linux-kernel - Re: [linux-sunxi] Re: [PATCH] crypto: sun4i-ss: prevent deadlock on emulated hardware

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20180615110835.ctawebyouaqt7dki@flea>
Date:   Fri, 15 Jun 2018 13:08:35 +0200
From:   Maxime Ripard <maxime.ripard@...tlin.com>
To:     Corentin Labbe <clabbe.montjoie@...il.com>
Cc:     davem@...emloft.net, herbert@...dor.apana.org.au, wens@...e.org,
        linux-arm-kernel@...ts.infradead.org, linux-crypto@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [linux-sunxi] Re: [PATCH] crypto: sun4i-ss: prevent deadlock on
 emulated hardware

On Fri, Jun 15, 2018 at 11:16:50AM +0200, Corentin Labbe wrote:
> On Fri, Jun 15, 2018 at 11:04:12AM +0200, Maxime Ripard wrote:
> > On Fri, Jun 15, 2018 at 10:15:54AM +0200, Corentin Labbe wrote:
> > > On Fri, Jun 15, 2018 at 09:57:54AM +0200, Maxime Ripard wrote:
> > > > On Thu, Jun 14, 2018 at 09:36:59PM +0200, Corentin Labbe wrote:
> > > > > Running a qemu emulated cubieboard with sun4i-ss driver enabled led to a never
> > > > > ending boot.
> > > > > This is due to sun4i-ss deadlocked and taking all cpu in an infinite loop.
> > > > > Since the crypto hardware is not implemented, all registers are read as 0.
> > > > > So sun4i-ss will never progress in any operations. (TX_CNT being always 0)
> > > > > 
> > > > > The first idea is to add a "TX_CNT always zero timeout" but this made cipher/hash loops
> > > > > more complex and prevent a case that never happen on real hardware.
> > > > > 
> > > > > The best way to fix is to check at probe time if we run on a virtual
> > > > > machine with hardware emulated but non-implemented and prevent
> > > > > sun4i-ss to be loaded in that case.
> > > > > Letting sun4i-ss to load is useless anyway since all crypto algorithm will be
> > > > > disabled since they will fail crypto selftests.
> > > > > 
> > > > > Tested-on: qemu-cubieboard
> > > > > Tested-on: cubieboard2
> > > > > 
> > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
> > > > > ---
> > > > >  drivers/crypto/sunxi-ss/sun4i-ss-core.c | 10 ++++++++++
> > > > >  1 file changed, 10 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-core.c b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > > > > index a81d89b3b7d8..a178e80adcf3 100644
> > > > > --- a/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > > > > +++ b/drivers/crypto/sunxi-ss/sun4i-ss-core.c
> > > > > @@ -341,9 +341,18 @@ static int sun4i_ss_probe(struct platform_device *pdev)
> > > > >  	 * I expect to be a sort of Security System Revision number.
> > > > >  	 * Since the A80 seems to have an other version of SS
> > > > >  	 * this info could be useful
> > > > > +	 * Detect virtual machine with non-implemented hardware
> > > > > +	 * (qemu-cubieboard) by checking the register value after a write to it.
> > > > > +	 * On non-implemented hardware, all registers are read as 0.
> > > > > +	 * On real hardware we should have a value > 0.
> > > > >  	 */
> > > > >  	writel(SS_ENABLED, ss->base + SS_CTL);
> > > > >  	v = readl(ss->base + SS_CTL);
> > > > > +	if (!v) {
> > > > > +		dev_err(&pdev->dev, "Qemu with non-implemented SS detected.\n");
> > > > > +		err = -ENODEV;
> > > > > +		goto error_rst;
> > > > > +	}
> > > > 
> > > > This is wrong way to tackle the issue. There's multiple reason why
> > > > this could happen (for example the device not being clocked, or
> > > > maintained in reset). There's nothing specific about qemu here, and
> > > > the fundamental issue isn't that the device isn't functional in qemu,
> > > > it's that qemu lies about which hardware it can emulate in the DT it
> > > > passes to the kernel.
> > > > 
> > > > There's no way this can scale, alone from the fact that qemu should
> > > > patch the DT according to what it can do. Not trying to chase after
> > > > each and every device that is broken in qemu.
> > > > 
> > > > NAK.
> > > > 
> > > 
> > > My fix detect also when the device is badly clocked.
> > 
> > In which case, the proper fix is to enable the clock, not throw the
> > kernel's arm up in the air.
> > 
> 
> By badly I mean "not clocked" or "with the wrong frequencies".
>
> I could change the clock rate range test to exit (it issue only a
> warning for now).  But I think this fix detect all cases and still
> permit someone to play with overclocking/downclocking.

You're still trying to fix the consequence when you should be fixing
the cause.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com