[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <AM0PR04MB4211C586B7824172B9B2232280750@AM0PR04MB4211.eurprd04.prod.outlook.com>
Date: Fri, 22 Jun 2018 11:11:46 +0000
From: "A.s. Dong" <aisheng.dong@....com>
To: Abel Vesa <abel.vesa@....com>, Lucas Stach <l.stach@...gutronix.de>
CC: "linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
dl-linux-imx <linux-imx@....com>,
Shawn Guo <shawnguo@...nel.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Abel Vesa <abelvesa@...ux.com>
Subject: RE: [PATCH v4 1/2] dt-bindings: add binding for i.MX8MQ IOMUXC
> -----Original Message-----
> From: Abel Vesa
> Sent: Wednesday, June 20, 2018 8:24 PM
> To: Lucas Stach <l.stach@...gutronix.de>; A.s. Dong
> <aisheng.dong@....com>
> Cc: linux-gpio@...r.kernel.org; dl-linux-imx <linux-imx@....com>; Shawn
> Guo <shawnguo@...nel.org>; Pengutronix Kernel Team
> <kernel@...gutronix.de>; Linus Walleij <linus.walleij@...aro.org>; Rob
> Herring <robh+dt@...nel.org>; Mark Rutland <mark.rutland@....com>;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; Abel Vesa
> <abelvesa@...ux.com>; Abel Vesa <abel.vesa@....com>
> Subject: [PATCH v4 1/2] dt-bindings: add binding for i.MX8MQ IOMUXC
>
> This adds the binding for the i.MX8MQ pin controller, in the same fashion as
> earlier i.MX SoCs.
>
> Signed-off-by: Abel Vesa <abel.vesa@....com>
> ---
> .../bindings/pinctrl/fsl,imx8mq-pinctrl.txt | 29
> ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
> new file mode 100644
> index 0000000..f11a3f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
> @@ -0,0 +1,29 @@
> +* Freescale IMX8MQ IOMUX Controller
> +
> +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this
> +directory for common binding part and usage.
> +
> +Required properties:
> +- compatible: "fsl,imx8mq-iomuxc"
> +- fsl,pins: each entry consists of 6 integers and represents the mux
> +and config
> + setting for one pin. The first 5 integers <mux_reg conf_reg
> +input_reg mux_val
> + input_val> are specified using a PIN_FUNC_ID macro, which can be
> +found in
> + imx8mq-pinfunc.h under device tree source folder. The last integer
> +CONFIG is
> + the pad setting value like pull-up on this pin. Please refer to
> +i.MX8M Quad
> + Reference Manual for detailed CONFIG settings.
> +
> +Examples:
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> +};
> +
> +&iomuxc {
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX
> 0x49
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX
> 0x49
> + >;
> + };
> +};
How about giving more detailed information in the example as it only shows
show the pinctrl group part.
e.g.
iomuxc: iomuxc@...30000 {
compatible = "fsl,imx8mq-iomuxc";
reg = <0x0 0x30330000 0x0 0x10000>;
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
>;
};
};
Other than that:
Acked-by: Dong Aisheng <Aisheng.dong@....com>
Regards
Dong Aisheng
> --
> 2.7.4
Powered by blists - more mailing lists