[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20180620104750.unr2xryqszbv33mo@fsr-ub1664-175>
Date: Wed, 20 Jun 2018 10:47:51 +0000
From: Abel Vesa <abel.vesa@....com>
To: Lucas Stach <l.stach@...gutronix.de>
CC: "A.s. Dong" <aisheng.dong@....com>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
Shawn Guo <shawnguo@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Abel Vesa <abelvesa@...ux.com>
Subject: Re: [PATCH v3 2/3] pinctrl: imx: allow to configure SION with generic
pinconf
On Wed, Jun 20, 2018 at 10:16:42AM +0200, Lucas Stach wrote:
> Hi Abel,
>
> as this series switches back to using the raw padcfg values in DT
> instead of generic pinconf (which I think is the right move), we can
> drop this patch from the series.
>
Cool, will drop it in the next version.
Thanks,
Abel
> Regards,
> Lucas
>
> Am Mittwoch, den 20.06.2018, 10:24 +0300 schrieb Abel Vesa:
> > > From: Lucas Stach <l.stach@...gutronix.de>
> >
> > The SION bit force enables the input buffer, overriding the configuration
> > driven by the muxed module. It is not located in the pad config register,
> > but in the mux register and thus needs special handling.
> >
> > > Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
> > > Signed-off-by: Abel Vesa <abel.vesa@....com>
> > ---
> > drivers/pinctrl/freescale/pinctrl-imx.c | 19 +++++++------------
> > drivers/pinctrl/freescale/pinctrl-imx.h | 4 ++++
> > 2 files changed, 11 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
> > index 1c6bb15..335edc9 100644
> > --- a/drivers/pinctrl/freescale/pinctrl-imx.c
> > +++ b/drivers/pinctrl/freescale/pinctrl-imx.c
> > @@ -26,10 +26,6 @@
> > #include "../pinmux.h"
> > #include "pinctrl-imx.h"
> >
> > -/* The bits in CONFIG cell defined in binding doc*/
> > > > -#define IMX_NO_PAD_CTL 0x80000000 /* no pin config need */
> > > -#define IMX_PAD_SION 0x40000000 /* set SION */
> > -
> > static inline const struct group_desc *imx_pinctrl_find_group_by_name(
> > > struct pinctrl_dev *pctldev,
> > > const char *name)
> > @@ -514,18 +510,17 @@ static int imx_pinctrl_parse_groups(struct device_node *np,
> > > pin->mux_mode = be32_to_cpu(*list++);
> > > pin->input_val = be32_to_cpu(*list++);
> >
> > > - if (info->generic_pinconf) {
> > > + if (info->generic_pinconf)
> > > /* generic pin config decoded */
> > > pin->config = config;
> > > - } else {
> > > + else
> > > /* legacy pin config read from devicetree */
> > > - config = be32_to_cpu(*list++);
> > > + pin->config = be32_to_cpu(*list++);
> >
> > > - /* SION bit is in mux register */
> > > - if (config & IMX_PAD_SION)
> > > - pin->mux_mode |= IOMUXC_CONFIG_SION;
> > > - pin->config = config & ~IMX_PAD_SION;
> > > - }
> > > + /* SION bit is in mux register */
> > > + if (pin->config & IMX_PAD_SION)
> > > + pin->mux_mode |= IOMUXC_CONFIG_SION;
> > > + pin->config = pin->config & ~IMX_PAD_SION;
> >
> > > dev_dbg(ipctl->dev, "%s: 0x%x 0x%08lx", info->pins[pin_id].name,
> > > pin->mux_mode, pin->config);
> > diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
> > index 4b8225c..44567a6 100644
> > --- a/drivers/pinctrl/freescale/pinctrl-imx.h
> > +++ b/drivers/pinctrl/freescale/pinctrl-imx.h
> > @@ -14,6 +14,10 @@
> > #include <linux/pinctrl/pinconf-generic.h>
> > #include <linux/pinctrl/pinmux.h>
> >
> > +/* The bits in CONFIG cell defined in binding doc*/
> > > > +#define IMX_NO_PAD_CTL 0x80000000 /* no pin config need */
> > > +#define IMX_PAD_SION 0x40000000 /* set SION */
> > +
> > struct platform_device;
> >
> > extern struct pinmux_ops imx_pmx_ops;
--
Powered by blists - more mailing lists