linux-kernel - [PATCH 4.16 154/279] pinctrl: cherryview: Associate IRQ descriptors to irqdomain

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180618080615.206240615@linuxfoundation.org>
Date:   Mon, 18 Jun 2018 10:12:19 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Sultan Alsawaf <sultanxda@...il.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.16 154/279] pinctrl: cherryview: Associate IRQ descriptors to irqdomain

4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@...ux.intel.com>

[ Upstream commit 83b9dc11312f48a561594a895672abb6cb2a2250 ]

When we dropped the custom Linux GPIO translation it resulted that the
IRQ numbers changed slightly as well. Normally this would be fine
because everyone is expected to use controller relative GPIO numbers and
ACPI GpioIo/GpioInt resources. However, there is a certain set of
Intel_Strago based Chromebooks where i8042 keyboard controller IRQ
number is hardcoded be 182 (this is corrected with newer coreboot but
the older ones still have the hardcoded Linux IRQ number). Because of
this hardcoded IRQ number keyboard on those systems accidentally broke
again.

Fix this by iteratively associating IRQ descriptors to the chip irqdomain
so that there are no gaps on those systems. Other systems are not
affected.

Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199463
Reported-by: Sultan Alsawaf <sultanxda@...il.com>
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/pinctrl/intel/pinctrl-cherryview.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1622,22 +1622,30 @@ static int chv_gpio_probe(struct chv_pin
 
 	if (!need_valid_mask) {
 		irq_base = devm_irq_alloc_descs(pctrl->dev, -1, 0,
-						chip->ngpio, NUMA_NO_NODE);
+						community->npins, NUMA_NO_NODE);
 		if (irq_base < 0) {
 			dev_err(pctrl->dev, "Failed to allocate IRQ numbers\n");
 			return irq_base;
 		}
-	} else {
-		irq_base = 0;
 	}
 
-	ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, irq_base,
+	ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0,
 				   handle_bad_irq, IRQ_TYPE_NONE);
 	if (ret) {
 		dev_err(pctrl->dev, "failed to add IRQ chip\n");
 		return ret;
 	}
 
+	if (!need_valid_mask) {
+		for (i = 0; i < community->ngpio_ranges; i++) {
+			range = &community->gpio_ranges[i];
+
+			irq_domain_associate_many(chip->irq.domain, irq_base,
+						  range->base, range->npins);
+			irq_base += range->npins;
+		}
+	}
+
 	gpiochip_set_chained_irqchip(chip, &chv_gpio_irqchip, irq,
 				     chv_gpio_irq_handler);
 	return 0;