[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1529320103-7711-6-git-send-email-radhey.shyam.pandey@xilinx.com>
Date: Mon, 18 Jun 2018 05:08:23 -0600
From: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>
To: <davem@...emloft.net>, <andrew@...n.ch>, <michal.simek@...inx.com>,
<radhey.shyam.pandey@...inx.com>
CC: <netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 5/5] net: emaclite: Remove unnecessary spaces
This patch fixes below checkpatch checks-
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: No space is necessary after a cast
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>
---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index e8bb7b3..f62e4b6 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -95,11 +95,11 @@
-#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
+#define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */
#define ALIGNMENT 4
/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
-#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32)adr)) % ALIGNMENT)
#ifdef __BIG_ENDIAN
#define xemaclite_readl ioread32be
@@ -239,8 +239,8 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
/* Set up to output the remaining data */
align_buffer = 0;
- to_u8_ptr = (u8 *) &align_buffer;
- from_u8_ptr = (u8 *) from_u16_ptr;
+ to_u8_ptr = (u8 *)&align_buffer;
+ from_u8_ptr = (u8 *)from_u16_ptr;
/* Output the remaining data */
for (; length > 0; length--)
@@ -273,7 +273,7 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u32 align_buffer;
from_u32_ptr = src_ptr;
- to_u16_ptr = (u16 *) dest_ptr;
+ to_u16_ptr = (u16 *)dest_ptr;
for (; length > 3; length -= 4) {
/* Copy each word into the temporary buffer */
@@ -289,9 +289,9 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u8 *to_u8_ptr, *from_u8_ptr;
/* Set up to read the remaining data */
- to_u8_ptr = (u8 *) to_u16_ptr;
+ to_u8_ptr = (u8 *)to_u16_ptr;
align_buffer = *from_u32_ptr++;
- from_u8_ptr = (u8 *) &align_buffer;
+ from_u8_ptr = (u8 *)&align_buffer;
/* Read the remaining data */
for (; length > 0; length--)
@@ -351,7 +351,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
return -1; /* Buffer was full, return failure */
/* Write the frame to the buffer */
- xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+ xemaclite_aligned_write(data, (u32 __force *)addr, byte_count);
xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK),
addr + XEL_TPLR_OFFSET);
@@ -448,7 +448,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
length = maxlen;
/* Read from the EmacLite device */
- xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+ xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET),
data, length);
/* Acknowledge the frame */
@@ -479,7 +479,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
/* Determine the expected Tx buffer address */
addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
- xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+ xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN);
xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);
@@ -574,7 +574,7 @@ static void xemaclite_tx_handler(struct net_device *dev)
dev->stats.tx_packets++;
if (lp->deferred_skb) {
if (xemaclite_send_data(lp,
- (u8 *) lp->deferred_skb->data,
+ (u8 *)lp->deferred_skb->data,
lp->deferred_skb->len) != 0)
return;
dev->stats.tx_bytes += lp->deferred_skb->len;
@@ -619,7 +619,7 @@ static void xemaclite_rx_handler(struct net_device *dev)
skb_reserve(skb, 2);
- len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
+ len = xemaclite_recv_data(lp, (u8 *)skb->data, len);
if (!len) {
dev->stats.rx_errors++;
@@ -1032,7 +1032,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
new_skb = orig_skb;
spin_lock_irqsave(&lp->reset_lock, flags);
- if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+ if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) {
/* If the Emaclite Tx buffer is busy, stop the Tx queue and
* defer the skb for transmission during the ISR, after the
* current transmission is complete
--
2.7.4
Powered by blists - more mailing lists