| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e9babb86-7588-5de6-93ab-4cdd8982e773@st.com>
Date: Wed, 20 Jun 2018 15:24:07 +0200
From: Ludovic BARRE <ludovic.barre@...com>
To: Guenter Roeck <linux@...ck-us.net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Rob Herring <robh+dt@...nel.org>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<linux-watchdog@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH V2 1/3] watchdog: stm32: add pclk feature for stm32mp1
On 06/20/2018 11:19 AM, Guenter Roeck wrote:
> On 06/20/2018 12:53 AM, Ludovic Barre wrote:
>> From: Ludovic Barre <ludovic.barre@...com>
>>
>> This patch adds config data to manage specific properties by
>> compatible. Adds stm32mp1 config which requires pclk clock.
>>
>> Signed-off-by: Ludovic Barre <ludovic.barre@...com>
>> ---
>> .../devicetree/bindings/watchdog/st,stm32-iwdg.txt | 21 +++-
>> drivers/watchdog/stm32_iwdg.c | 132
>> ++++++++++++++-------
>> 2 files changed, 104 insertions(+), 49 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
>> b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
>> index cc13b10a..f07f6d89 100644
>> --- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
>> +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
>> @@ -2,18 +2,31 @@ STM32 Independent WatchDoG (IWDG)
>> ---------------------------------
>> Required properties:
>> -- compatible: "st,stm32-iwdg"
>> -- reg: physical base address and length of the registers set for the
>> device
>> -- clocks: must contain a single entry describing the clock input
>> +- compatible: Should be either "st,stm32-iwdg" or "st,stm32mp1-iwdg"
>> +- reg: Physical base address and length of the registers set for the
>> device
>> +- clocks: Reference to the clock entry lsi. Additional pclk clock entry
>> + is required only for st,stm32mp1-iwdg.
>> +- clock-names: Name of the clocks used.
>> + "lsi" for st,stm32-iwdg
>> + "pclk", "lsi" for st,stm32mp1-iwdg
>> Optional Properties:
>> - timeout-sec: Watchdog timeout value in seconds.
>> -Example:
>> +Examples:
>> iwdg: watchdog@...03000 {
>> compatible = "st,stm32-iwdg";
>> reg = <0x40003000 0x400>;
>> clocks = <&clk_lsi>;
>> + clock-names = "lsi";
>> + timeout-sec = <32>;
>> +};
>> +
>> +iwdg: iwdg@...02000 {
>> + compatible = "st,stm32mp1-iwdg";
>> + reg = <0x5a002000 0x400>;
>> + clocks = <&rcc IWDG2>, <&clk_lsi>;
>> + clock-names = "pclk", "lsi";
>> timeout-sec = <32>;
>> };
>> diff --git a/drivers/watchdog/stm32_iwdg.c
>> b/drivers/watchdog/stm32_iwdg.c
>> index c97ad56..fc96670 100644
>> --- a/drivers/watchdog/stm32_iwdg.c
>> +++ b/drivers/watchdog/stm32_iwdg.c
>> @@ -11,12 +11,13 @@
>> #include <linux/clk.h>
>> #include <linux/delay.h>
>> -#include <linux/kernel.h>
>> -#include <linux/module.h>
>> #include <linux/interrupt.h>
>> #include <linux/io.h>
>> #include <linux/iopoll.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> #include <linux/of.h>
>> +#include <linux/of_device.h>
>> #include <linux/platform_device.h>
>> #include <linux/watchdog.h>
>> @@ -54,11 +55,17 @@
>> #define TIMEOUT_US 100000
>> #define SLEEP_US 1000
>> +struct stm32_iwdg_config {
>> + bool has_pclk;
>> +};
>> +
>
> This data structure is unnecessary. Just assign the boolean directly to
> .data
> and ...
>
Ok, I send a v3, with boolean directly to .data
like:
#define NO_PCLK false
#define HAS_PCLK true
...
static const struct of_device_id stm32_iwdg_of_match[] = {
{ .compatible = "st,stm32-iwdg", .data = (void *) NO_PCLK },
{ .compatible = "st,stm32mp1-iwdg", .data = (void *) HAS_PCLK },
{ /* end node */ }
};
Note:
V3, because I sent my original version with V2
(it's mistake)
>> struct stm32_iwdg {
>> - struct watchdog_device wdd;
>> - void __iomem *regs;
>> - struct clk *clk;
>> - unsigned int rate;
>> + struct watchdog_device wdd;
>> + void __iomem *regs;
>> + struct stm32_iwdg_config *config;
>
> declare bool has_pclk here.
>
>> + struct clk *clk_lsi;
>> + struct clk *clk_pclk;
>> + unsigned int rate;
>> };
>> static inline u32 reg_read(void __iomem *base, u32 reg)
>> @@ -133,6 +140,44 @@ static int stm32_iwdg_set_timeout(struct
>> watchdog_device *wdd,
>> return 0;
>> }
>> +static int stm32_iwdg_clk_init(struct platform_device *pdev,
>> + struct stm32_iwdg *wdt)
>> +{
>> + u32 ret;
>> +
>> + wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi");
>> + if (IS_ERR(wdt->clk_lsi)) {
>> + dev_err(&pdev->dev, "Unable to get lsi clock\n");
>> + return PTR_ERR(wdt->clk_lsi);
>> + }
>> +
>> + /* optional peripheral clock */
>> + if (wdt->config->has_pclk) {
>> + wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
>> + if (IS_ERR(wdt->clk_pclk)) {
>> + dev_err(&pdev->dev, "Unable to get pclk clock\n");
>> + return PTR_ERR(wdt->clk_pclk);
>> + }
>> +
>> + ret = clk_prepare_enable(wdt->clk_pclk);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Unable to prepare pclk clock\n");
>> + return ret;
>> + }
>> + }
>> +
>> + ret = clk_prepare_enable(wdt->clk_lsi);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Unable to prepare lsi clock\n");
>> + clk_disable_unprepare(wdt->clk_pclk);
>> + return ret;
>> + }
>> +
>> + wdt->rate = clk_get_rate(wdt->clk_lsi);
>> +
>> + return 0;
>> +}
>> +
>> static const struct watchdog_info stm32_iwdg_info = {
>> .options = WDIOF_SETTIMEOUT |
>> WDIOF_MAGICCLOSE |
>> @@ -147,49 +192,50 @@ static const struct watchdog_ops stm32_iwdg_ops = {
>> .set_timeout = stm32_iwdg_set_timeout,
>> };
>> +static const struct stm32_iwdg_config stm32_iwdg_cfg = {
>> + .has_pclk = false,
>> +};
>> +
>> +static const struct stm32_iwdg_config stm32mp1_iwdg_cfg = {
>> + .has_pclk = true,
>> +};
>> +
>> +static const struct of_device_id stm32_iwdg_of_match[] = {
>> + { .compatible = "st,stm32-iwdg", .data = &stm32_iwdg_cfg },
>> + { .compatible = "st,stm32mp1-iwdg", .data = &stm32mp1_iwdg_cfg },
>> + { /* end node */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
>> +
>> static int stm32_iwdg_probe(struct platform_device *pdev)
>> {
>> struct watchdog_device *wdd;
>> + const struct of_device_id *match;
>> struct stm32_iwdg *wdt;
>> struct resource *res;
>> - void __iomem *regs;
>> - struct clk *clk;
>> int ret;
>> + match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
>> + if (!match || !match->data)
>> + return -ENODEV;
>> +
>> + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
>> + if (!wdt)
>> + return -ENOMEM;
>> +
>> + wdt->config = (struct stm32_iwdg_config *)match->data;
>> +
>> /* This is the timer base. */
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> - regs = devm_ioremap_resource(&pdev->dev, res);
>> - if (IS_ERR(regs)) {
>> + wdt->regs = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(wdt->regs)) {
>> dev_err(&pdev->dev, "Could not get resource\n");
>> - return PTR_ERR(regs);
>> + return PTR_ERR(wdt->regs);
>> }
>> - clk = devm_clk_get(&pdev->dev, NULL);
>> - if (IS_ERR(clk)) {
>> - dev_err(&pdev->dev, "Unable to get clock\n");
>> - return PTR_ERR(clk);
>> - }
>> -
>> - ret = clk_prepare_enable(clk);
>> - if (ret) {
>> - dev_err(&pdev->dev, "Unable to prepare clock %p\n", clk);
>> + ret = stm32_iwdg_clk_init(pdev, wdt);
>> + if (ret)
>> return ret;
>> - }
>> -
>> - /*
>> - * Allocate our watchdog driver data, which has the
>> - * struct watchdog_device nested within it.
>> - */
>> - wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
>> - if (!wdt) {
>> - ret = -ENOMEM;
>> - goto err;
>> - }
>> -
>> - /* Initialize struct stm32_iwdg. */
>> - wdt->regs = regs;
>> - wdt->clk = clk;
>> - wdt->rate = clk_get_rate(clk);
>> /* Initialize struct watchdog_device. */
>> wdd = &wdt->wdd;
>> @@ -217,7 +263,8 @@ static int stm32_iwdg_probe(struct platform_device
>> *pdev)
>> return 0;
>> err:
>> - clk_disable_unprepare(clk);
>> + clk_disable_unprepare(wdt->clk_lsi);
>> + clk_disable_unprepare(wdt->clk_pclk);
>> return ret;
>> }
>> @@ -227,23 +274,18 @@ static int stm32_iwdg_remove(struct
>> platform_device *pdev)
>> struct stm32_iwdg *wdt = platform_get_drvdata(pdev);
>> watchdog_unregister_device(&wdt->wdd);
>> - clk_disable_unprepare(wdt->clk);
>> + clk_disable_unprepare(wdt->clk_lsi);
>> + clk_disable_unprepare(wdt->clk_pclk);
>> return 0;
>> }
>> -static const struct of_device_id stm32_iwdg_of_match[] = {
>> - { .compatible = "st,stm32-iwdg" },
>> - { /* end node */ }
>> -};
>> -MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
>> -
>> static struct platform_driver stm32_iwdg_driver = {
>> .probe = stm32_iwdg_probe,
>> .remove = stm32_iwdg_remove,
>> .driver = {
>> .name = "iwdg",
>> - .of_match_table = stm32_iwdg_of_match,
>> + .of_match_table = of_match_ptr(stm32_iwdg_of_match),
>> },
>> };
>> module_platform_driver(stm32_iwdg_driver);
>>
>
Powered by blists - more mailing lists