lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180612044052.4402-3-rnayak@codeaurora.org>
Date:   Tue, 12 Jun 2018 10:10:47 +0530
From:   Rajendra Nayak <rnayak@...eaurora.org>
To:     viresh.kumar@...aro.org, sboyd@...nel.org, andy.gross@...aro.org,
        ulf.hansson@...aro.org, collinsd@...eaurora.org
Cc:     devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Rajendra Nayak <rnayak@...eaurora.org>
Subject: [PATCH v3 2/7] soc: qcom: rpmpd: Add a Power domain driver to model corners

The Power domains for corners just pass the performance state set by the
consumers to the RPM (Remote Power manager) which then takes care
of setting the appropriate voltage on the corresponding rails to
meet the performance needs.

We add all Power domain data needed on msm8996 here. This driver can easily
be extended by adding data for other qualcomm SoCs as well.

Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
 drivers/soc/qcom/Kconfig               |   9 +
 drivers/soc/qcom/Makefile              |   1 +
 drivers/soc/qcom/rpmpd.c               | 301 +++++++++++++++++++++++++
 include/dt-bindings/power/qcom-rpmpd.h |  16 ++
 4 files changed, 327 insertions(+)
 create mode 100644 drivers/soc/qcom/rpmpd.c
 create mode 100644 include/dt-bindings/power/qcom-rpmpd.h

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 9dc02f390ba3..5c54931a7b99 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -74,6 +74,15 @@ config QCOM_RMTFS_MEM
 
 	  Say y here if you intend to boot the modem remoteproc.
 
+config QCOM_RPMPD
+	tristate "Qualcomm RPM Power domain driver"
+	depends on MFD_QCOM_RPM && QCOM_SMD_RPM
+	help
+	  QCOM RPM Power domain driver to support power-domains with
+	  performance states. The driver communicates a performance state
+	  value to RPM which then translates it into corresponding voltage
+	  for the voltage rail.
+
 config QCOM_SMEM
 	tristate "Qualcomm Shared Memory Manager (SMEM)"
 	depends on ARCH_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 19dcf957cb3a..9550c170de93 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
+obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
new file mode 100644
index 000000000000..c5e7a91f278c
--- /dev/null
+++ b/drivers/soc/qcom/rpmpd.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. */
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_domain.h>
+#include <linux/mfd/qcom_rpm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+#define domain_to_rpmpd(domain) container_of(domain, struct rpmpd, pd)
+
+/* Resource types */
+#define RPMPD_SMPA 0x61706d73
+#define RPMPD_LDOA 0x616f646c
+
+/* Operation Keys */
+#define KEY_CORNER		0x6e726f63 /* corn */
+#define KEY_ENABLE		0x6e657773 /* swen */
+#define KEY_FLOOR_CORNER	0x636676   /* vfc */
+
+#define DEFINE_RPMPD_CORN_SMPA(_platform, _name, _active, r_id)		\
+	static struct rpmpd _platform##_##_active;			\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = {	.name = #_name,	},				\
+		.peer = &_platform##_##_active,				\
+		.res_type = RPMPD_SMPA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	};								\
+	static struct rpmpd _platform##_##_active = {			\
+		.pd = { .name = #_active, },				\
+		.peer = &_platform##_##_name,				\
+		.active_only = true,					\
+		.res_type = RPMPD_SMPA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	}
+
+#define DEFINE_RPMPD_CORN_LDOA(_platform, _name, r_id)			\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = { .name = #_name, },				\
+		.res_type = RPMPD_LDOA,					\
+		.res_id = r_id,						\
+		.key = KEY_CORNER,					\
+	}
+
+#define DEFINE_RPMPD_VFC(_platform, _name, r_id, r_type)		\
+	static struct rpmpd _platform##_##_name = {			\
+		.pd = { .name = #_name, },				\
+		.res_type = r_type,					\
+		.res_id = r_id,						\
+		.key = KEY_FLOOR_CORNER,				\
+	}
+
+#define DEFINE_RPMPD_VFC_SMPA(_platform, _name, r_id)			\
+	DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_SMPA)
+
+#define DEFINE_RPMPD_VFC_LDOA(_platform, _name, r_id)			\
+	DEFINE_RPMPD_VFC(_platform, _name, r_id, RPMPD_LDOA)
+
+struct rpmpd_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+struct rpmpd {
+	struct generic_pm_domain pd;
+	struct rpmpd *peer;
+	const bool active_only;
+	unsigned int corner;
+	bool enabled;
+	const char *res_name;
+	const int res_type;
+	const int res_id;
+	struct qcom_smd_rpm *rpm;
+	__le32 key;
+};
+
+struct rpmpd_desc {
+	struct rpmpd **rpmpds;
+	size_t num_pds;
+};
+
+static DEFINE_MUTEX(rpmpd_lock);
+
+/* msm8996 RPM Power domains */
+DEFINE_RPMPD_CORN_SMPA(msm8996, vddcx, vddcx_ao, 1);
+DEFINE_RPMPD_CORN_SMPA(msm8996, vddmx, vddmx_ao, 2);
+DEFINE_RPMPD_CORN_LDOA(msm8996, vddsscx, 26);
+
+DEFINE_RPMPD_VFC_SMPA(msm8996, vddcx_vfc, 1);
+DEFINE_RPMPD_VFC_LDOA(msm8996, vddsscx_vfc, 26);
+
+static struct rpmpd *msm8996_rpmpds[] = {
+	[MSM8996_VDDCX] =	&msm8996_vddcx,
+	[MSM8996_VDDCX_AO] =	&msm8996_vddcx_ao,
+	[MSM8996_VDDCX_VFC] =	&msm8996_vddcx_vfc,
+	[MSM8996_VDDMX] =	&msm8996_vddmx,
+	[MSM8996_VDDMX_AO] =	&msm8996_vddmx_ao,
+	[MSM8996_VDDSSCX] =	&msm8996_vddsscx,
+	[MSM8996_VDDSSCX_VFC] =	&msm8996_vddsscx_vfc,
+};
+
+static const struct rpmpd_desc msm8996_desc = {
+	.rpmpds = msm8996_rpmpds,
+	.num_pds = ARRAY_SIZE(msm8996_rpmpds),
+};
+
+static const struct of_device_id rpmpd_match_table[] = {
+	{ .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rpmpd_match_table);
+
+static int rpmpd_send_enable(struct rpmpd *pd, bool enable)
+{
+	struct rpmpd_req req = {
+		.key = KEY_ENABLE,
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(enable),
+	};
+
+	return qcom_rpm_smd_write(pd->rpm, QCOM_RPM_ACTIVE_STATE, pd->res_type,
+				  pd->res_id, &req, sizeof(req));
+}
+
+static int rpmpd_send_corner(struct rpmpd *pd, int state, unsigned int corner)
+{
+	struct rpmpd_req req = {
+		.key = pd->key,
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(corner),
+	};
+
+	return qcom_rpm_smd_write(pd->rpm, state, pd->res_type, pd->res_id,
+				  &req, sizeof(req));
+};
+
+static void to_active_sleep(struct rpmpd *pd, unsigned int corner,
+			    unsigned int *active, unsigned int *sleep)
+{
+	*active = corner;
+
+	if (pd->active_only)
+		*sleep = 0;
+	else
+		*sleep = *active;
+}
+
+static int rpmpd_aggregate_corner(struct rpmpd *pd)
+{
+	int ret;
+	struct rpmpd *peer = pd->peer;
+	unsigned int active_corner, sleep_corner;
+	unsigned int this_active_corner = 0, this_sleep_corner = 0;
+	unsigned int peer_active_corner = 0, peer_sleep_corner = 0;
+
+	to_active_sleep(pd, pd->corner, &this_active_corner, &this_sleep_corner);
+
+	if (peer && peer->enabled)
+		to_active_sleep(peer, peer->corner, &peer_active_corner,
+				&peer_sleep_corner);
+
+	active_corner = max(this_active_corner, peer_active_corner);
+
+	ret = rpmpd_send_corner(pd, QCOM_RPM_ACTIVE_STATE, active_corner);
+	if (ret)
+		return ret;
+
+	sleep_corner = max(this_sleep_corner, peer_sleep_corner);
+
+	return rpmpd_send_corner(pd, QCOM_RPM_SLEEP_STATE, sleep_corner);
+}
+
+static int rpmpd_power_on(struct generic_pm_domain *domain)
+{
+	int ret;
+	struct rpmpd *pd = domain_to_rpmpd(domain);
+
+	mutex_lock(&rpmpd_lock);
+
+	ret = rpmpd_send_enable(pd, true);
+	if (ret)
+		goto out;
+
+	pd->enabled = true;
+
+	if (pd->corner)
+		ret = rpmpd_aggregate_corner(pd);
+
+out:
+	mutex_unlock(&rpmpd_lock);
+
+	return ret;
+}
+
+static int rpmpd_power_off(struct generic_pm_domain *domain)
+{
+	int ret;
+	struct rpmpd *pd = domain_to_rpmpd(domain);
+
+	mutex_lock(&rpmpd_lock);
+
+	ret = rpmpd_send_enable(pd, false);
+	if (!ret)
+		pd->enabled = false;
+
+	mutex_unlock(&rpmpd_lock);
+
+	return ret;
+}
+
+static int rpmpd_probe(struct platform_device *pdev)
+{
+	int i;
+	size_t num;
+	struct genpd_onecell_data *data;
+	struct qcom_smd_rpm *rpm;
+	struct rpmpd **rpmpds;
+	const struct rpmpd_desc *desc;
+
+	rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!rpm) {
+		dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
+	rpmpds = desc->rpmpds;
+	num = desc->num_pds;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->domains = devm_kcalloc(&pdev->dev, num, sizeof(*data->domains),
+				     GFP_KERNEL);
+	data->num_domains = num;
+
+	for (i = 0; i < num; i++) {
+		if (!rpmpds[i]) {
+			dev_warn(&pdev->dev, "rpmpds[] with empty entry at index=%d\n",
+				 i);
+			continue;
+		}
+
+		rpmpds[i]->rpm = rpm;
+		rpmpds[i]->pd.power_off = rpmpd_power_off;
+		rpmpds[i]->pd.power_on = rpmpd_power_on;
+		pm_genpd_init(&rpmpds[i]->pd, NULL, true);
+
+		data->domains[i] = &rpmpds[i]->pd;
+	}
+
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, data);
+}
+
+static int rpmpd_remove(struct platform_device *pdev)
+{
+	of_genpd_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static struct platform_driver rpmpd_driver = {
+	.driver = {
+		.name = "qcom-rpmpd",
+		.of_match_table = rpmpd_match_table,
+	},
+	.probe = rpmpd_probe,
+	.remove = rpmpd_remove,
+};
+
+static int __init rpmpd_init(void)
+{
+	return platform_driver_register(&rpmpd_driver);
+}
+core_initcall(rpmpd_init);
+
+static void __exit rpmpd_exit(void)
+{
+	platform_driver_unregister(&rpmpd_driver);
+}
+module_exit(rpmpd_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPM Power Domain Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-rpmpd");
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
new file mode 100644
index 000000000000..59f47317b81f
--- /dev/null
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
+#define _DT_BINDINGS_POWER_QCOM_RPMPD_H
+
+/* MSM8996 Power Domain Indexes */
+#define MSM8996_VDDCX		0
+#define MSM8996_VDDCX_AO	1
+#define MSM8996_VDDCX_VFC	2
+#define MSM8996_VDDMX		3
+#define MSM8996_VDDMX_AO	4
+#define MSM8996_VDDSSCX		5
+#define MSM8996_VDDSSCX_VFC	6
+
+#endif
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ