| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Jun 2018 13:33:07 -0500
From: Tom Lendacky <thomas.lendacky@....com>
To: Don Bollinger <don@...bollingers.org>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org
Cc: brandon_chuang@...e-core.com, wally_wang@...ton.com,
roy_lee@...e-core.com, rick_burchett@...e-core.com,
quentin.chang@...ntatw.com, jeffrey.townsend@...switch.com,
scotte@...ulusnetworks.com, roopa@...ulusnetworks.com,
David Ahern <dsa@...ulusnetworks.com>,
luke.williams@...onical.com, Guohan Lu <gulv@...rosoft.com>,
Russell King <rmk+kernel@....linux.org.uk>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH] optoe: driver to read/write SFP/QSFP EEPROMs
On 6/10/2018 11:25 PM, Don Bollinger wrote:
> optoe is an i2c based driver that supports read/write access to all
> the pages (tables) of MSA standard SFP and similar devices (conforming
> to the SFF-8472 spec) and MSA standard QSFP and similar devices
> (conforming to the SFF-8436 spec).
>
> These devices provide identification, operational status and control
> registers via an EEPROM model. These devices support one or 3 fixed
> pages (128 bytes) of data, and one page that is selected via a page
> register on the first fixed page. Thus the driver's main task is
> to map these pages onto a simple linear address space for user space
> management applications. See the driver code for a detailed layout.
>
> EEPROM data is accessible via a bin_attribute file called 'eeprom',
> e.g. /sys/bus/i2c/devices/24-0050/eeprom.
>
> Signed-off-by: Don Bollinger <don@...bollingers.org>
> ---
>
> Why should this driver be in the Linux kernel? SFP and QSFP devices plug
> into switches to convert electrical to optical signals and drive the
> optical signal over fiber optic cables. They provide status and control
> registers through an i2c interface similar to to other EEPROMS. However,
> they have a paging mechanism that is unique, which requires a different
> driver from (for example) at24. Various drivers have been developed for
> this purpose, none of them support both SFP and QSFP, provide both read
> and write access, and access all 256 architected pages. optoe does all
> of these.
>
> optoe has been adopted and is shipping to customers as a base module,
> available to all platforms (switches) and used by multiple vendors and
> platforms on both ONL (Open Network Linux) and SONiC (Microsoft's
> 'Software for Open Networking in the Cloud').
>
> This patch has been built on the latest staging-testing kernel. It has
> built and tested with SFP and QSFP devices on an ARM platform with a 4.9
> kernel, and an x86 switch with a 3.16 kernel. This patch should install
> and build clean on any kernel from 3.16 up to the latest (as of 6/10/2018).
>
>
> Documentation/misc-devices/optoe.txt | 56 ++
> drivers/misc/eeprom/Kconfig | 18 +
> drivers/misc/eeprom/Makefile | 1 +
> drivers/misc/eeprom/optoe.c | 1141 ++++++++++++++++++++++++++++++++++
> 4 files changed, 1216 insertions(+)
> create mode 100644 Documentation/misc-devices/optoe.txt
> create mode 100644 drivers/misc/eeprom/optoe.c
>
There's an SFP driver under drivers/net/phy. Can that driver be extended
to provide this support? Adding Russel King who developed sfp.c, as well
at the netdev mailing list.
Thanks,
Tom
> diff --git a/Documentation/misc-devices/optoe.txt b/Documentation/misc-devices/optoe.txt
> new file mode 100644
> index 000000000000..496134940147
> --- /dev/null
> +++ b/Documentation/misc-devices/optoe.txt
> @@ -0,0 +1,56 @@
> +optoe driver
> +
> +Author Don Bollinger (don@...bollingers.org)
> +
> +Optoe is an i2c based driver that supports read/write access to all
> +the pages (tables) of MSA standard SFP and similar devices (conforming
> +to the SFF-8472 spec) and MSA standard QSFP and similar devices
> +(conforming to the SFF-8436 spec).
> +
> +i2c based optoelectronic transceivers (SPF, QSFP, etc) provide identification,
> +operational status, and control registers via an EEPROM model. Unlike the
> +EEPROMs that at24 supports, these devices access data beyond byte 256 via
> +a page select register, which must be managed by the driver. See the driver
> +code for a detailed explanation of how the linear address space provided
> +by the driver maps to the paged address space provided by the devices.
> +
> +The EEPROM data is accessible via a bin_attribute file called 'eeprom',
> +e.g. /sys/bus/i2c/devices/24-0050/eeprom
> +
> +This driver also reports the port number for each device, via a sysfs
> +attribute: 'port_name'. This is a read/write attribute. It should be
> +explicitly set as part of system initialization, ideally at the same time
> +the device is instantiated. Write an appropriate port name (any string, up
> +to 19 characters) to initialize. If not initialized explicitly, all ports
> +will have the port_name of 'unitialized'. Alternatively, if the driver is
> +called with platform_data, the port_name will be read from eeprom_data->label
> +(if the EEPROM CLASS driver is configured) or from platform_data.port_name.
> +
> +This driver can be instantiated with 'new_device', per the convention
> +described in Documentation/i2c/instantiating-devices. It wants one of
> +two possible device identifiers. Use 'optoe1' to indicate this is a device
> +with just one i2c address (all QSFP type devices). Use 'optoe2' to indicate
> +this is a device with two i2c addresses (all SFP type devices).
> +
> +Example:
> +# echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-64/new_device
> +# echo port54 > /sys/bus/i2c/devices/i2c-64/port_name
> +
> +This will add a QSFP type device to i2c bus i2c-64, and name it 'port54'
> +
> +Example:
> +# echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-11/new_device
> +# echo port1 > /sys/bus/i2c/devices/i2c-11/port_name
> +
> +This will add an SFP type device to i2c bus i2c-11, and name it 'port1'
> +
> +The second parameter to new_device is an i2c address, and MUST be 0x50 for
> +this driver to work properly. This is part of the spec for these devices.
> +(It is not necessary to create a device at 0x51 for SFP type devices, the
> +driver does that automatically.)
> +
> +Note that SFP type and QSFP type devices are not plug-compatible. The
> +driver expects the correct ID for each port (each i2c device). It does
> +not check because the port will often be empty, and the only way to check
> +is to interrogate the device. Incorrect choice of ID will lead to correct
> +data being reported for the first 256 bytes, incorrect data after that.
> diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
> index 68a1ac929917..9a08e12756ee 100644
> --- a/drivers/misc/eeprom/Kconfig
> +++ b/drivers/misc/eeprom/Kconfig
> @@ -111,4 +111,22 @@ config EEPROM_IDT_89HPESX
> This driver can also be built as a module. If so, the module
> will be called idt_89hpesx.
>
> +config EEPROM_OPTOE
> + tristate "read/write access to SFP* & QSFP* EEPROMs"
> + depends on I2C && SYSFS
> + help
> + If you say yes here you get support for read and write access to
> + the EEPROM of SFP and QSFP type optical and copper transceivers.
> + Includes all devices which conform to the sff-8436 and sff-8472
> + spec including SFP, SFP+, SFP28, SFP-DWDM, QSFP, QSFP+, QSFP28
> + or later. These devices are usually found in network switches.
> +
> + This driver only manages read/write access to the EEPROM, all
> + other features should be accessed via i2c-dev.
> +
> + This driver can also be built as a module. If so, the module
> + will be called optoe.
> +
> + If unsure, say N.
> +
> endmenu
> diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
> index 2aab60ef3e3e..00288d669017 100644
> --- a/drivers/misc/eeprom/Makefile
> +++ b/drivers/misc/eeprom/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
> obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o
> obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
> obj-$(CONFIG_EEPROM_IDT_89HPESX) += idt_89hpesx.o
> +obj-$(CONFIG_EEPROM_OPTOE) += optoe.o
> diff --git a/drivers/misc/eeprom/optoe.c b/drivers/misc/eeprom/optoe.c
> new file mode 100644
> index 000000000000..7cdf1a0a5299
> --- /dev/null
> +++ b/drivers/misc/eeprom/optoe.c
> @@ -0,0 +1,1141 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * optoe.c - A driver to read and write the EEPROM on optical transceivers
> + * (SFP, QSFP and similar I2C based devices)
> + *
> + * Copyright (C) 2014 Cumulus networks Inc.
> + * Copyright (C) 2017 Finisar Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Freeoftware Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/*
> + * Description:
> + * a) Optical transceiver EEPROM read/write transactions are just like
> + * the at24 eeproms managed by the at24.c i2c driver
> + * b) The register/memory layout is up to 256 128 byte pages defined by
> + * a "pages valid" register and switched via a "page select"
> + * register as explained in below diagram.
> + * c) 256 bytes are mapped at a time. 'Lower page 00h' is the first 128
> + * bytes of address space, and always references the same
> + * location, independent of the page select register.
> + * All mapped pages are mapped into the upper 128 bytes
> + * (offset 128-255) of the i2c address.
> + * d) Devices with one I2C address (eg QSFP) use I2C address 0x50
> + * (A0h in the spec), and map all pages in the upper 128 bytes
> + * of that address.
> + * e) Devices with two I2C addresses (eg SFP) have 256 bytes of data
> + * at I2C address 0x50, and 256 bytes of data at I2C address
> + * 0x51 (A2h in the spec). Page selection and paged access
> + * only apply to this second I2C address (0x51).
> + * e) The address space is presented, by the driver, as a linear
> + * address space. For devices with one I2C client at address
> + * 0x50 (eg QSFP), offset 0-127 are in the lower
> + * half of address 50/A0h/client[0]. Offset 128-255 are in
> + * page 0, 256-383 are page 1, etc. More generally, offset
> + * 'n' resides in page (n/128)-1. ('page -1' is the lower
> + * half, offset 0-127).
> + * f) For devices with two I2C clients at address 0x50 and 0x51 (eg SFP),
> + * the address space places offset 0-127 in the lower
> + * half of 50/A0/client[0], offset 128-255 in the upper
> + * half. Offset 256-383 is in the lower half of 51/A2/client[1].
> + * Offset 384-511 is in page 0, in the upper half of 51/A2/...
> + * Offset 512-639 is in page 1, in the upper half of 51/A2/...
> + * Offset 'n' is in page (n/128)-3 (for n > 383)
> + *
> + * One I2c addressed (eg QSFP) Memory Map
> + *
> + * 2-Wire Serial Address: 1010000x
> + *
> + * Lower Page 00h (128 bytes)
> + * =====================
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * | |
> + * |Page Select Byte(127)|
> + * =====================
> + * |
> + * |
> + * |
> + * |
> + * V
> + * ------------------------------------------------------------
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * V V V V
> + * ------------ -------------- --------------- --------------
> + * | | | | | | | |
> + * | Upper | | Upper | | Upper | | Upper |
> + * | Page 00h | | Page 01h | | Page 02h | | Page 03h |
> + * | | | (Optional) | | (Optional) | | (Optional |
> + * | | | | | | | for Cable |
> + * | | | | | | | Assemblies) |
> + * | ID | | AST | | User | | |
> + * | Fields | | Table | | EEPROM Data | | |
> + * | | | | | | | |
> + * | | | | | | | |
> + * | | | | | | | |
> + * ------------ -------------- --------------- --------------
> + *
> + * The SFF 8436 (QSFP) spec only defines the 4 pages described above.
> + * In anticipation of future applications and devices, this driver
> + * supports access to the full architected range, 256 pages.
> + *
> + **/
> +
> +/* #define DEBUG 1 */
> +
> +#undef EEPROM_CLASS
> +#ifdef CONFIG_EEPROM_CLASS
> +#define EEPROM_CLASS
> +#endif
> +#ifdef CONFIG_EEPROM_CLASS_MODULE
> +#define EEPROM_CLASS
> +#endif
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/mutex.h>
> +#include <linux/sysfs.h>
> +#include <linux/jiffies.h>
> +#include <linux/i2c.h>
> +
> +#ifdef EEPROM_CLASS
> +#include <linux/eeprom_class.h>
> +#endif
> +
> +#include <linux/types.h>
> +
> +/* The maximum length of a port name */
> +#define MAX_PORT_NAME_LEN 20
> +
> +struct optoe_platform_data {
> + u32 byte_len; /* size (sum of all addr) */
> + u16 page_size; /* for writes */
> + u8 flags;
> + void *dummy1; /* backward compatibility */
> + void *dummy2; /* backward compatibility */
> +
> +#ifdef EEPROM_CLASS
> + struct eeprom_platform_data *eeprom_data;
> +#endif
> + char port_name[MAX_PORT_NAME_LEN];
> +};
> +
> +/* fundamental unit of addressing for EEPROM */
> +#define OPTOE_PAGE_SIZE 128
> +/*
> + * Single address devices (eg QSFP) have 256 pages, plus the unpaged
> + * low 128 bytes. If the device does not support paging, it is
> + * only 2 'pages' long.
> + */
> +#define OPTOE_ARCH_PAGES 256
> +#define ONE_ADDR_EEPROM_SIZE ((1 + OPTOE_ARCH_PAGES) * OPTOE_PAGE_SIZE)
> +#define ONE_ADDR_EEPROM_UNPAGED_SIZE (2 * OPTOE_PAGE_SIZE)
> +/*
> + * Dual address devices (eg SFP) have 256 pages, plus the unpaged
> + * low 128 bytes, plus 256 bytes at 0x50. If the device does not
> + * support paging, it is 4 'pages' long.
> + */
> +#define TWO_ADDR_EEPROM_SIZE ((3 + OPTOE_ARCH_PAGES) * OPTOE_PAGE_SIZE)
> +#define TWO_ADDR_EEPROM_UNPAGED_SIZE (4 * OPTOE_PAGE_SIZE)
> +#define TWO_ADDR_NO_0X51_SIZE (2 * OPTOE_PAGE_SIZE)
> +
> +/* a few constants to find our way around the EEPROM */
> +#define OPTOE_PAGE_SELECT_REG 0x7F
> +#define ONE_ADDR_PAGEABLE_REG 0x02
> +#define ONE_ADDR_NOT_PAGEABLE BIT(2)
> +#define TWO_ADDR_PAGEABLE_REG 0x40
> +#define TWO_ADDR_PAGEABLE BIT(4)
> +#define TWO_ADDR_0X51_REG 92
> +#define TWO_ADDR_0X51_SUPP BIT(6)
> +#define OPTOE_ID_REG 0
> +#define OPTOE_READ_OP 0
> +#define OPTOE_WRITE_OP 1
> +#define OPTOE_EOF 0 /* used for access beyond end of device */
> +
> +struct optoe_data {
> + struct optoe_platform_data chip;
> + int use_smbus;
> + char port_name[MAX_PORT_NAME_LEN];
> +
> + /*
> + * Lock protects against activities from other Linux tasks,
> + * but not from changes by other I2C masters.
> + */
> + struct mutex lock;
> + struct bin_attribute bin;
> + struct attribute_group attr_group;
> +
> + u8 *writebuf;
> + unsigned int write_max;
> +
> + unsigned int num_addresses;
> +
> +#ifdef EEPROM_CLASS
> + struct eeprom_device *eeprom_dev;
> +#endif
> +
> + /* dev_class: ONE_ADDR (QSFP) or TWO_ADDR (SFP) */
> + int dev_class;
> +
> + struct i2c_client *client[2];
> +};
> +
> +/*
> + * This parameter is to help this driver avoid blocking other drivers out
> + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
> + * clock, one 256 byte read takes about 1/43 second which is excessive;
> + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
> + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
> + *
> + * This value is forced to be a power of two so that writes align on pages.
> + */
> +static unsigned int io_limit = OPTOE_PAGE_SIZE;
> +
> +/*
> + * specs often allow 5 msec for a page write, sometimes 20 msec;
> + * it's important to recover from write timeouts.
> + */
> +static unsigned int write_timeout = 25;
> +
> +/*
> + * flags to distinguish one-address (QSFP family) from two-address (SFP family)
> + * If the family is not known, figure it out when the device is accessed
> + */
> +#define ONE_ADDR 1
> +#define TWO_ADDR 2
> +
> +static const struct i2c_device_id optoe_ids[] = {
> + { "optoe1", ONE_ADDR },
> + { "optoe2", TWO_ADDR },
> + { "sff8436", ONE_ADDR },
> + { "24c04", TWO_ADDR },
> + { /* END OF LIST */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, optoe_ids);
> +
> +/*-------------------------------------------------------------------------*/
> +/*
> + * This routine computes the addressing information to be used for
> + * a given r/w request.
> + *
> + * Task is to calculate the client (0 = i2c addr 50, 1 = i2c addr 51),
> + * the page, and the offset.
> + *
> + * Handles both single address (eg QSFP) and two address (eg SFP).
> + * For SFP, offset 0-255 are on client[0], >255 is on client[1]
> + * Offset 256-383 are on the lower half of client[1]
> + * Pages are accessible on the upper half of client[1].
> + * Offset >383 are in 128 byte pages mapped into the upper half
> + *
> + * For QSFP, all offsets are on client[0]
> + * offset 0-127 are on the lower half of client[0] (no paging)
> + * Pages are accessible on the upper half of client[1].
> + * Offset >127 are in 128 byte pages mapped into the upper half
> + *
> + * Callers must not read/write beyond the end of a client or a page
> + * without recomputing the client/page. Hence offset (within page)
> + * plus length must be less than or equal to 128. (Note that this
> + * routine does not have access to the length of the call, hence
> + * cannot do the validity check.)
> + *
> + * Offset within Lower Page 00h and Upper Page 00h are not recomputed
> + */
> +
> +static uint8_t optoe_translate_offset(struct optoe_data *optoe,
> + loff_t *offset,
> + struct i2c_client **client)
> +{
> + unsigned int page = 0;
> +
> + *client = optoe->client[0];
> +
> + /* if SFP style, offset > 255, shift to i2c addr 0x51 */
> + if (optoe->dev_class == TWO_ADDR) {
> + if (*offset > 255) {
> + /* like QSFP, but shifted to client[1] */
> + *client = optoe->client[1];
> + *offset -= 256;
> + }
> + }
> +
> + /*
> + * if offset is in the range 0-128...
> + * page doesn't matter (using lower half), return 0.
> + * offset is already correct (don't add 128 to get to paged area)
> + */
> + if (*offset < OPTOE_PAGE_SIZE)
> + return page;
> +
> + /* note, page will always be positive since *offset >= 128 */
> + page = (*offset >> 7) - 1;
> + /* 0x80 places the offset in the top half, offset is last 7 bits */
> + *offset = OPTOE_PAGE_SIZE + (*offset & 0x7f);
> +
> + return page; /* note also returning client and offset */
> +}
> +
> +static ssize_t optoe_eeprom_read(struct optoe_data *optoe,
> + struct i2c_client *client,
> + char *buf, unsigned int offset, size_t count)
> +{
> + struct i2c_msg msg[2];
> + u8 msgbuf[2];
> + unsigned long timeout, read_time;
> + int status, i;
> +
> + memset(msg, 0, sizeof(msg));
> +
> + switch (optoe->use_smbus) {
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + /*smaller eeproms can work given some SMBus extension calls */
> + if (count > I2C_SMBUS_BLOCK_MAX)
> + count = I2C_SMBUS_BLOCK_MAX;
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + /* Check for odd length transaction */
> + count = (count == 1) ? 1 : 2;
> + break;
> + case I2C_SMBUS_BYTE_DATA:
> + count = 1;
> + break;
> + default:
> + /*
> + * When we have a better choice than SMBus calls, use a
> + * combined I2C message. Write address; then read up to
> + * io_limit data bytes. msgbuf is u8 and will cast to our
> + * needs.
> + */
> + i = 0;
> + msgbuf[i++] = offset;
> +
> + msg[0].addr = client->addr;
> + msg[0].buf = msgbuf;
> + msg[0].len = i;
> +
> + msg[1].addr = client->addr;
> + msg[1].flags = I2C_M_RD;
> + msg[1].buf = buf;
> + msg[1].len = count;
> + }
> +
> + /*
> + * Reads fail if the previous write didn't complete yet. We may
> + * loop a few times until this one succeeds, waiting at least
> + * long enough for one entire page write to work.
> + */
> + timeout = jiffies + msecs_to_jiffies(write_timeout);
> + do {
> + read_time = jiffies;
> +
> + switch (optoe->use_smbus) {
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + status = i2c_smbus_read_i2c_block_data(client, offset,
> + count, buf);
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + status = i2c_smbus_read_word_data(client, offset);
> + if (status >= 0) {
> + buf[0] = status & 0xff;
> + if (count == 2)
> + buf[1] = status >> 8;
> + status = count;
> + }
> + break;
> + case I2C_SMBUS_BYTE_DATA:
> + status = i2c_smbus_read_byte_data(client, offset);
> + if (status >= 0) {
> + buf[0] = status;
> + status = count;
> + }
> + break;
> + default:
> + status = i2c_transfer(client->adapter, msg, 2);
> + if (status == 2)
> + status = count;
> + }
> +
> + dev_dbg(&client->dev, "eeprom read %zu@%d --> %d (%ld)\n",
> + count, offset, status, jiffies);
> +
> + if (status == count) /* happy path */
> + return count;
> +
> + if (status == -ENXIO) /* no module present */
> + return status;
> +
> + /* REVISIT: at HZ=100, this is sloooow */
> + usleep_range(1000, 2000);
> + } while (time_before(read_time, timeout));
> +
> + return -ETIMEDOUT;
> +}
> +
> +static ssize_t optoe_eeprom_write(struct optoe_data *optoe,
> + struct i2c_client *client,
> + const char *buf,
> + unsigned int offset, size_t count)
> +{
> + struct i2c_msg msg;
> + ssize_t status;
> + unsigned long timeout, write_time;
> + unsigned int next_page_start;
> + int i = 0;
> + u16 writeword;
> +
> + /* write max is at most a page
> + * (In this driver, write_max is actually one byte!)
> + */
> + if (count > optoe->write_max)
> + count = optoe->write_max;
> +
> + /* shorten count if necessary to avoid crossing page boundary */
> + next_page_start = roundup(offset + 1, OPTOE_PAGE_SIZE);
> + if (offset + count > next_page_start)
> + count = next_page_start - offset;
> +
> + switch (optoe->use_smbus) {
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + /*smaller eeproms can work given some SMBus extension calls */
> + if (count > I2C_SMBUS_BLOCK_MAX)
> + count = I2C_SMBUS_BLOCK_MAX;
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + /* Check for odd length transaction */
> + count = (count == 1) ? 1 : 2;
> + break;
> + case I2C_SMBUS_BYTE_DATA:
> + count = 1;
> + break;
> + default:
> + /* If we'll use I2C calls for I/O, set up the message */
> + msg.addr = client->addr;
> + msg.flags = 0;
> +
> + /* msg.buf is u8 and casts will mask the values */
> + msg.buf = optoe->writebuf;
> +
> + msg.buf[i++] = offset;
> + memcpy(&msg.buf[i], buf, count);
> + msg.len = i + count;
> + break;
> + }
> +
> + /*
> + * Reads fail if the previous write didn't complete yet. We may
> + * loop a few times until this one succeeds, waiting at least
> + * long enough for one entire page write to work.
> + */
> + timeout = jiffies + msecs_to_jiffies(write_timeout);
> + do {
> + write_time = jiffies;
> +
> + switch (optoe->use_smbus) {
> + case I2C_SMBUS_I2C_BLOCK_DATA:
> + status = i2c_smbus_write_i2c_block_data(client,
> + offset,
> + count,
> + buf);
> + if (status == 0)
> + status = count;
> + break;
> + case I2C_SMBUS_WORD_DATA:
> + if (count == 2) {
> + writeword = (buf[1] << 8) | buf[0];
> + status = i2c_smbus_write_word_data(client,
> + offset,
> + writeword);
> + } else {
> + /* count = 1 */
> + status = i2c_smbus_write_byte_data(client,
> + offset,
> + buf[0]);
> + }
> + if (status == 0)
> + status = count;
> + break;
> + case I2C_SMBUS_BYTE_DATA:
> + status = i2c_smbus_write_byte_data(client, offset,
> + buf[0]);
> + if (status == 0)
> + status = count;
> + break;
> + default:
> + status = i2c_transfer(client->adapter, &msg, 1);
> + if (status == 1)
> + status = count;
> + break;
> + }
> +
> + dev_dbg(&client->dev, "eeprom write %zu@%d --> %ld (%lu)\n",
> + count, offset, (long int)status, jiffies);
> +
> + if (status == count)
> + return count;
> +
> + /* REVISIT: at HZ=100, this is sloooow */
> + usleep_range(1000, 2000);
> + } while (time_before(write_time, timeout));
> +
> + return -ETIMEDOUT;
> +}
> +
> +static ssize_t optoe_eeprom_update_client(struct optoe_data *optoe,
> + char *buf, loff_t off,
> + size_t count, int opcode)
> +{
> + struct i2c_client *client;
> + ssize_t retval = 0;
> + u8 page = 0;
> + loff_t phy_offset = off;
> + int ret = 0;
> +
> + page = optoe_translate_offset(optoe, &phy_offset, &client);
> + dev_dbg(&client->dev,
> + "%s off %lld page:%d phy_offset:%lld, count:%ld, opcode:%d\n",
> + __func__, off, page, phy_offset, (long int)count, opcode);
> + if (page > 0) {
> + ret = optoe_eeprom_write(optoe, client, &page,
> + OPTOE_PAGE_SELECT_REG, 1);
> + if (ret < 0) {
> + dev_dbg(&client->dev,
> + "Write page register for page %d failed ret:%d!\n",
> + page, ret);
> + return ret;
> + }
> + }
> +
> + while (count) {
> + ssize_t status;
> +
> + if (opcode == OPTOE_READ_OP) {
> + status = optoe_eeprom_read(optoe, client, buf,
> + phy_offset, count);
> + } else {
> + status = optoe_eeprom_write(optoe, client, buf,
> + phy_offset, count);
> + }
> + if (status <= 0) {
> + if (retval == 0)
> + retval = status;
> + break;
> + }
> + buf += status;
> + phy_offset += status;
> + count -= status;
> + retval += status;
> + }
> +
> + if (page > 0) {
> + /* return the page register to page 0 (why?) */
> + page = 0;
> + ret = optoe_eeprom_write(optoe, client, &page,
> + OPTOE_PAGE_SELECT_REG, 1);
> + if (ret < 0) {
> + dev_err(&client->dev,
> + "Restore page register to 0 failed:%d!\n", ret);
> + /* error only if nothing has been transferred */
> + if (retval == 0)
> + retval = ret;
> + }
> + }
> + return retval;
> +}
> +
> +/*
> + * Figure out if this access is within the range of supported pages.
> + * Note this is called on every access because we don't know if the
> + * module has been replaced since the last call.
> + * If/when modules support more pages, this is the routine to update
> + * to validate and allow access to additional pages.
> + *
> + * Returns updated len for this access:
> + * - entire access is legal, original len is returned.
> + * - access begins legal but is too long, len is truncated to fit.
> + * - initial offset exceeds supported pages, return OPTOE_EOF (zero)
> + */
> +static ssize_t optoe_page_legal(struct optoe_data *optoe,
> + loff_t off, size_t len)
> +{
> + struct i2c_client *client = optoe->client[0];
> + u8 regval;
> + int status;
> + size_t maxlen;
> +
> + if (off < 0)
> + return -EINVAL;
> + if (optoe->dev_class == TWO_ADDR) {
> + /* SFP case */
> + /* if only using addr 0x50 (first 256 bytes) we're good */
> + if ((off + len) <= TWO_ADDR_NO_0X51_SIZE)
> + return len;
> + /* if offset exceeds possible pages, we're not good */
> + if (off >= TWO_ADDR_EEPROM_SIZE)
> + return OPTOE_EOF;
> + /* in between, are pages supported? */
> + status = optoe_eeprom_read(optoe, client, ®val,
> + TWO_ADDR_PAGEABLE_REG, 1);
> + if (status < 0)
> + return status; /* error out (no module?) */
> + if (regval & TWO_ADDR_PAGEABLE) {
> + /* Pages supported, trim len to the end of pages */
> + maxlen = TWO_ADDR_EEPROM_SIZE - off;
> + } else {
> + /* pages not supported, trim len to unpaged size */
> + if (off >= TWO_ADDR_EEPROM_UNPAGED_SIZE)
> + return OPTOE_EOF;
> +
> + /* will be accessing addr 0x51, is that supported? */
> + /* byte 92, bit 6 implies DDM support, 0x51 support */
> + status = optoe_eeprom_read(optoe, client, ®val,
> + TWO_ADDR_0X51_REG, 1);
> + if (status < 0)
> + return status;
> + if (regval & TWO_ADDR_0X51_SUPP) {
> + /* addr 0x51 is OK */
> + maxlen = TWO_ADDR_EEPROM_UNPAGED_SIZE - off;
> + } else {
> + /* addr 0x51 NOT supported, trim to 256 max */
> + if (off >= TWO_ADDR_NO_0X51_SIZE)
> + return OPTOE_EOF;
> + maxlen = TWO_ADDR_NO_0X51_SIZE - off;
> + }
> + }
> + len = (len > maxlen) ? maxlen : len;
> + dev_dbg(&client->dev,
> + "page_legal, SFP, off %lld len %ld\n",
> + off, (long int)len);
> + } else {
> + /* QSFP case */
> + /* if no pages needed, we're good */
> + if ((off + len) <= ONE_ADDR_EEPROM_UNPAGED_SIZE)
> + return len;
> + /* if offset exceeds possible pages, we're not good */
> + if (off >= ONE_ADDR_EEPROM_SIZE)
> + return OPTOE_EOF;
> + /* in between, are pages supported? */
> + status = optoe_eeprom_read(optoe, client, ®val,
> + ONE_ADDR_PAGEABLE_REG, 1);
> + if (status < 0)
> + return status; /* error out (no module?) */
> + if (regval & ONE_ADDR_NOT_PAGEABLE) {
> + /* pages not supported, trim len to unpaged size */
> + if (off >= ONE_ADDR_EEPROM_UNPAGED_SIZE)
> + return OPTOE_EOF;
> + maxlen = ONE_ADDR_EEPROM_UNPAGED_SIZE - off;
> + } else {
> + /* Pages supported, trim len to the end of pages */
> + maxlen = ONE_ADDR_EEPROM_SIZE - off;
> + }
> + len = (len > maxlen) ? maxlen : len;
> + dev_dbg(&client->dev,
> + "page_legal, QSFP, off %lld len %ld\n",
> + off, (long int)len);
> + }
> + return len;
> +}
> +
> +static ssize_t optoe_read_write(struct optoe_data *optoe,
> + char *buf, loff_t off,
> + size_t len, int opcode)
> +{
> + struct i2c_client *client = optoe->client[0];
> + int chunk;
> + int status = 0;
> + ssize_t retval;
> + size_t pending_len = 0, chunk_len = 0;
> + loff_t chunk_offset = 0, chunk_start_offset = 0;
> +
> + dev_dbg(&client->dev,
> + "%s: off %lld len:%ld, opcode:%s\n",
> + __func__, off, (long int)len,
> + (opcode == OPTOE_READ_OP) ? "r" : "w");
> + if (unlikely(!len))
> + return len;
> +
> + /*
> + * Read data from chip, protecting against concurrent updates
> + * from this host, but not from other I2C masters.
> + */
> + mutex_lock(&optoe->lock);
> +
> + /*
> + * Confirm this access fits within the device supported addr range
> + */
> + status = optoe_page_legal(optoe, off, len);
> + if (status == OPTOE_EOF || status < 0) {
> + mutex_unlock(&optoe->lock);
> + return status;
> + }
> + len = status;
> +
> + /*
> + * For each (128 byte) chunk involved in this request, issue a
> + * separate call to sff_eeprom_update_client(), to
> + * ensure that each access recalculates the client/page
> + * and writes the page register as needed.
> + * Note that chunk to page mapping is confusing, is different for
> + * QSFP and SFP, and never needs to be done. Don't try!
> + */
> + pending_len = len; /* amount remaining to transfer */
> + retval = 0; /* amount transferred */
> + for (chunk = off >> 7; chunk <= (off + len - 1) >> 7; chunk++) {
> + /*
> + * Compute the offset and number of bytes to be read/write
> + *
> + * 1. start at offset 0 (within the chunk), and read/write
> + * the entire chunk
> + * 2. start at offset 0 (within the chunk) and read/write less
> + * than entire chunk
> + * 3. start at an offset not equal to 0 and read/write the rest
> + * of the chunk
> + * 4. start at an offset not equal to 0 and read/write less than
> + * (end of chunk - offset)
> + */
> + chunk_start_offset = chunk * OPTOE_PAGE_SIZE;
> +
> + if (chunk_start_offset < off) {
> + chunk_offset = off;
> + if ((off + pending_len) < (chunk_start_offset +
> + OPTOE_PAGE_SIZE))
> + chunk_len = pending_len;
> + else
> + chunk_len = OPTOE_PAGE_SIZE - off;
> + } else {
> + chunk_offset = chunk_start_offset;
> + if (pending_len > OPTOE_PAGE_SIZE)
> + chunk_len = OPTOE_PAGE_SIZE;
> + else
> + chunk_len = pending_len;
> + }
> +
> + dev_dbg(&client->dev,
> + "sff_r/w: off %lld, len %ld, chunk_start_offset %lld, chunk_offset %lld, chunk_len %ld, pending_len %ld\n",
> + off, (long int)len, chunk_start_offset, chunk_offset,
> + (long int)chunk_len, (long int)pending_len);
> +
> + /*
> + * note: chunk_offset is from the start of the EEPROM,
> + * not the start of the chunk
> + */
> + status = optoe_eeprom_update_client(optoe, buf, chunk_offset,
> + chunk_len, opcode);
> + if (status != chunk_len) {
> + /* This is another 'no device present' path */
> + dev_dbg(&client->dev,
> + "o_u_c: chunk %d c_offset %lld c_len %ld failed %d!\n",
> + chunk, chunk_offset, (long int)chunk_len, status);
> + if (status > 0)
> + retval += status;
> + if (retval == 0)
> + retval = status;
> + break;
> + }
> + buf += status;
> + pending_len -= status;
> + retval += status;
> + }
> + mutex_unlock(&optoe->lock);
> +
> + return retval;
> +}
> +
> +static ssize_t optoe_bin_read(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(container_of(kobj,
> + struct device, kobj));
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> +
> + return optoe_read_write(optoe, buf, off, count, OPTOE_READ_OP);
> +}
> +
> +static ssize_t optoe_bin_write(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *attr,
> + char *buf, loff_t off, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(container_of(kobj,
> + struct device, kobj));
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> +
> + return optoe_read_write(optoe, buf, off, count, OPTOE_WRITE_OP);
> +}
> +
> +static int optoe_remove(struct i2c_client *client)
> +{
> + struct optoe_data *optoe;
> +
> + optoe = i2c_get_clientdata(client);
> + sysfs_remove_group(&client->dev.kobj, &optoe->attr_group);
> + sysfs_remove_bin_file(&client->dev.kobj, &optoe->bin);
> +
> + if (optoe->num_addresses == 2)
> + i2c_unregister_device(optoe->client[1]);
> +
> +#ifdef EEPROM_CLASS
> + eeprom_device_unregister(optoe->eeprom_dev);
> +#endif
> +
> + kfree(optoe->writebuf);
> + kfree(optoe);
> + return 0;
> +}
> +
> +static ssize_t dev_class_show(struct device *dev,
> + struct device_attribute *dattr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> + ssize_t count;
> +
> + mutex_lock(&optoe->lock);
> + count = sprintf(buf, "%d\n", optoe->dev_class);
> + mutex_unlock(&optoe->lock);
> +
> + return count;
> +}
> +
> +static ssize_t dev_class_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> + int dev_class;
> +
> + /*
> + * dev_class is actually the number of i2c addresses used, thus
> + * legal values are "1" (QSFP class) and "2" (SFP class)
> + */
> +
> + if (kstrtoint(buf, 0, &dev_class) != 0 ||
> + dev_class < 1 || dev_class > 2)
> + return -EINVAL;
> +
> + mutex_lock(&optoe->lock);
> + optoe->dev_class = dev_class;
> + mutex_unlock(&optoe->lock);
> +
> + return count;
> +}
> +
> +/*
> + * if using the EEPROM CLASS driver, we don't report a port_name,
> + * the EEPROM CLASS drive handles that. Hence all this code is
> + * only compiled if we are NOT using the EEPROM CLASS driver.
> + */
> +#ifndef EEPROM_CLASS
> +
> +static ssize_t port_name_show(struct device *dev,
> + struct device_attribute *dattr, char *buf)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> + ssize_t count;
> +
> + mutex_lock(&optoe->lock);
> + count = sprintf(buf, "%s\n", optoe->port_name);
> + mutex_unlock(&optoe->lock);
> +
> + return count;
> +}
> +
> +static ssize_t port_name_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct optoe_data *optoe = i2c_get_clientdata(client);
> + char port_name[MAX_PORT_NAME_LEN];
> +
> + /* no checking, this value is not used except by port_name_show */
> +
> + if (sscanf(buf, "%19s", port_name) != 1)
> + return -EINVAL;
> +
> + mutex_lock(&optoe->lock);
> + strcpy(optoe->port_name, port_name);
> + mutex_unlock(&optoe->lock);
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR_RW(port_name);
> +#endif /* if NOT defined EEPROM_CLASS, the common case */
> +
> +static DEVICE_ATTR_RW(dev_class);
> +
> +static struct attribute *optoe_attrs[] = {
> +#ifndef EEPROM_CLASS
> + &dev_attr_port_name.attr,
> +#endif
> + &dev_attr_dev_class.attr,
> + NULL,
> +};
> +
> +static struct attribute_group optoe_attr_group = {
> + .attrs = optoe_attrs,
> +};
> +
> +static int optoe_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int err;
> + int use_smbus = 0;
> + struct optoe_platform_data chip;
> + struct optoe_data *optoe;
> + int num_addresses;
> + char port_name[MAX_PORT_NAME_LEN];
> +
> + if (client->addr != 0x50) {
> + dev_dbg(&client->dev, "probe, bad i2c addr: 0x%x\n",
> + client->addr);
> + err = -EINVAL;
> + goto exit;
> + }
> +
> + if (client->dev.platform_data) {
> + chip = *(struct optoe_platform_data *)client->dev.platform_data;
> + /* take the port name from the supplied platform data */
> +#ifdef EEPROM_CLASS
> + strncpy(port_name, chip.eeprom_data->label, MAX_PORT_NAME_LEN);
> +#else
> + memcpy(port_name, chip.port_name, MAX_PORT_NAME_LEN);
> +#endif
> + dev_dbg(&client->dev,
> + "probe, chip provided, flags:0x%x; name: %s\n",
> + chip.flags, client->name);
> + } else {
> + if (!id->driver_data) {
> + err = -ENODEV;
> + goto exit;
> + }
> + dev_dbg(&client->dev, "probe, building chip\n");
> + strcpy(port_name, "unitialized");
> + chip.flags = 0;
> +#ifdef EEPROM_CLASS
> + chip.eeprom_data = NULL;
> +#endif
> + }
> +
> + /* Use I2C operations unless we're stuck with SMBus extensions. */
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + if (i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> + use_smbus = I2C_SMBUS_I2C_BLOCK_DATA;
> + } else if (i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_WORD_DATA)) {
> + use_smbus = I2C_SMBUS_WORD_DATA;
> + } else if (i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
> + use_smbus = I2C_SMBUS_BYTE_DATA;
> + } else {
> + err = -EPFNOSUPPORT;
> + goto exit;
> + }
> + }
> +
> + optoe = kzalloc(sizeof(*optoe), GFP_KERNEL);
> + if (!optoe) {
> + err = -ENOMEM;
> + goto exit;
> + }
> +
> + mutex_init(&optoe->lock);
> +
> + /* determine whether this is a one-address or two-address module */
> + if ((strcmp(client->name, "optoe1") == 0) ||
> + (strcmp(client->name, "sff8436") == 0)) {
> + /* one-address (eg QSFP) family */
> + optoe->dev_class = ONE_ADDR;
> + chip.byte_len = ONE_ADDR_EEPROM_SIZE;
> + num_addresses = 1;
> + } else if ((strcmp(client->name, "optoe2") == 0) ||
> + (strcmp(client->name, "24c04") == 0)) {
> + /* SFP family */
> + optoe->dev_class = TWO_ADDR;
> + chip.byte_len = TWO_ADDR_EEPROM_SIZE;
> + num_addresses = 2;
> + } else { /* those were the only two choices */
> + err = -EINVAL;
> + goto exit;
> + }
> +
> + dev_dbg(&client->dev, "dev_class: %d\n", optoe->dev_class);
> + optoe->use_smbus = use_smbus;
> + optoe->chip = chip;
> + optoe->num_addresses = num_addresses;
> + memcpy(optoe->port_name, port_name, MAX_PORT_NAME_LEN);
> +
> + /*
> + * Export the EEPROM bytes through sysfs, since that's convenient.
> + * By default, only root should see the data (maybe passwords etc)
> + */
> + sysfs_bin_attr_init(&optoe->bin);
> + optoe->bin.attr.name = "eeprom";
> + optoe->bin.attr.mode = 0444;
> + optoe->bin.read = optoe_bin_read;
> + optoe->bin.size = chip.byte_len;
> +
> + if (!use_smbus ||
> + i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) ||
> + i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA) ||
> + i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
> + /*
> + * NOTE: AN-2079
> + * Finisar recommends that the host implement 1 byte writes
> + * only since this module only supports 32 byte page boundaries.
> + * 2 byte writes are acceptable for PE and Vout changes per
> + * Application Note AN-2071.
> + */
> + unsigned int write_max = 1;
> +
> + optoe->bin.write = optoe_bin_write;
> + optoe->bin.attr.mode |= 0200;
> +
> + if (write_max > io_limit)
> + write_max = io_limit;
> + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
> + write_max = I2C_SMBUS_BLOCK_MAX;
> + optoe->write_max = write_max;
> +
> + /* buffer (data + address at the beginning) */
> + optoe->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
> + if (!optoe->writebuf) {
> + err = -ENOMEM;
> + goto exit_kfree;
> + }
> + } else {
> + dev_warn(&client->dev,
> + "cannot write due to controller restrictions.");
> + }
> +
> + optoe->client[0] = client;
> +
> + /* SFF-8472 spec requires that the second I2C address be 0x51 */
> + if (num_addresses == 2) {
> + optoe->client[1] = i2c_new_dummy(client->adapter, 0x51);
> + if (!optoe->client[1]) {
> + dev_err(&client->dev, "address 0x51 unavailable\n");
> + err = -EADDRINUSE;
> + goto err_struct;
> + }
> + }
> +
> + /* create the sysfs eeprom file */
> + err = sysfs_create_bin_file(&client->dev.kobj, &optoe->bin);
> + if (err)
> + goto err_struct;
> +
> + optoe->attr_group = optoe_attr_group;
> +
> + err = sysfs_create_group(&client->dev.kobj, &optoe->attr_group);
> + if (err) {
> + dev_err(&client->dev, "failed to create sysfs attribute group.\n");
> + goto err_struct;
> + }
> +
> +#ifdef EEPROM_CLASS
> + optoe->eeprom_dev = eeprom_device_register(&client->dev,
> + chip.eeprom_data);
> + if (IS_ERR(optoe->eeprom_dev)) {
> + dev_err(&client->dev, "error registering eeprom device.\n");
> + err = PTR_ERR(optoe->eeprom_dev);
> + goto err_sysfs_cleanup;
> + }
> +#endif
> +
> + i2c_set_clientdata(client, optoe);
> +
> + dev_info(&client->dev, "%zu byte %s EEPROM, %s\n",
> + optoe->bin.size, client->name,
> + optoe->bin.write ? "read/write" : "read-only");
> +
> + if (use_smbus == I2C_SMBUS_WORD_DATA ||
> + use_smbus == I2C_SMBUS_BYTE_DATA) {
> + dev_notice(&client->dev,
> + "Falling back to %s reads, performance will suffer\n",
> + use_smbus == I2C_SMBUS_WORD_DATA ? "word" : "byte");
> + }
> +
> + return 0;
> +
> +#ifdef EEPROM_CLASS
> +err_sysfs_cleanup:
> + sysfs_remove_group(&client->dev.kobj, &optoe->attr_group);
> + sysfs_remove_bin_file(&client->dev.kobj, &optoe->bin);
> +#endif
> +
> +err_struct:
> + if (num_addresses == 2) {
> + if (optoe->client[1])
> + i2c_unregister_device(optoe->client[1]);
> + }
> +
> + kfree(optoe->writebuf);
> +exit_kfree:
> + kfree(optoe);
> +exit:
> + dev_dbg(&client->dev, "probe error %d\n", err);
> +
> + return err;
> +}
> +
> +/*-------------------------------------------------------------------------*/
> +
> +static struct i2c_driver optoe_driver = {
> + .driver = {
> + .name = "optoe",
> + .owner = THIS_MODULE,
> + },
> + .probe = optoe_probe,
> + .remove = optoe_remove,
> + .id_table = optoe_ids,
> +};
> +
> +static int __init optoe_init(void)
> +{
> + if (!io_limit) {
> + pr_err("optoe: io_limit must not be 0!\n");
> + return -EINVAL;
> + }
> +
> + io_limit = rounddown_pow_of_two(io_limit);
> + return i2c_add_driver(&optoe_driver);
> +}
> +module_init(optoe_init);
> +
> +static void __exit optoe_exit(void)
> +{
> + i2c_del_driver(&optoe_driver);
> +}
> +module_exit(optoe_exit);
> +
> +MODULE_DESCRIPTION("Driver for optical transceiver (SFP, QSFP, ...) EEPROMs");
> +MODULE_AUTHOR("DON BOLLINGER <don@...bollingers.org>");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists