[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180618103908.17a04679@bbrezillon>
Date: Mon, 18 Jun 2018 10:39:08 +0200
From: Boris Brezillon <boris.brezillon@...tlin.com>
To: Peter Rosin <peda@...ntia.se>
Cc: linux-kernel@...r.kernel.org,
Wenyou Yang <wenyou.yang@...rochip.com>,
Josh Wu <rainyfeeling@...look.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
linux-mtd@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] mtd: nand: raw: atmel: add module param to avoid using
dma
On Thu, 29 Mar 2018 15:10:54 +0200
Peter Rosin <peda@...ntia.se> wrote:
> On a sama5d31 with a Full-HD dual LVDS panel (132MHz pixel clock) NAND
> flash accesses have a tendency to cause display disturbances. Add a
> module param to disable DMA from the NAND controller, since that fixes
> the display problem for me.
>
> Signed-off-by: Peter Rosin <peda@...ntia.se>
Reviewed-by: Boris Brezillon <boris.brezillon@...tlin.com>
Miquel, can you queue this one to nand/next.
> ---
> drivers/mtd/nand/raw/atmel/nand-controller.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
> index b2f00b398490..2ff7a77c7b8e 100644
> --- a/drivers/mtd/nand/raw/atmel/nand-controller.c
> +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
> @@ -129,6 +129,11 @@
> #define DEFAULT_TIMEOUT_MS 1000
> #define MIN_DMA_LEN 128
>
> +static bool atmel_nand_avoid_dma __read_mostly;
> +
> +MODULE_PARM_DESC(avoiddma, "Avoid using DMA");
> +module_param_named(avoiddma, atmel_nand_avoid_dma, bool, 0400);
> +
> enum atmel_nand_rb_type {
> ATMEL_NAND_NO_RB,
> ATMEL_NAND_NATIVE_RB,
> @@ -1977,7 +1982,7 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
> return ret;
> }
>
> - if (nc->caps->has_dma) {
> + if (nc->caps->has_dma && !atmel_nand_avoid_dma) {
> dma_cap_mask_t mask;
>
> dma_cap_zero(mask);
Powered by blists - more mailing lists