linux-kernel - [PATCH v4 6/6] ARM: dts: tegra: enable NAND flash on Colibri T20

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 11 Jun 2018 22:52:24 +0200
From:   Stefan Agner <stefan@...er.ch>
To:     boris.brezillon@...tlin.com, dwmw2@...radead.org,
        computersforpeace@...il.com, marek.vasut@...il.com,
        robh+dt@...nel.org, mark.rutland@....com, thierry.reding@...il.com
Cc:     dev@...xeye.de, miquel.raynal@...tlin.com, richard@....at,
        marcel@...wiler.com, krzk@...nel.org, digetx@...il.com,
        benjamin.lindqvist@...ian.se, jonathanh@...dia.com,
        pdeschrijver@...dia.com, pgaikwad@...dia.com, mirza.krak@...il.com,
        gaireg@...reg.de, linux-mtd@...ts.infradead.org,
        linux-tegra@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Stefan Agner <stefan@...er.ch>
Subject: [PATCH v4 6/6] ARM: dts: tegra: enable NAND flash on Colibri T20

This enables the on-module ONFI conformant NAND flash.

Signed-off-by: Lucas Stach <dev@...xeye.de>
Signed-off-by: Stefan Agner <stefan@...er.ch>
---
 arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 5c202b3e3bb1..0c283fb77214 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -462,6 +462,22 @@
 		};
 	};
 
+	nand-controller@...08000 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nand-bus-width = <8>;
+			nand-on-flash-bbt;
+			nand-ecc-algo = "bch";
+			nand-is-boot-medium;
+			nand-ecc-maximize;
+			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	usb@...04000 {
 		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-- 
2.17.1