[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1528960095.git.sean.wang@mediatek.com>
Date: Thu, 14 Jun 2018 15:14:22 +0800
From: <sean.wang@...iatek.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<marcel@...tmann.org>, <johan.hedberg@...il.com>
CC: <devicetree@...r.kernel.org>, <linux-bluetooth@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Sean Wang <sean.wang@...iatek.com>
Subject: [PATCH v3 0/7] add support for Bluetooth on MT7622 SoC
From: Sean Wang <sean.wang@...iatek.com>
v3 and changes since v2
* all changes happen on patch 6
- fix up SPDX license style for btmtkuart.h.
- change firmware download from in ACL data to in HCI commands
and then remove unused mtk_acl_wmt_sync and related code.
- add a workaround replacing bad vendor event id 0xe4 with 0xff every
vendor should use.
- add a sanity check for mtk_hci_wmt_sync to verifying if
input parameters are valid.
- add an atomic_inc(&bdev->hdev->cmd_cnt) for __hci_cmd_sync_ev.
- be changed to use firmware with a header called mt7622pr2h.bin.
v2 and changes since v1
- Dropped patches already being applied
- Rewirte the whole driver using btuart [1], and add slight extension
of btuart to fit into btmtkuart driver. Beware that [1] is also pulled
into one part of the series for avoiding any breakage when the patchset
is being compiled.
[1] btuart
https://www.spinics.net/lists/linux-bluetooth/msg74918.html
v1:
Hi,
This patchset introduces built-in Bluetooth support on MT7622 SoC.
And, it should be simple to make an extension to support other
MediaTek SoCs with adjusting a few of changes on the initialization
sequence of the device.
Before the main driver is being introduced, a few of things about
power-domain management should be re-worked for serdev core and MediaTek
SCPSYS to allow the Bluetooth to properly power up.
Patch 2: add a generic way attaching power domain to serdev
Patch 3 and 4: add cleanups with reuse APIs from Linux core
Patch 5: fix a limitation about power enablement Bluetooth depends on
Patch 1, 6 and 7: the major part of adding Bluetooth support to MT7622
Sean
Marcel Holtmann (1):
Bluetooth: Add new serdev based driver for UART attached controllers
Sean Wang (6):
dt-bindings: net: bluetooth: Add mediatek-bluetooth
serdev: add dev_pm_domain_attach|detach()
Bluetooth: Add new quirk for non-persistent setup settings
Bluetooth: Extend btuart driver for join more vendor devices
Bluetooth: mediatek: Add protocol support for MediaTek serial devices
MAINTAINERS: add an entry for MediaTek Bluetooth driver
.../devicetree/bindings/net/mediatek-bluetooth.txt | 35 ++
MAINTAINERS | 8 +
drivers/bluetooth/Kconfig | 23 +
drivers/bluetooth/Makefile | 3 +
drivers/bluetooth/btmtkuart.c | 355 ++++++++++++++
drivers/bluetooth/btmtkuart.h | 119 +++++
drivers/bluetooth/btuart.c | 527 +++++++++++++++++++++
drivers/bluetooth/btuart.h | 30 ++
drivers/tty/serdev/core.c | 14 +-
include/net/bluetooth/hci.h | 9 +
net/bluetooth/hci_core.c | 3 +-
11 files changed, 1124 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
create mode 100644 drivers/bluetooth/btmtkuart.c
create mode 100644 drivers/bluetooth/btmtkuart.h
create mode 100644 drivers/bluetooth/btuart.c
create mode 100644 drivers/bluetooth/btuart.h
--
2.7.4
Powered by blists - more mailing lists