lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180612200036.21483-20-jernej.skrabec@siol.net>
Date:   Tue, 12 Jun 2018 22:00:28 +0200
From:   Jernej Skrabec <jernej.skrabec@...l.net>
To:     maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org
Cc:     airlied@...ux.ie, gustavo@...ovan.org,
        maarten.lankhorst@...ux.intel.com, seanpaul@...omium.org,
        mark.rutland@....com, dri-devel@...ts.freedesktop.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [PATCH v2 19/27] drm/sun4i: Enable DW HDMI PHY clock

Current DW HDMI PHY code never prepares and enables PHY clock after it is
created. It's just used as it is. This may work in some cases, but it's
clearly wrong. Fix it by adding proper calls to enable/disable PHY
clock.

Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")

Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 5a52fc489a9d..966688f04741 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -477,13 +477,15 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 			dev_err(dev, "Couldn't create the PHY clock\n");
 			goto err_put_clk_pll0;
 		}
+
+		clk_prepare_enable(phy->clk_phy);
 	}
 
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_put_clk_pll0;
+		goto err_disable_clk_phy;
 	}
 
 	ret = reset_control_deassert(phy->rst_phy);
@@ -514,6 +516,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
+err_disable_clk_phy:
+	clk_disable_unprepare(phy->clk_phy);
 err_put_clk_pll0:
 	if (phy->variant->has_phy_clk)
 		clk_put(phy->clk_pll0);
@@ -531,6 +535,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
 
 	clk_disable_unprepare(phy->clk_mod);
 	clk_disable_unprepare(phy->clk_bus);
+	clk_disable_unprepare(phy->clk_phy);
 
 	reset_control_assert(phy->rst_phy);
 
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ