x40
> [225389.048994] Code: ff ff ff 29 1a 8b c0 ff ff ff ff 50 73 8b c0 ff ff 
> ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00 <e0> 34 8b c0 ff ff ff ff 00 00 00 00 00 00 00 00 00 65 8b c0 ff
> [225389.049043] RIP: usb_serial_exit+0x35df/0xff [usbserial] RSP: 
> ffff90d3c8c27be8
> [225389.049045] CR2: ffffffffc08b64e0
> [225389.049048] ---[ end trace 43c4e5674b0ca81f ]---

This looks to me like you've got a struct device whose release pointer
is pointing into a non-executable page.

The IP symbol looks weird

	usb_serial_exit+0x35df/0xff

but this could correspond with usb_serial_port_release (check
/proc/kallsyms as root).

Enabling dynamic debugging for usbserial might give some indication of
how far you get in usb_serial_put(), but this smells like an x86/mem
(or hardware?) issue.

Did you say you could reproduce this easily?

Johan