linux-kernel - [PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180612200036.21483-21-jernej.skrabec@siol.net>
Date:   Tue, 12 Jun 2018 22:00:29 +0200
From:   Jernej Skrabec <jernej.skrabec@...l.net>
To:     maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org
Cc:     airlied@...ux.ie, gustavo@...ovan.org,
        maarten.lankhorst@...ux.intel.com, seanpaul@...omium.org,
        mark.rutland@....com, dri-devel@...ts.freedesktop.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver

DW HDMI PHY driver and PHY clock driver share same registers. Make sure
that DW HDMI PHY setup code doesn't change any clock related bits and
set them to 0 during initialization.

Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  |  2 +-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 79154f0f674a..3ba71aff92fc 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -98,7 +98,7 @@
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
 #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
-#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
+#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK	BIT(26)
 #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
 #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
 #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 966688f04741..cd07ceb71601 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi *hdmi,
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
 			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
 
-	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
+	/*
+	 * NOTE: We have to be careful not to overwrite PHY parent
+	 * clock selection bit and clock divider.
+	 */
+	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
+			   (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK,
+			   pll_cfg1_init);
 	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
 			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
 			   pll_cfg2_init);
@@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
 			   SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
 			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
 
+	/* reset PLL clock configuration */
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
+	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0);
+
 	/* set HW control of CEC pins */
 	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);
 
-- 
2.17.1