linux-kernel - [PATCH 13/32] media: camss: vfe: Do not disable CAMIF when clearing its status

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1529681621-9682-14-git-send-email-todor.tomov@linaro.org>
Date:   Fri, 22 Jun 2018 18:33:22 +0300
From:   Todor Tomov <todor.tomov@...aro.org>
To:     mchehab@...nel.org, sakari.ailus@...ux.intel.com,
        hans.verkuil@...co.com, laurent.pinchart+renesas@...asonboard.com,
        linux-media@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, Todor Tomov <todor.tomov@...aro.org>
Subject: [PATCH 13/32] media: camss: vfe: Do not disable CAMIF when clearing its status

Use "no change" value when clearing CAMIF status and make sure
this is done before configuring the new command.

Signed-off-by: Todor Tomov <todor.tomov@...aro.org>
---
 drivers/media/platform/qcom/camss/camss-vfe.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 77167f1..15a1a01 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -156,6 +156,7 @@
 #define VFE_0_CAMIF_CMD				0x2f4
 #define VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY	0
 #define VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY	1
+#define VFE_0_CAMIF_CMD_NO_CHANGE		3
 #define VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS	(1 << 2)
 #define VFE_0_CAMIF_CFG				0x2f8
 #define VFE_0_CAMIF_CFG_VFE_OUTPUT_EN		(1 << 6)
@@ -1021,8 +1022,10 @@ static void vfe_set_camif_cfg(struct vfe_device *vfe, struct vfe_line *line)
 
 static void vfe_set_camif_cmd(struct vfe_device *vfe, u32 cmd)
 {
-	writel_relaxed(VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS,
+	writel_relaxed(VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS |
+		       VFE_0_CAMIF_CMD_NO_CHANGE,
 		       vfe->base + VFE_0_CAMIF_CMD);
+	wmb();
 
 	writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
 }
-- 
2.7.4