lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <521dd38a-29b8-5670-4296-84b300921b3d@arm.com>
Date:   Wed, 13 Jun 2018 18:34:45 +0100
From:   Valentin Schneider <valentin.schneider@....com>
To:     Ryan Grachek <ryan@...ted.us>
Cc:     Wei Xu <xuwei5@...ilicon.com>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, John Stultz <john.stultz@...aro.org>
Subject: Re: [PATCH] arm64: dts: hikey: Define wl1835 power capabilities

Hi,

On 13/06/18 16:13, Ryan Grachek wrote:
> These properties are required for compatibility with runtime PM.
> Without these properties, MMC host controller will not be aware
> of power capabilities. When the wlcore driver attempts to power
> on the device, it will erroneously fail with -EACCES.
> 

I don't have a hikey620 to test this, but the hikey960 is suffering from the
same issue (see [1]). I added these properties to the dwmmc2 node of the
hikey960 (see snippet) and wlan0 does show up. Would you mind sending a
similar patch for that board ?

Thanks !

Valentin

[1]: https://lkml.org/lkml/2018/6/12/930

--->8

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 85aadf1b..c706f70 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -613,6 +613,8 @@
        vmmc-supply = <&wlan_en>;
        ti,non-removable;
        non-removable;
+       cap-power-off-card;
+       keep-power-in-suspend;
        #address-cells = <0x1>;
        #size-cells = <0x0>;
        status = "ok";

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ