[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <98be2b2cfd6dfb9cdfed95da5fe8cde0a96ce37e.1529595907.git.gustavo.pimentel@synopsys.com>
Date: Thu, 21 Jun 2018 17:01:32 +0100
From: Gustavo Pimentel <gustavo.pimentel@...opsys.com>
To: bhelgaas@...gle.com, lorenzo.pieralisi@....com,
Joao.Pinto@...opsys.com, jingoohan1@...il.com, kishon@...com,
adouglas@...ence.com, jesper.nilsson@...s.com,
shawn.lin@...k-chips.com
Cc: linux-pci@...r.kernel.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>
Subject: [PATCH v6 07/11] pci-epf-test/pci_endpoint_test: Use irq_type module parameter
Add new driver parameter to allow interruption type selection.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@...opsys.com>
---
Change v2->v3:
- New patch file created base on the previous patch
"misc: pci_endpoint_test: Add MSI-X support" patch file following
Kishon's suggestion.
Change v3->v4:
- Rebased to Lorenzo's master branch v4.18-rc1.
Change v4->v5:
- Nothing changed, just to follow the patch set version.
Change v5->v6:
- Nothing changed, just to follow the patch set version.
drivers/misc/pci_endpoint_test.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 35fbfbd..4d2c9cb 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -82,6 +82,10 @@ static bool no_msi;
module_param(no_msi, bool, 0444);
MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test");
+static int irq_type = IRQ_TYPE_MSI;
+module_param(irq_type, int, 0444);
+MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI)");
+
enum pci_barno {
BAR_0,
BAR_1,
@@ -108,7 +112,7 @@ struct pci_endpoint_test {
struct pci_endpoint_test_data {
enum pci_barno test_reg_bar;
size_t alignment;
- bool no_msi;
+ int irq_type;
};
static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
@@ -291,8 +295,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
size);
- pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
- no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
COMMAND_COPY);
@@ -361,8 +364,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
- pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
- no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
COMMAND_READ);
@@ -419,8 +421,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
- pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE,
- no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI);
+ pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
COMMAND_WRITE);
@@ -505,11 +506,14 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
test->alignment = 0;
test->pdev = pdev;
+ if (no_msi)
+ irq_type = IRQ_TYPE_LEGACY;
+
data = (struct pci_endpoint_test_data *)ent->driver_data;
if (data) {
test_reg_bar = data->test_reg_bar;
test->alignment = data->alignment;
- no_msi = data->no_msi;
+ irq_type = data->irq_type;
}
init_completion(&test->irq_raised);
@@ -529,13 +533,21 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
pci_set_master(pdev);
- if (!no_msi) {
+ switch (irq_type) {
+ case IRQ_TYPE_LEGACY:
+ irq = 0;
+ break;
+ case IRQ_TYPE_MSI:
irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
if (irq < 0)
dev_err(dev, "Failed to get MSI interrupts\n");
test->num_irqs = irq;
+ break;
+ default:
+ dev_err(dev, "Invalid IRQ type selected\n");
}
+
err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler,
IRQF_SHARED, DRV_MODULE_NAME, test);
if (err) {
--
2.7.4
Powered by blists - more mailing lists