[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <80f7baefefce0a3a96e8b46e54cb84d803d6aa35.1529404894.git.matti.vaittinen@fi.rohmeurope.com>
Date: Tue, 19 Jun 2018 13:56:17 +0300
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, lee.jones@...aro.org, lgirdwood@...il.com,
broonie@...nel.org, mazziesaccount@...il.com, arnd@...db.de,
dmitry.torokhov@...il.com, sre@...nel.org, chenjh@...k-chips.com,
andrew.smirnov@...il.com, linus.walleij@...aro.org,
kstewart@...uxfoundation.org, heiko@...ech.de,
gregkh@...uxfoundation.org
Cc: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
mikko.mutanen@...rohmeurope.com, heikki.haikola@...rohmeurope.com
Subject: [PATCH v7 2/4] mfd: bd71837: Devicetree bindings for ROHM BD71837
PMIC
Document devicetree bindings for ROHM BD71837 PMIC MFD.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 67 ++++++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
new file mode 100644
index 000000000000..67f2616288d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt
@@ -0,0 +1,67 @@
+* ROHM BD71837 Power Management Integrated Circuit bindings
+
+BD71837MWV is a programmable Power Management IC for powering single-core,
+dual-core, and quad-core SoC’s such as NXP-i.MX 8M. It is optimized for
+low BOM cost and compact solution footprint. It integrates 8 Buck
+egulators and 7 LDO’s to provide all the power rails required by the SoC and
+the commonly used peripherals.
+
+Datasheet for PMIC is available at:
+https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
+
+Required properties:
+ - compatible : Should be "rohm,bd71837".
+ - reg : I2C slave address.
+ - interrupt-parent : Phandle to the parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - clocks : The parent clock connected to PMIC. If this is missng
+ 32768 KHz clock is assumed.
+ - #clock-cells : Should be 0
+ - regulators: : List of child nodes that specify the regulators
+ Please see ../regulator/rohm,bd71837-regulator.txt
+
+Optional properties:
+- clock-output-names : Should contain name for output clock.
+
+Example:
+
+ /* external oscillator node */
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc";
+ };
+
+ /* PMIC node */
+
+ pmic: pmic@4b {
+ compatible = "rohm,bd71837";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 GPIO_ACTIVE_LOW>;
+ interrupt-names = "irq";
+ #clock-cells = <0>;
+ clocks = <&osc 0>;
+ clock-output-names = "bd71837-32k-out";
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <1250>;
+ };
+ /* ... */
+ };
+ };
+
+ /* Clock consumer node */
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&pmic>;
+ };
--
2.14.3
Powered by blists - more mailing lists