| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180624154027.27654-2-johnfwhitmore@gmail.com>
Date: Sun, 24 Jun 2018 16:40:20 +0100
From: John Whitmore <johnfwhitmore@...il.com>
To: linux-kernel@...r.kernel.org
Cc: devel@...verdev.osuosl.org, gregkh@...uxfoundation.org,
John Whitmore <johnfwhitmore@...il.com>
Subject: [PATCH v3 1/8] staging: rtl8192u: change block comments to prefered style - Coding Style
Some of the comment blocks are commening out code so have been left for the
moment.
Signed-off-by: John Whitmore <johnfwhitmore@...il.com>
---
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 366 ++++++++++--------
1 file changed, 195 insertions(+), 171 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 5a48693e2cf3..54c48747f5fa 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -41,17 +41,18 @@ static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
//static u8 DLINK_ATHEROS[3] = {0x00, 0x1c, 0xf0};
static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
-
-// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
-// code in other place??
-//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
-/********************************************************************************************************************
+/*
+ * 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
+ * code in other place??
+ * static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
+ */
+/*
*function: This function update default settings in pHTInfo structure
* input: PRT_HIGH_THROUGHPUT pHTInfo
* output: none
* return: none
* notice: These value need be modified if any changes.
- * *****************************************************************************************************************/
+ */
void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -93,8 +94,10 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
// 8190 only. Assign duration operation mode to firmware
pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
#endif
- // 8190 only, Realtek proprietary aggregation mode
- // Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ /*
+ * 8190 only, Realtek proprietary aggregation mode
+ * Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
+ */
pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
// For Rx Reorder Control
@@ -113,14 +116,14 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
#endif
}
-/********************************************************************************************************************
+/*
*function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq)
* input: u8* CapIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
* return: none
* notice: Driver should not print out this message by default.
- * *****************************************************************************************************************/
+ */
void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
{
static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily
@@ -147,14 +150,14 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
pCapELE->MCS[1], pCapELE->MCS[2], pCapELE->MCS[3], pCapELE->MCS[4]);
}
-/********************************************************************************************************************
+/*
*function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp)
* input: u8* InfoIE //Capability IE to be printed out
* u8* TitleString //mainly print out caller function
* output: none
* return: none
* notice: Driver should not print out this message by default.
- * *****************************************************************************************************************/
+ */
void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
{
static u8 EWC11NHTInfo[] = {0x00, 0x90, 0x4c, 0x34}; // For 11n EWC definition, 2007.07.17, by Emily
@@ -209,8 +212,8 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
}
/*
-* Return: true if station in half n mode and AP supports 40 bw
-*/
+ * Return: true if station in half n mode and AP supports 40 bw
+ */
static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -276,14 +279,14 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate & 0x7f)];
}
-/********************************************************************************************************************
+/*
*function: This function returns current datarate.
* input: struct ieee80211_device* ieee
* u8 nDataRate
* output: none
* return: tx rate
* notice: quite unsure about how to use this function //wb
- * *****************************************************************************************************************/
+ */
u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
{
//PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -345,13 +348,13 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
return retValue;
}
-/********************************************************************************************************************
+/*
*function: This function returns peer IOT.
* input: struct ieee80211_device* ieee
* output: none
* return:
* notice:
- * *****************************************************************************************************************/
+ */
static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -383,31 +386,31 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
IEEE80211_DEBUG(IEEE80211_DL_IOT, "Joseph debug!! IOTPEER: %x\n", pHTInfo->IOTPeer);
}
-/********************************************************************************************************************
+/*
*function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good
* at receiving MCS14~15 frame from some AP.
* input: struct ieee80211_device* ieee
* u8 * PeerMacAddr
* output: none
* return: return 1 if driver should declare MCS13 only(otherwise return 0)
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
}
-/**
-* Function: HTIOTActIsDisableMCS15
-*
-* Overview: Check whether driver should declare capability of receiving MCS15
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable MCS15
-* 2008.04.15 Emily
-*/
+/*
+ * Function: HTIOTActIsDisableMCS15
+ *
+ * Overview: Check whether driver should declare capability of receiving MCS15
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable MCS15
+ * 2008.04.15 Emily
+ */
static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -433,18 +436,18 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
return retValue;
}
-/**
-* Function: HTIOTActIsDisableMCSTwoSpatialStream
-*
-* Overview: Check whether driver should declare capability of receiving All 2 ss packets
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable all two spatial stream packet
-* 2008.04.21 Emily
-*/
+/*
+ * Function: HTIOTActIsDisableMCSTwoSpatialStream
+ *
+ * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable all two spatial stream packet
+ * 2008.04.21 Emily
+ */
static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
@@ -454,25 +457,25 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
return false;
}
-/********************************************************************************************************************
+/*
*function: Check whether driver should disable EDCA turbo mode
* input: struct ieee80211_device* ieee
* u8* PeerMacAddr
* output: none
* return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{ /* default enable EDCA Turbo mode. */
return false;
}
-/********************************************************************************************************************
+/*
*function: Check whether we need to use OFDM to sned MGNT frame for broadcom AP
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
- * *****************************************************************************************************************/
+ */
static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
@@ -504,7 +507,7 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
}
-/********************************************************************************************************************
+/*
*function: Construct Capablility Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Capability Ele
@@ -513,7 +516,7 @@ void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo)
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
- * *****************************************************************************************************************/
+ */
void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -557,8 +560,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
- //MAC HT parameters info
- // TODO: Nedd to take care of this part
+ /*
+ * MAC HT parameters info
+ * TODO: Nedd to take care of this part
+ */
IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
if (IsEncrypt) {
@@ -580,8 +585,10 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (pHT->IOTAction & HT_IOT_ACT_DISABLE_ALL_2SS)
pCapELE->MCS[1] &= 0x00;
- // 2008.06.12
- // For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+ /*
+ * 2008.06.12
+ * For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
+ */
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
int i;
@@ -609,7 +616,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
// HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
}
-/********************************************************************************************************************
+/*
*function: Construct Information Element in Beacon... if HTEnable is turned on
* input: struct ieee80211_device* ieee
* u8* posHTCap //pointer to store Information Ele
@@ -618,7 +625,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
- * *****************************************************************************************************************/
+ */
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -659,24 +666,24 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
- *
- * Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
- *
- * OUI = 0x00, 0xe0, 0x4c,
- * Type = 0x02
- * Reserved = 0x00
- *
- * 2007.8.21 by Emily
-*/
-/********************************************************************************************************************
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
+ * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
+ * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
+ * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
+ * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
+ * at the same time.
+ *
+ * Frame Format
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ *
+ * OUI = 0x00, 0xe0, 0x4c,
+ * Type = 0x02
+ * Reserved = 0x00
+ *
+ * 2007.8.21 by Emily
+ */
+/*
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
* u8* posRT2RTAgg //pointer to store Information Ele
@@ -684,7 +691,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
* output: none
* return: none
* notice:
- * *****************************************************************************************************************/
+ */
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
if (!posRT2RTAgg) {
@@ -726,13 +733,13 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
#endif
}
-/********************************************************************************************************************
+/*
*function: Pick the right Rate Adaptive table to use
* input: struct ieee80211_device* ieee
* u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
- * *****************************************************************************************************************/
+ */
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
@@ -774,24 +781,24 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
}
/*
-* Description:
-* This function will get the highest speed rate in input MCS set.
-*
-* /param Adapter Pionter to Adapter entity
-* pMCSRateSet Pointer to MCS rate bitmap
-* pMCSFilter Pointer to MCS rate filter
-*
-* /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
-*
-*/
-/********************************************************************************************************************
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
+ *
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
+ *
+ * /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+ *
+ */
+/*
*function: This function will get the highest speed rate in input MCS set.
* input: struct ieee80211_device* ieee
* u8* pMCSRateSet //Pointer to MCS rate bitmap
* u8* pMCSFilter //Pointer to MCS rate filter
* return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
* notice:
- * *****************************************************************************************************************/
+ */
u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter)
{
u8 i, j;
@@ -829,14 +836,13 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
}
/*
-**
-**1.Filter our operation rate set with AP's rate set
-**2.shall reference channel bandwidth, STBC, Antenna number
-**3.generate rate adative table for firmware
-**David 20060906
-**
-** \pHTSupportedCap: the connected STA's supported rate Capability element
-*/
+ * 1.Filter our operation rate set with AP's rate set
+ * 2.shall reference channel bandwidth, STBC, Antenna number
+ * 3.generate rate adative table for firmware
+ * David 20060906
+ *
+ * \pHTSupportedCap: the connected STA's supported rate Capability element
+ */
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
@@ -849,18 +855,20 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// TODO: adjust our operational rate set according to our channel bandwidth, STBC and Antenna number
- // TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
- // we also shall suggested the first start rate set according to our singal strength
+ /*
+ * TODO: fill suggested rate adaptive rate index and give firmware info using Tx command packet
+ * we also shall suggested the first start rate set according to our singal strength
+ */
HT_PickMCSRate(ieee, pOperateMCS);
// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
pOperateMCS[1] = 0;
- //
- // For RTL819X, we support only MCS0~15.
- // And also, we do not know how to use MCS32 now.
- //
+ /*
+ * For RTL819X, we support only MCS0~15.
+ * And also, we do not know how to use MCS32 now.
+ */
for (i = 2; i <= 15; i++)
pOperateMCS[i] = 0;
@@ -911,30 +919,33 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->bCurTxBW40MHz = (pPeerHTInfo->RecommemdedTxWidth == 1);
- //
- // Update short GI/ long GI setting
- //
- // TODO:
+ /*
+ * Update short GI/ long GI setting
+ *
+ * TODO:
+ */
pHTInfo->bCurShortGI20MHz = pHTInfo->bRegShortGI20MHz &&
(pPeerHTCap->ShortGI20Mhz == 1);
pHTInfo->bCurShortGI40MHz = pHTInfo->bRegShortGI40MHz &&
(pPeerHTCap->ShortGI40Mhz == 1);
- //
- // Config TX STBC setting
- //
- // TODO:
+ /*
+ * Config TX STBC setting
+ *
+ * TODO:
+ */
- //
- // Config DSSS/CCK mode in 40MHz mode
- //
- // TODO:
+ /*
+ * Config DSSS/CCK mode in 40MHz mode
+ *
+ * TODO:
+ */
pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
(pPeerHTCap->DssCCk == 1);
- //
- // Config and configure A-MSDU setting
- //
+ /*
+ * Config and configure A-MSDU setting
+ */
pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
@@ -943,14 +954,15 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
else
pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
- //
- // Config A-MPDU setting
- //
+ /*
+ * Config A-MPDU setting
+ */
pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
- // <1> Decide AMPDU Factor
-
- // By Emily
+ /*
+ * <1> Decide AMPDU Factor
+ * By Emily
+ */
if (!pHTInfo->bRegRT2RTAggregation) {
// Decide AMPDU Factor according to protocol handshake
if (pHTInfo->AMPDU_Factor > pPeerHTCap->MaxRxAMPDUFactor)
@@ -958,8 +970,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
else
pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
} else {
- // Set MPDU density to 2 to Realtek AP, and set it to 0 for others
- // Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+ /*
+ * Set MPDU density to 2 to Realtek AP, and set it to 0 for others
+ * Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
+ */
if (ieee->current_network.bssht.bdRT2RTAggregation) {
if (ieee->pairwise_key_type != KEY_TYPE_NA)
// Realtek may set 32k in security mode and 64k for others
@@ -974,8 +988,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
}
}
- // <2> Set AMPDU Minimum MPDU Start Spacing
- // 802.11n 3.0 section 9.7d.3
+ /*
+ * <2> Set AMPDU Minimum MPDU Start Spacing
+ * 802.11n 3.0 section 9.7d.3
+ */
if (pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
else
@@ -997,22 +1013,24 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
// Rx Reorder Setting
pHTInfo->bCurRxReorderEnable = pHTInfo->bRegRxReorderEnable;
- //
- // Filter out unsupported HT rate for this AP
- // Update RATR table
- // This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
- //
+ /*
+ * Filter out unsupported HT rate for this AP
+ * Update RATR table
+ * This is only for 8190 ,8192 or later product which using firmware to handle rate adaptive mechanism.
+ */
- // Handle Ralink AP bad MCS rate set condition. Joseph.
- // This fix the bug of Ralink AP. This may be removed in the future.
+ /*
+ * Handle Ralink AP bad MCS rate set condition. Joseph.
+ * This fix the bug of Ralink AP. This may be removed in the future.
+ */
if (pPeerHTCap->MCS[0] == 0)
pPeerHTCap->MCS[0] = 0xff;
HTFilterMCSRate(ieee, pPeerHTCap->MCS, ieee->dot11HTOperationalRateSet);
- //
- // Config MIMO Power Save setting
- //
+ /*
+ * Config MIMO Power Save setting
+ */
pHTInfo->PeerMimoPs = pPeerHTCap->MimoPwrSave;
if (pHTInfo->PeerMimoPs == MIMO_PS_STATIC)
pMcsFilter = MCS_FILTER_1SS;
@@ -1023,28 +1041,28 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
ieee->HTHighestOperaRate = HTGetHighestMCSRate(ieee, ieee->dot11HTOperationalRateSet, pMcsFilter);
ieee->HTCurrentOperaRate = ieee->HTHighestOperaRate;
- //
- // Config current operation mode.
- //
+ /*
+ * Config current operation mode.
+ */
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
}
void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
-/********************************************************************************************************************
+/*
*function: initialize HT info(struct PRT_HIGH_THROUGHPUT)
* input: struct ieee80211_device* ieee
* output: none
* return: none
* notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
-********************************************************************************************************************/
+ */
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- //
- // These parameters will be reset when receiving deauthentication packet
- //
+ /*
+ * These parameters will be reset when receiving deauthentication packet
+ */
IEEE80211_DEBUG(IEEE80211_DL_HT, "===========>%s()\n", __func__);
pHTInfo->bCurrentHTSupport = false;
@@ -1057,10 +1075,12 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
pHTInfo->bCurShortGI40MHz = false;
pHTInfo->bForcedShortGI = false;
- // CCK rate support
- // This flag is set to true to support CCK rate by default.
- // It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
- // 11N BSS.
+ /*
+ * CCK rate support
+ * This flag is set to true to support CCK rate by default.
+ * It will be affected by "pHTInfo->bRegSuppCCK" and AP capabilities only when associate to
+ * 11N BSS.
+ */
pHTInfo->bCurSuppCCK = true;
// AMSDU related
@@ -1099,13 +1119,13 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
}
}
-/********************************************************************************************************************
+/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: PBSS_HT pBssHT //to be initialized
* output: none
* return: none
* notice: This function is called when initialize network structure
-********************************************************************************************************************/
+ */
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
pBssHT->bdSupportHT = false;
@@ -1120,14 +1140,14 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
pBssHT->bdRT2RTLongSlotTime = false;
}
-/********************************************************************************************************************
+/*
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
* struct ieee80211_network *pNetwork //usually current network we are live in
* output: none
* return: none
* notice: This function should ONLY be called before association
-********************************************************************************************************************/
+ */
void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1166,8 +1186,10 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee802
// Determine the IOT Peer Vendor.
HTIOTPeerDetermine(ieee);
- // Decide IOT Action
- // Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+ /*
+ * Decide IOT Action
+ * Must be called after the parameter of pHTInfo->bCurrentRT2RTAggregation is decided
+ */
pHTInfo->IOTAction = 0;
bIOTAction = HTIOTActIsDisableMCS14(ieee, pNetwork->bssid);
if (bIOTAction)
@@ -1208,27 +1230,27 @@ void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_
PHT_INFORMATION_ELE pPeerHTInfo = (PHT_INFORMATION_ELE)pNetwork->bssht.bdHTInfoBuf;
if (pHTInfo->bCurrentHTSupport) {
- //
- // Config current operation mode.
- //
+ /*
+ * Config current operation mode.
+ */
if (pNetwork->bssht.bdHTInfoLen != 0)
pHTInfo->CurrentOpMode = pPeerHTInfo->OptMode;
- //
- // <TODO: Config according to OBSS non-HT STA present!!>
- //
+ /*
+ * <TODO: Config according to OBSS non-HT STA present!!>
+ */
}
}
EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
-/********************************************************************************************************************
+/*
*function: check whether HT control field exists
* input: struct ieee80211_device *ieee
* u8* pFrame //coming skb->data
* output: none
* return: return true if HT control field exists(false otherwise)
* notice:
-********************************************************************************************************************/
+ */
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
if (ieee->pHTInfo->bCurrentHTSupport) {
@@ -1240,9 +1262,9 @@ u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
return false;
}
-//
-// This function set bandwidth mode in protocol layer.
-//
+/*
+ * This function set bandwidth mode in protocol layer.
+ */
void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1280,10 +1302,12 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
pHTInfo->bSwBwInProgress = true;
- // TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
- // bandwidth is executed after scan is finished. It is a temporal solution
- // because software should ganrantee the last operation of switching bandwidth
- // is executed properlly.
+ /*
+ * TODO: 2007.7.13 by Emily Wait 2000ms in order to guarantee that switching
+ * bandwidth is executed after scan is finished. It is a temporal solution
+ * because software should ganrantee the last operation of switching bandwidth
+ * is executed properlly.
+ */
HTSetConnectBwModeCallback(ieee);
// spin_unlock_irqrestore(&(ieee->bw_spinlock), flags);
--
2.17.1
Powered by blists - more mailing lists