linux-kernel - [PATCH v3 1/4] dt-bindings: add bindings for px30 clock controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 15 Jun 2018 10:16:48 +0800
From:   Elaine Zhang <zhangqing@...k-chips.com>
To:     heiko@...ech.de
Cc:     sboyd@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
        mturquette@...libre.com, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
        cl@...k-chips.com, xxx@...k-chips.com, xf@...k-chips.com,
        huangtao@...k-chips.com, Elaine Zhang <zhangqing@...k-chips.com>
Subject: [PATCH v3 1/4] dt-bindings: add bindings for px30 clock controller

Add devicetree bindings for Rockchip cru which found on
Rockchip SoCs.

Signed-off-by: Elaine Zhang <zhangqing@...k-chips.com>
---
 .../bindings/clock/rockchip,px30-cru.txt           | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt

diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
new file mode 100644
index 000000000000..1077692d6489
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
@@ -0,0 +1,66 @@
+* Rockchip PX30 Clock and Reset Unit
+
+The PX30 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
+- compatible: CRU should be "rockchip,px30-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "i2sx_clkin" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+	pmucru: clock-controller@...bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@...b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@...30000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
-- 
1.9.1