linux-kernel - Re: [linux-sunxi] [PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8789732.RJMkczUIGD@jernej-laptop>
Date:   Fri, 15 Jun 2018 18:44:33 +0200
From:   Jernej Škrabec <jernej.skrabec@...il.com>
To:     linux-sunxi@...glegroups.com
Cc:     maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org,
        airlied@...ux.ie, gustavo@...ovan.org,
        maarten.lankhorst@...ux.intel.com, seanpaul@...omium.org,
        mark.rutland@....com, dri-devel@...ts.freedesktop.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [linux-sunxi] [PATCH v2 20/27] drm/sun4i: Don't change clock bits in DW HDMI PHY driver

Dne torek, 12. junij 2018 ob 22:00:29 CEST je Jernej Skrabec napisal(a):
> DW HDMI PHY driver and PHY clock driver share same registers. Make sure
> that DW HDMI PHY setup code doesn't change any clock related bits and
> set them to 0 during initialization.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
> ---
>  drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h  |  2 +-
>  drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 12 +++++++++++-
>  2 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h index 79154f0f674a..3ba71aff92fc
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
> @@ -98,7 +98,7 @@
>  #define SUN8I_HDMI_PHY_PLL_CFG1_LDO2_EN		BIT(29)
>  #define SUN8I_HDMI_PHY_PLL_CFG1_LDO1_EN		BIT(28)
>  #define SUN8I_HDMI_PHY_PLL_CFG1_HV_IS_33	BIT(27)
> -#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL	BIT(26)
> +#define SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK	BIT(26)
>  #define SUN8I_HDMI_PHY_PLL_CFG1_PLLEN		BIT(25)
>  #define SUN8I_HDMI_PHY_PLL_CFG1_LDO_VSET(x)	((x) << 22)
>  #define SUN8I_HDMI_PHY_PLL_CFG1_UNKNOWN(x)	((x) << 20)
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 966688f04741..cd07ceb71601
> 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -183,7 +183,13 @@ static int sun8i_hdmi_phy_config_h3(struct dw_hdmi
> *hdmi, regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_ANA_CFG1_REG,
>  			   SUN8I_HDMI_PHY_ANA_CFG1_TXEN_MASK, 0);
> 
> -	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, pll_cfg1_init);
> +	/*
> +	 * NOTE: We have to be careful not to overwrite PHY parent
> +	 * clock selection bit and clock divider.
> +	 */
> +	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG,
> +			   (u32)~SUN8I_HDMI_PHY_PLL_CFG1_CKIN_SEL_MSK,
> +			   pll_cfg1_init);
>  	regmap_update_bits(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG,
>  			   (u32)~SUN8I_HDMI_PHY_PLL_CFG2_PREDIV_MSK,
>  			   pll_cfg2_init);
> @@ -352,6 +358,10 @@ static void sun8i_hdmi_phy_init_h3(struct
> sun8i_hdmi_phy *phy) SUN8I_HDMI_PHY_ANA_CFG3_SCLEN |
>  			   SUN8I_HDMI_PHY_ANA_CFG3_SDAEN);
> 
> +	/* reset PLL clock configuration */
> +	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG1_REG, 0);
> +	regmap_write(phy->regs, SUN8I_HDMI_PHY_PLL_CFG2_REG, 0);
> +

For some reason, this change breaks HDMI on H3. Clearing only PLL parent 
selection bit works ok, though. I'll fix it in next revision.

Best regards,
Jernej

>  	/* set HW control of CEC pins */
>  	regmap_write(phy->regs, SUN8I_HDMI_PHY_CEC_REG, 0);