[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180623161147.15672-2-manivannan.sadhasivam@linaro.org>
Date: Sat, 23 Jun 2018 21:41:43 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: wsa@...-dreams.de, robh+dt@...nel.org, afaerber@...e.de,
linus.walleij@...aro.org, linux-i2c@...r.kernel.org,
liuwei@...ions-semi.com, mp-cs@...ions-semi.com,
96boards@...obotics.com, devicetree@...r.kernel.org,
andy.shevchenko@...il.com, daniel.thompson@...aro.org,
amit.kucheria@...aro.org, linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
hzhang@...obotics.com, bdong@...obotics.com,
manivannanece23@...il.com, thomas.liau@...ions-semi.com,
jeff.chen@...ions-semi.com
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 1/5] dt-bindings: i2c: Add binding for Actions Semi OWL I2C controller
Add devicetree binding for Actions Semi OWL I2C controller
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
.../devicetree/bindings/i2c/i2c-owl.txt | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.txt b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
new file mode 100644
index 000000000000..9b691968cffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.txt
@@ -0,0 +1,27 @@
+OWL I2C controller
+
+Required properties:
+
+- compatible : Should be "actions,s900-i2c".
+- reg : Offset and length of the register set for the device.
+- #address-cells : Should be 1.
+- #size-cells : Should be 0.
+- interrupts : A single interrupt specifier.
+- clocks : Phandle of the clock feeding the I2C controller.
+
+Optional properties:
+
+- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and
+ Fast modes are supported, possible values are 100000 and
+ 400000.
+Examples:
+
+ i2c0: i2c@...70000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_I2C0>;
+ clock-frequency = <100000>;
+ };
--
2.17.1
Powered by blists - more mailing lists