linux-kernel - Re: [PATCH 14/28] drm/mediatek: add connection from RDMA1 to DPI1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1528880011.11190.41.camel@mtksdccf07>
Date:   Wed, 13 Jun 2018 16:53:31 +0800
From:   Stu Hsieh <stu.hsieh@...iatek.com>
To:     CK Hu <ck.hu@...iatek.com>
CC:     Philipp Zabel <p.zabel@...gutronix.de>,
        David Airlie <airlied@...ux.ie>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>, <srv_heupstream@...iatek.com>
Subject: Re: [PATCH 14/28] drm/mediatek: add connection from RDMA1 to DPI1

Hi, CK:

On Wed, 2018-06-13 at 16:27 +0800, CK Hu wrote:
> Hi, Stu:
> 
> On Wed, 2018-06-13 at 15:56 +0800, Stu Hsieh wrote:
> > Hi, CK:
> > 
> > On Wed, 2018-06-13 at 14:13 +0800, CK Hu wrote:
> > > Hi, Stu:
> > > 
> > > On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
> > > > This patch add the connection from RDMA1 to DPI1
> > > > 
> > > > Signed-off-by: Stu Hsieh <stu.hsieh@...iatek.com>
> > > > ---
> > > >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++
> > > >  1 file changed, 8 insertions(+)
> > > > 
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > index fed1b5704355..4abd5dabeccf 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > > > @@ -85,7 +85,9 @@
> > > >  #define RDMA0_MOUT_DSI2			0x4
> > > >  #define RDMA0_MOUT_DSI3			0x5
> > > >  #define RDMA1_MOUT_DPI0			0x2
> > > > +#define RDMA1_MOUT_DPI1			0x3
> > > 
> > > Usually, each bit of a mout register represent a output enable. Is this
> > > value 0x3 a correct value?
> > > 
> > > Regards,
> > > CK
> > > 
> > In HW CONFIG SPEC show as following
> > 
> > Bit(s)	Name			Description
> > 2:0	DISP_PATH1_SOUT_SEL_IN	0 : Output to DSI0
> > 				1:  Ooutput to DSI1
> > 				2:  Ooutput to DPI
> > 				3:  Ooutput to DPI1
> > 				4:  Ooutput to DSI2
> > 				5:  Ooutput to DSI3
> > 				6 : reserved
> > 				7:  Ooutput to DISP_UFOE
> > 
> > So, 0x3 is correct value
> 
> It looks like that RDMA1 output is also SOUT, use the naming SOUT would
> be better. 
> 
> Regards,
> CK
> 
OK, I would change the definition name from
DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN to DISP_REG_CONFIG_DISP_RDMA1_SOUT_EN

Regard,
STu

> > 
> > Regard,
> > Stu
> > 
> > 
> > > >  #define DPI0_SEL_IN_RDMA1		0x1
> > > > +#define DPI1_SEL_IN_RDMA1		(0x1 << 8)
> > > >  #define COLOR1_SEL_IN_OVL1		0x1
> > > >  
> > > >  #define OVL_MOUT_EN_RDMA		0x1
> > > > @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
> > > >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > > >  		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > >  		value = RDMA1_MOUT_DPI0;
> > > > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > > +		*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;
> > > > +		value = RDMA1_MOUT_DPI1;
> > > >  	} else {
> > > >  		value = 0;
> > > >  	}
> > > > @@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> > > >  	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) {
> > > >  		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > >  		value = DPI0_SEL_IN_RDMA1;
> > > > +	} else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
> > > > +		*addr = DISP_REG_CONFIG_DPI_SEL_IN;
> > > > +		value = DPI1_SEL_IN_RDMA1;
> > > >  	} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
> > > >  		*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
> > > >  		value = COLOR1_SEL_IN_OVL1;
> > > 
> > > 
> > 
> > 
> 
>