| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180612200036.21483-27-jernej.skrabec@siol.net>
Date: Tue, 12 Jun 2018 22:00:35 +0200
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org
Cc: airlied@...ux.ie, gustavo@...ovan.org,
maarten.lankhorst@...ux.intel.com, seanpaul@...omium.org,
mark.rutland@....com, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH v2 26/27] ARM: dts: sun8i: r40: Add HDMI pipeline
Add all entries needed for HDMI to function properly.
Since R40 has highly configurable pipeline, both mixers and both TCON
TVs are added. Board specific DT should then connect them together
trough TCON TOP muxers to best fit the purpose of the board.
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 257 +++++++++++++++++++++++++++++++
1 file changed, 257 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 173dcc1652d2..17171c82457e 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -42,8 +42,11 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
/ {
#address-cells = <1>;
@@ -99,12 +102,76 @@
};
};
+ de: display-engine {
+ compatible = "allwinner,sun8i-r40-display-engine",
+ "allwinner,sun8i-h3-display-engine";
+ allwinner,pipelines = <&mixer0>, <&mixer1>;
+ status = "disabled";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ display_clocks: clock@...0000 {
+ compatible = "allwinner,sun8i-r40-de2-clk",
+ "allwinner,sun8i-h3-de2-clk";
+ reg = <0x01000000 0x100000>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mixer0: mixer@...0000 {
+ compatible = "allwinner,sun8i-r40-de2-mixer-0";
+ reg = <0x01100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+ mixer0_out_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ mixer1: mixer@...0000 {
+ compatible = "allwinner,sun8i-r40-de2-mixer-1";
+ reg = <0x01200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_WB>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ reg = <1>;
+ mixer1_out_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+ };
+ };
+ };
+ };
+
nmi_intc: interrupt-controller@...0030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
@@ -451,6 +518,151 @@
#size-cells = <0>;
};
+ tcon_top: tcon-top@...0000 {
+ compatible = "allwinner,sun8i-r40-tcon-top";
+ reg = <0x01c70000 0x1000>;
+ clocks = <&ccu CLK_BUS_TCON_TOP>;
+ clock-names = "bus";
+ resets = <&ccu RST_BUS_TCON_TOP>;
+ reset-names = "rst";
+ #clock-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer0_in: port@0 {
+ reg = <0>;
+
+ tcon_top_mixer0_in_mixer0: endpoint {
+ remote-endpoint = <&mixer0_out_tcon_top>;
+ };
+ };
+
+ tcon_top_mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ };
+
+ tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+ reg = <1>;
+ };
+
+ tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ };
+
+ tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+ reg = <3>;
+ };
+ };
+
+ tcon_top_mixer1_in: port@2 {
+ reg = <2>;
+
+ tcon_top_mixer1_in_mixer1: endpoint {
+ remote-endpoint = <&mixer1_out_tcon_top>;
+ };
+ };
+
+ tcon_top_mixer1_out: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ };
+
+ tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+ reg = <1>;
+ };
+
+ tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ };
+
+ tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+ reg = <3>;
+ };
+ };
+
+ tcon_top_hdmi_in: port@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+ reg = <0>;
+ };
+
+ tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+ reg = <1>;
+ };
+ };
+
+ tcon_top_hdmi_out: port@5 {
+ reg = <5>;
+
+ tcon_top_hdmi_out_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_tcon_top>;
+ };
+ };
+ };
+ };
+
+ tcon_tv0: lcd-controller@...3000 {
+ compatible = "allwinner,sun8i-r40-tcon-tv";
+ reg = <0x01c73000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>, <&ccu CLK_TCON_TV0>,
+ <&tcon_top 1>;
+ clock-names = "ahb", "tcon-ch1", "tcon-top";
+ resets = <&ccu RST_BUS_TCON_TV0>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_tv0_in: port@0 {
+ reg = <0>;
+ };
+
+ tcon_tv0_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ tcon_tv1: lcd-controller@...4000 {
+ compatible = "allwinner,sun8i-r40-tcon-tv";
+ reg = <0x01c74000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_TV1>, <&ccu CLK_TCON_TV1>,
+ <&tcon_top 2>;
+ clock-names = "ahb", "tcon-ch1", "tcon-top";
+ resets = <&ccu RST_BUS_TCON_TV1>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_tv1_in: port@0 {
+ reg = <0>;
+ };
+
+ tcon_tv1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
gic: interrupt-controller@...1000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@@ -461,6 +673,51 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+
+ hdmi: hdmi@...0000 {
+ compatible = "allwinner,sun8i-r40-dw-hdmi",
+ "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@...0000 {
+ compatible = "allwinner,sun8i-r40-hdmi-phy",
+ "allwinner,sun50i-a64-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu 7>, <&ccu 16>;
+ clock-names = "bus", "mod", "pll-0", "pll-1";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
};
timer {
--
2.17.1
Powered by blists - more mailing lists