[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFp+6iEnep3ogEkdfmaSOn_2w+09huae2NOwBF1o7-vn3iQMCA@mail.gmail.com>
Date: Thu, 14 Jun 2018 12:18:47 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: Amit Kucheria <amit.kucheria@...aro.org>
Cc: open list <linux-kernel@...r.kernel.org>,
Rajendra Nayak <rnayak@...eaurora.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
edubezval@...il.com, Zhang Rui <rui.zhang@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"open list:THERMAL" <linux-pm@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 4/5] thermal: tsens: Add support for SDM845
Hi Amit,
On Tue, Jun 12, 2018 at 4:24 PM, Amit Kucheria <amit.kucheria@...aro.org> wrote:
> SDM845 uses the TSENS v2 IP block
>
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
> Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 1 +
> drivers/thermal/qcom/Makefile | 2 +-
> drivers/thermal/qcom/tsens-sdm845.c | 15 +++++++++++++++
> drivers/thermal/qcom/tsens.c | 3 +++
> drivers/thermal/qcom/tsens.h | 5 ++++-
> 5 files changed, 24 insertions(+), 2 deletions(-)
> create mode 100644 drivers/thermal/qcom/tsens-sdm845.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 292ed89..8652499 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -5,6 +5,7 @@ Required properties:
> - "qcom,msm8916-tsens" : For 8916 Family of SoCs
> - "qcom,msm8974-tsens" : For 8974 Family of SoCs
> - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> + - "qcom,sdm845-tsens" : For SDM845 Family of SoCs
>
> - reg: Address range of the thermal registers
> - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 2cc2193..dc9f169 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
> obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
> -qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o tsens-sdm845.o
> diff --git a/drivers/thermal/qcom/tsens-sdm845.c b/drivers/thermal/qcom/tsens-sdm845.c
> new file mode 100644
> index 0000000..a647265
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-sdm845.c
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, Linaro Limited
> + */
> +
> +#include "tsens.h"
> +
> +static const struct tsens_ops ops_sdm845 = {
> + .init = init_common,
> + .get_temp = get_temp_tsens_v2,
> +};
> +
> +const struct tsens_data data_sdm845 = {
Just a minor nit. 'static' here?
> + .ops = &ops_sdm845,
> +};
[snip]
Thanks & Regards
Vivek
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists