[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180620182512.GA14562@rob-hp-laptop>
Date: Wed, 20 Jun 2018 12:25:12 -0600
From: Rob Herring <robh@...nel.org>
To: Maciej Purski <m.purski@...sung.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org, David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Thierry Reding <thierry.reding@...il.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Archit Taneja <architt@...eaurora.org>,
Andrzej Hajda <a.hajda@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Inki Dae <inki.dae@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [PATCH v3 4/9] dt-bindings: display: add DT bindings for BOE
HV070WSA-100 panel
On Tue, Jun 19, 2018 at 10:19:25AM +0200, Maciej Purski wrote:
> From: Andrzej Hajda <a.hajda@...sung.com>
>
> The patch adds bindings to BOE HV070-WSA WSVGA panel.
> Bindings are compatible with simple panel bindings.
>
> Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
> Signed-off-by: Maciej Purski <m.purski@...sung.com>
> ---
> .../bindings/display/panel/boe,hv070wsa-100.txt | 28 ++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
> new file mode 100644
> index 0000000..9e8eea8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
> @@ -0,0 +1,28 @@
> +BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,hv070wsa-100"
> +- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
> +- enable-gpio: GPIO pin to enable and disable panel (active high)
enable-gpios
With that,
Reviewed-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists