linux-kernel - [RFC PATCH v2 0/6] mtd: rawnand: support MT29F1G08ABAFAWP-ITE:F

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180619053125.16792-1-chris.packham@alliedtelesis.co.nz>
Date:   Tue, 19 Jun 2018 17:31:19 +1200
From:   Chris Packham <chris.packham@...iedtelesis.co.nz>
To:     miquel.raynal@...tlin.com, boris.brezillon@...tlin.com,
        dwmw2@...radead.org, computersforpeace@...il.com,
        linux-mtd@...ts.infradead.org
Cc:     linux-kernel@...r.kernel.org,
        Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [RFC PATCH v2 0/6] mtd: rawnand: support MT29F1G08ABAFAWP-ITE:F

Hi,

I'm looking at adding support for the Micron MT29F1G08ABAFAWP-ITE:F chip
to one of our boards which uses the Marvell NFCv2 controller.

This particular chip is a bit odd in that the datasheet states support
for ONFI 1.0 but the revision number field is 00 00. It also is marked
ABAFA but reports internally as ABAGA. Finally it has internal 8-bit ECC
which cannot be disabled.

The existing test in micron_supports_on_die_ecc() determines that on-die
ECC is supported but not mandatory but I know for this chip it is
mandatory despite what set_features returns.

In order for this to work I need to set nand-ecc-mode = "on-die" in my
dts. Ideally I'd like it to be automatic based on what the hardware can
support but that may be asking too much at the moment.

I think I need to do some re-testing on other Micron parts so this
series is still RFC. Although the first 3 patches are probably good to
go.

Here's a dump of the parameter page from the chip I have

00000000: 4f 4e 46 49 00 00 18 00 3f 00 00 00 00 00 00 00 ONFI....?.......
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 4d 49 43 52 4f 4e 20 20 20 20 20 20 4d 54 32 39  MICRON MT29
00000030: 46 31 47 30 38 41 42 41 47 41 57 50 20 20 20 20  F1G08ABAGAWP    
00000040: 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ,...............
00000050: 00 08 00 00 80 00 00 02 00 00 20 00 40 00 00 00  ..........  .@...
00000060: 00 04 00 00 01 22 01 14 00 01 05 08 00 00 04 00 ....."..........
00000070: 08 01 0e 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000080: 08 3f 00 3f 00 58 02 10 27 46 00 64 00 00 00 00 .?.?.X..'F.d....
00000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
000000a0: 00 00 00 00 01 00 00 00 00 02 04 80 01 81 04 03 ................
000000b0: 02 01 1e 90 00 00 00 00 00 00 00 00 00 00 00 00 ................
000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 85 a6 ................

Chris Packham (6):
  mtd: rawnand: marvell: Handle on-die ECC
  mtd: rawnand: add manufacturer fixup for ONFI parameter page
  mtd: rawnand: micron: add fixup for ONFI revision
  mtd: rawnand: marvell: Support page size of 2048 with 8-bit ECC
  mtd: rawnand: micron: add ONFI_FEATURE_ON_DIE_ECC to supported
    features
  mtd: rawnand: micron: support 8/512 on-die ECC

 drivers/mtd/nand/raw/marvell_nand.c |  2 ++
 drivers/mtd/nand/raw/nand_base.c    |  4 ++++
 drivers/mtd/nand/raw/nand_micron.c  | 18 ++++++++++++++----
 include/linux/mtd/rawnand.h         |  1 +
 4 files changed, 21 insertions(+), 4 deletions(-)

-- 
2.17.1