| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1528801355-18719-2-git-send-email-tdas@codeaurora.org>
Date: Tue, 12 Jun 2018 16:32:34 +0530
From: Taniya Das <tdas@...eaurora.org>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
Stephen Boyd <sboyd@...nel.org>
Cc: Rajendra Nayak <rnayak@...eaurora.org>, devicetree@...r.kernel.org,
robh@...nel.org, skannan@...eaurora.org,
Taniya Das <tdas@...eaurora.org>
Subject: [PATCH v4 1/2] dt-bindings: cpufreq: Introduce QCOM CPUFREQ FW bindings
Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
SoCs. This is required for managing the cpu frequency transitions which are
controlled by firmware.
Signed-off-by: Taniya Das <tdas@...eaurora.org>
---
.../bindings/cpufreq/cpufreq-qcom-fw.txt | 173 +++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
new file mode 100644
index 0000000..e3087ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
@@ -0,0 +1,173 @@
+Qualcomm Technologies, Inc. CPUFREQ Bindings
+
+CPUFREQ FW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+SoCs to manage frequency in hardware. It is capable of controlling frequency
+for multiple clusters.
+
+Properties:
+- compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,cpufreq-fw".
+
+* Property qcom,freq-domain
+Devices supporting freq-domain must set their "qcom,freq-domain" property with
+phandle to a freq_domain_table in their DT node.
+
+* Frequency Domain Table Node
+
+This describes the frequency domain belonging to a device.
+This node can have following properties:
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Addresses and sizes for the memory of the perf
+ , lut and enable bases.
+ perf - indicates the base address for the desired
+ performance state to be set.
+ lut - indicates the look up table base address for the
+ cpufreq driver to read frequencies.
+ enable - indicates the enable register for firmware.
+- reg-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: Address names. Must be "perf", "lut", "enable".
+ Must be specified in the same order as the reg property.
+
+Example:
+
+Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
+DCVS state together.
+
+/ {
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&L2_0>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ L3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+ };
+
+ CPU1: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&L2_100>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_100: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU2: cpu@200 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ next-level-cache = <&L2_200>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_200: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU3: cpu@300 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x300>;
+ enable-method = "psci";
+ next-level-cache = <&L2_300>;
+ qcom,freq-domain = <&freq_domain_table0>;
+ L2_300: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU4: cpu@400 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x400>;
+ enable-method = "psci";
+ next-level-cache = <&L2_400>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_400: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU5: cpu@500 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x500>;
+ enable-method = "psci";
+ next-level-cache = <&L2_500>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_500: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU6: cpu@600 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x600>;
+ enable-method = "psci";
+ next-level-cache = <&L2_600>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_600: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+
+ CPU7: cpu@700 {
+ device_type = "cpu";
+ compatible = "qcom,kryo385";
+ reg = <0x0 0x700>;
+ enable-method = "psci";
+ next-level-cache = <&L2_700>;
+ qcom,freq-domain = <&freq_domain_table1>;
+ L2_700: l2-cache {
+ compatible = "cache";
+ next-level-cache = <&L3_0>;
+ };
+ };
+ };
+
+ qcom,cpufreq-fw {
+ compatible = "qcom,cpufreq-fw";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ freq_domain_table0 : freq_table0 {
+ reg = <0x17d43920 0x4>, <0x17d43110 0x500>,
+ <0x17d41000 0x4>;
+ reg-names = "perf", "lut", "enable";
+ };
+
+ freq_domain_table1 : freq_table1 {
+ reg = <0x17d46120 0x4>, <0x17d45910 0x500>,
+ <0x17d45800 0x4> ;
+ reg-names = "perf", "lut", "enable";
+ };
+ };
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
Powered by blists - more mailing lists