[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180614100339.02f1ee04@bbrezillon>
Date: Thu, 14 Jun 2018 10:03:39 +0200
From: Boris Brezillon <boris.brezillon@...tlin.com>
To: Richard Weinberger <richard@...ma-star.at>
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
linux-mtd <linux-mtd@...ts.infradead.org>,
Philipp Rosenberger <p.rosenberger@...utronix.de>,
Rob Herring <robh@...nel.org>,
DTML <devicetree@...r.kernel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Marek Vasut <marek.vasut@...il.com>,
Brian Norris <computersforpeace@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v2 0/3] mtd: rawnand: denali: add new clocks and improve
setup_data_interface
On Thu, 14 Jun 2018 10:02:12 +0200
Richard Weinberger <richard@...ma-star.at> wrote:
> Am Donnerstag, 14. Juni 2018, 09:38:35 CEST schrieb Boris Brezillon:
> > On Thu, 14 Jun 2018 16:29:59 +0900
> > Masahiro Yamada <yamada.masahiro@...ionext.com> wrote:
> >
> > > Hi Richard,
> > >
> > > 2018-06-14 16:25 GMT+09:00 Richard Weinberger <richard@...ma-star.at>:
> > > > Masahiro,
> > > >
> > > > Am Donnerstag, 14. Juni 2018, 07:11:04 CEST schrieb Masahiro Yamada:
> > > >>
> > > >> The ->setup_data_interface() hook needs to know the clock frequency.
> > > >> In fact, this IP needs three clocks, bus "which clock?" is really
> > > >> confusing. (It is not described in the DT-binding at all.)
> > > >>
> > > >> This series adds more clocks. In the new binding, three clocks
> > > >> are required: core clock, bus interface clock, ECC engine clock.
> > > >>
> > > >> This series also takes care of the backward compatibility by
> > > >> providing hardcoded values in case the new clocks are missing.
> > > >> So, existing DT should work.
> > > >>
> > > >>
> > > >> Changes in v2:
> > > >> - Split patches into sensible chunks
> > > >>
> > > >> Masahiro Yamada (3):
> > > >> mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
> > > >> mtd: rawnand: denali_dt: add more clocks based on IP datasheet
> > > >> mtd: rawnand: denali: optimize timing parameters for data interface
> > > >
> > > > This still means that we need to feed at least 2/3 and 3/3 into -stable to
> > > > unbreak the driver.
> > >
> > >
> > > 3/3 is not mandatory.
> > >
> > > You can only back-port 1/3 and 2/3.
> >
> > Well, patch 1 is not a fix, can we move it after patch 2 so that only
> > patch 2 is flagged with the Fixes+Cc-stable tags?
>
> Another question, shall we fix arch/arm/boot/dts/socfpga.dtsi too?
Yep.
Powered by blists - more mailing lists