linux-kernel - [PATCH v2 net-next 5/6] net: ethernet: ti: cpsw: restore shaper configuration while down/up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180614073650.29659-6-ivan.khoronzhuk@linaro.org>
Date:   Thu, 14 Jun 2018 10:36:49 +0300
From:   Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
To:     grygorii.strashko@...com, davem@...emloft.net
Cc:     corbet@....net, akpm@...ux-foundation.org, netdev@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, vinicius.gomes@...el.com,
        henrik@...tad.us, jesus.sanchez-palencia@...el.com,
        ilias.apalodimas@...aro.org, p-varis@...com, spatton@...com,
        francois.ozog@...aro.org, yogeshs@...com, nsekhar@...com,
        andrew@...n.ch, Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
Subject: [PATCH v2 net-next 5/6] net: ethernet: ti: cpsw: restore shaper configuration while down/up

Need to restore shapers configuration after interface was down/up.
This is needed as appropriate configuration is still replicated in
kernel settings. This only shapers context restore, so vlan
configuration should be restored by user if needed, especially for
devices with one port where vlan frames are sent via ALE.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
---
 drivers/net/ethernet/ti/cpsw.c | 47 ++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 3623c2994ddf..b2dfa7053b40 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1807,6 +1807,51 @@ static int cpsw_set_cbs(struct net_device *ndev,
 	return ret;
 }
 
+static void cpsw_cbs_resume(struct cpsw_slave *slave, struct cpsw_priv *priv)
+{
+	int fifo, bw;
+
+	for (fifo = CPSW_FIFO_SHAPERS_NUM; fifo > 0; fifo--) {
+		bw = priv->fifo_bw[fifo];
+		if (!bw)
+			continue;
+
+		cpsw_set_fifo_rlimit(priv, fifo, bw);
+	}
+}
+
+static void cpsw_mqprio_resume(struct cpsw_slave *slave, struct cpsw_priv *priv)
+{
+	struct cpsw_common *cpsw = priv->cpsw;
+	u32 tx_prio_map = 0;
+	int i, tc, fifo;
+	u32 tx_prio_rg;
+
+	if (!priv->mqprio_hw)
+		return;
+
+	for (i = 0; i < 8; i++) {
+		tc = netdev_get_prio_tc_map(priv->ndev, i);
+		fifo = CPSW_FIFO_SHAPERS_NUM - tc;
+		tx_prio_map |= fifo << (4 * i);
+	}
+
+	tx_prio_rg = cpsw->version == CPSW_VERSION_1 ?
+		     CPSW1_TX_PRI_MAP : CPSW2_TX_PRI_MAP;
+
+	slave_write(slave, tx_prio_map, tx_prio_rg);
+}
+
+/* restore resources after port reset */
+static void cpsw_restore(struct cpsw_priv *priv)
+{
+	/* restore MQPRIO offload */
+	for_each_slave(priv, cpsw_mqprio_resume, priv);
+
+	/* restore CBS offload */
+	for_each_slave(priv, cpsw_cbs_resume, priv);
+}
+
 static int cpsw_ndo_open(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
@@ -1886,6 +1931,8 @@ static int cpsw_ndo_open(struct net_device *ndev)
 
 	}
 
+	cpsw_restore(priv);
+
 	/* Enable Interrupt pacing if configured */
 	if (cpsw->coal_intvl != 0) {
 		struct ethtool_coalesce coal;
-- 
2.17.1