[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6557713.S7AzxIg9TS@blindfold>
Date: Thu, 14 Jun 2018 09:25:19 +0200
From: Richard Weinberger <richard@...ma-star.at>
To: Masahiro Yamada <yamada.masahiro@...ionext.com>
Cc: linux-mtd@...ts.infradead.org,
Boris Brezillon <boris.brezillon@...tlin.com>,
Philipp Rosenberger <p.rosenberger@...utronix.de>,
Rob Herring <robh@...nel.org>, devicetree@...r.kernel.org,
Miquel Raynal <miquel.raynal@...tlin.com>,
linux-kernel@...r.kernel.org, Marek Vasut <marek.vasut@...il.com>,
Brian Norris <computersforpeace@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v2 0/3] mtd: rawnand: denali: add new clocks and improve setup_data_interface
Masahiro,
Am Donnerstag, 14. Juni 2018, 07:11:04 CEST schrieb Masahiro Yamada:
>
> The ->setup_data_interface() hook needs to know the clock frequency.
> In fact, this IP needs three clocks, bus "which clock?" is really
> confusing. (It is not described in the DT-binding at all.)
>
> This series adds more clocks. In the new binding, three clocks
> are required: core clock, bus interface clock, ECC engine clock.
>
> This series also takes care of the backward compatibility by
> providing hardcoded values in case the new clocks are missing.
> So, existing DT should work.
>
>
> Changes in v2:
> - Split patches into sensible chunks
>
> Masahiro Yamada (3):
> mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
> mtd: rawnand: denali_dt: add more clocks based on IP datasheet
> mtd: rawnand: denali: optimize timing parameters for data interface
This still means that we need to feed at least 2/3 and 3/3 into -stable to
unbreak the driver.
I'd really prefer a single self-hosting fix that can go into -stable and then
patches on top of the fix can prettify the driver.
Thanks,
//richard
--
sigma star gmbh - Eduard-Bodem-Gasse 6 - 6020 Innsbruck - Austria
ATU66964118 - FN 374287y
Powered by blists - more mailing lists