| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180620050103.GC21984@in.ibm.com>
Date: Wed, 20 Jun 2018 10:31:03 +0530
From: Gautham R Shenoy <ego@...ux.vnet.ibm.com>
To: Akshay Adiga <akshay.adiga@...ux.vnet.ibm.com>
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
linux-pm@...r.kernel.org, rjw@...ysocki.net,
svaidy@...ux.vnet.ibm.com, ego@...ux.vnet.ibm.com,
npiggin@...il.com, mpe@...erman.id.au
Subject: Re: [PATCH 3/3] powernv/cpuidle: Use parsed device tree values for
cpuidle_init
Hi Akshay,
On Tue, Jun 19, 2018 at 10:34:28AM +0530, Akshay Adiga wrote:
> Export pnv_idle_states and nr_pnv_idle_states so that its accessible to
> cpuidle driver. Use properties from pnv_idle_states structure for powernv
> cpuidle_init.
>
> Signed-off-by: Akshay Adiga <akshay.adiga@...ux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/cpuidle.h | 2 ++
> drivers/cpuidle/cpuidle-powernv.c | 49 +++++++++++++++++++++++---------------
> 2 files changed, 32 insertions(+), 19 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h
> index 55ee7e3..1446747 100644
> --- a/arch/powerpc/include/asm/cpuidle.h
> +++ b/arch/powerpc/include/asm/cpuidle.h
> @@ -93,6 +93,8 @@ struct pnv_idle_states_t {
> u32 flags;
> };
>
> +extern struct pnv_idle_states_t *pnv_idle_states;
> +extern int nr_pnv_idle_states;
> extern u32 pnv_fastsleep_workaround_at_entry[];
> extern u32 pnv_fastsleep_workaround_at_exit[];
>
> diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> index d29e4f0..de8ba26 100644
> --- a/drivers/cpuidle/cpuidle-powernv.c
> +++ b/drivers/cpuidle/cpuidle-powernv.c
> @@ -285,6 +285,11 @@ static int powernv_add_idle_states(void)
> goto out;
> }
>
> + if (nr_pnv_idle_states <= 0) {
> + pr_warn("opal: No idle states found\n");
We would have a warning of this type in the powernv/idle.c right ? We
don't need to warn again. Or at least have a different warning
something like:
pr_warn("cpuidle: Only snooze state is available\n");
> + goto out;
> + }
> +
> /* Read values of any property to determine the num of idle states */
> dt_idle_states = of_property_count_u32_elems(power_mgt, "ibm,cpu-idle-state-flags");
We don't need to get dt_idle_states from the device tree now that we
have nr_pnv_idle_states.
> if (dt_idle_states < 0) {
> @@ -338,7 +343,7 @@ static int powernv_add_idle_states(void)
> * If the idle states use stop instruction, probe for psscr values
> * and psscr mask which are necessary to specify required stop level.
> */
> - has_stop_states = (flags[0] &
> + has_stop_states = (pnv_idle_states[0].flags &
> (OPAL_PM_STOP_INST_FAST | OPAL_PM_STOP_INST_DEEP));
> if (has_stop_states) {
> count = of_property_count_u64_elems(power_mgt,
> @@ -387,51 +392,55 @@ static int powernv_add_idle_states(void)
> residency_ns, dt_idle_states);
> }
>
> - for (i = 0; i < dt_idle_states; i++) {
> + for (i = 0; i < nr_pnv_idle_states; i++) {
> unsigned int exit_latency, target_residency;
> bool stops_timebase = false;
> + struct pnv_idle_states_t *state = &pnv_idle_states[i];
>
> /*
> * Skip the platform idle state whose flag isn't in
> - * the supported_cpuidle_states flag mask.
> + * the supported_pnv_idle_states flag mask.
> */
> - if ((flags[i] & supported_flags) != flags[i])
> + if ((state->flags & supported_flags) !=
> + state->flags)
> continue;
> /*
> * If an idle state has exit latency beyond
> * POWERNV_THRESHOLD_LATENCY_NS then don't use it
> * in cpu-idle.
> */
> - if (latency_ns[i] > POWERNV_THRESHOLD_LATENCY_NS)
> + if (state->latency_ns > POWERNV_THRESHOLD_LATENCY_NS)
> continue;
> /*
> * Firmware passes residency and latency values in ns.
> * cpuidle expects it in us.
> */
> - exit_latency = DIV_ROUND_UP(latency_ns[i], 1000);
> + exit_latency = DIV_ROUND_UP(state->latency_ns, 1000);
> if (!rc)
> - target_residency = DIV_ROUND_UP(residency_ns[i], 1000);
> + target_residency = DIV_ROUND_UP(state->residency_ns, 1000);
> else
> target_residency = 0;
>
> if (has_stop_states) {
> - int err = validate_psscr_val_mask(&psscr_val[i],
> - &psscr_mask[i],
> - flags[i]);
> + int err;
> + err = validate_psscr_val_mask(&state->pm_ctrl_reg_val,
> + &state->pm_ctrl_reg_mask,
> + state->flags);
> if (err) {
> - report_invalid_psscr_val(psscr_val[i], err);
> + report_invalid_psscr_val(state->pm_ctrl_reg_val,
> + err);
> continue;
> }
We have already validated the states once. We should simply use the
result here.
> }
>
> - if (flags[i] & OPAL_PM_TIMEBASE_STOP)
> + if (state->flags & OPAL_PM_TIMEBASE_STOP)
> stops_timebase = true;
>
> /*
> * For nap and fastsleep, use default target_residency
> * values if f/w does not expose it.
> */
> - if (flags[i] & OPAL_PM_NAP_ENABLED) {
> + if (state->flags & OPAL_PM_NAP_ENABLED) {
> if (!rc)
> target_residency = 100;
> /* Add NAP state */
> @@ -439,10 +448,11 @@ static int powernv_add_idle_states(void)
> CPUIDLE_FLAG_NONE, nap_loop,
> target_residency, exit_latency, 0, 0);
> } else if (has_stop_states && !stops_timebase) {
> - add_powernv_state(nr_idle_states, names[i],
> + add_powernv_state(nr_idle_states, state->name,
> CPUIDLE_FLAG_NONE, stop_loop,
> target_residency, exit_latency,
> - psscr_val[i], psscr_mask[i]);
> + state->pm_ctrl_reg_val,
> + state->pm_ctrl_reg_mask);
> }
>
> /*
> @@ -450,8 +460,8 @@ static int powernv_add_idle_states(void)
> * within this config dependency check.
> */
> #ifdef CONFIG_TICK_ONESHOT
> - else if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
> - flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
> + else if (state->flags & OPAL_PM_SLEEP_ENABLED ||
> + state->flags & OPAL_PM_SLEEP_ENABLED_ER1) {
> if (!rc)
> target_residency = 300000;
> /* Add FASTSLEEP state */
> @@ -460,10 +470,11 @@ static int powernv_add_idle_states(void)
> fastsleep_loop,
> target_residency, exit_latency, 0, 0);
> } else if (has_stop_states && stops_timebase) {
> - add_powernv_state(nr_idle_states, names[i],
> + add_powernv_state(nr_idle_states, state->name,
> CPUIDLE_FLAG_TIMER_STOP, stop_loop,
> target_residency, exit_latency,
> - psscr_val[i], psscr_mask[i]);
> + state->pm_ctrl_reg_val,
> + state->pm_ctrl_reg_mask);
> }
> #endif
> else
> --
> 2.5.5
>
Powered by blists - more mailing lists