[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <e451a4dc1c885921c66da63549a720805c287a6a.1528972165.git.amit.kucheria@linaro.org>
Date: Thu, 14 Jun 2018 13:43:12 +0300
From: Amit Kucheria <amit.kucheria@...aro.org>
To: linux-kernel@...r.kernel.org
Cc: rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
bjorn.andersson@...aro.org, edubezval@...il.com,
smohanad@...eaurora.org, vivek.gautam@...eaurora.org,
andy.gross@...aro.org, David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
linux-soc@...r.kernel.org (open list:ARM/QUALCOMM SUPPORT),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM64 PORT
(AARCH64 ARCHITECTURE))
Subject: [PATCH v3 2/6] dt: qcom: 8996: thermal: Move to DT initialisation
We also split up the regmap address space into two, one for the TM
registers, the other for the SROT registers. This was required to deal with
different address offsets for the TM and SROT registers across different
SoC families.
Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT). This is OK since the code
doesn't really use the SROT functionality yet.
Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c7f9ca..6c8a857 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -461,7 +461,17 @@
tsens0: thermal-sensor@...000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a8000 0x2000>;
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...000 {
+ compatible = "qcom,msm8996-tsens";
+ reg = <0x4ad000 0x1000>, /* TM */
+ <0x4ac000 0x1000>; /* SROT */
+ #qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
};
--
2.7.4
Powered by blists - more mailing lists