[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180625084740.GN2958@phenom.ffwll.local>
Date: Mon, 25 Jun 2018 10:47:40 +0200
From: Daniel Vetter <daniel@...ll.ch>
To: Stu Hsieh <stu.hsieh@...iatek.com>
Cc: CK Hu <ck.hu@...iatek.com>, Philipp Zabel <p.zabel@...gutronix.de>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, srv_heupstream@...iatek.com,
David Airlie <airlied@...ux.ie>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, Rob Herring <robh+dt@...nel.org>,
linux-mediatek@...ts.infradead.org,
Matthias Brugger <matthias.bgg@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7 00/29] Add support for mediatek SOC MT2712
On Wed, Jun 20, 2018 at 04:19:02PM +0800, Stu Hsieh wrote:
> This patch add support for the Mediatek MT2712 DISP subsystem.
> MT2712 is base on MT8173, there are some difference as following:
> MT2712 support three disp output(two ovl and one rdma)
>
> Change in v6:
> - Update commit message for the patch
> "drm/mediatek: Update the definition of connection from RDMA1 to DPI0"
Just a drive-by comment on the mediatek driver:
As far as I can see mtk_drm_gem.c reimplements the cma helpers as a
copypaste job. Any reasons why you're not using the normal cma helpers?
Thanks, Daniel
>
> Stu Hsieh (29):
> drm/mediatek: update dt-bindings for mt2712
> drm/mediatek: support maximum 64 mutex mod
> drm/mediatek: add ddp component AAL1
> drm/mediatek: add ddp component OD1
> drm/mediatek: add ddp component PWM1
> drm/mediatek: add ddp component PWM2
> drm/mediatek: add component DPI1
> drm/mediatek: add component DSI2
> drm/mediatek: add component DSI3
> drm/mediatek: add the DSI1 for component init condition
> drm/mediatek: add connection from OD1 to RDMA1
> drm/mediatek: Update the definition of connection from RDMA1 to DPI0
> drm/mediatek: add connection from RDMA0 to DPI0
> drm/mediatek: add connection from RDMA0 to DSI2
> drm/mediatek: add connection from RDMA0 to DSI3
> drm/mediatek: add connection from RDMA1 to DPI1
> drm/mediatek: add connection from RDMA1 to DSI1
> drm/mediatek: add connection from RDMA1 to DSI2
> drm/mediatek: add connection from RDMA1 to DSI3
> drm/mediatek: add connection from RDMA2 to DPI0
> drm/mediatek: add connection from RDMA2 to DPI1
> drm/mediatek: add connection from RDMA2 to DSI1
> drm/mediatek: add connection from RDMA2 to DSI2
> drm/mediatek: add connection from RDMA2 to DSI3
> drm/mediatek: add DPI1 support for mutex
> drm/mediatek: add DSI2 support for mutex
> drm/mediatek: add DSI3 support for mutex
> drm/mediatek: add third ddp path
> drm/mediatek: Add support for mediatek SOC MT2712
>
> .../bindings/display/mediatek/mediatek,disp.txt | 2 +-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 3 +
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 235 ++++++++++++++++++---
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 +-
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 +-
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 47 ++++-
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 5 +-
> 7 files changed, 274 insertions(+), 43 deletions(-)
>
> --
> 2.12.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Powered by blists - more mailing lists