[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180625120304.7543-25-jernej.skrabec@siol.net>
Date: Mon, 25 Jun 2018 14:03:04 +0200
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: maxime.ripard@...tlin.com, wens@...e.org, robh+dt@...nel.org
Cc: airlied@...ux.ie, gustavo@...ovan.org,
maarten.lankhorst@...ux.intel.com, seanpaul@...omium.org,
mark.rutland@....com, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH v3 24/24] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
Since HDMI can be considered as main output, most capable mixer is
connected to it (mixer0).
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
.../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 27d9ccd0ef2f..0ebc2f9a980e 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -58,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -93,6 +104,10 @@
};
};
+&de {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -101,6 +116,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
status = "okay";
@@ -195,6 +220,26 @@
status = "okay";
};
+&tcon_top_hdmi_in_tcon_tv0 {
+ remote-endpoint = <&tcon_tv0_out_tcon_top>;
+};
+
+&tcon_top_mixer0_out_tcon_tv0 {
+ remote-endpoint = <&tcon_tv0_in_tcon_top>;
+};
+
+&tcon_tv0_in {
+ tcon_tv0_in_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+ };
+};
+
+&tcon_tv0_out {
+ tcon_tv0_out_tcon_top: endpoint {
+ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
--
2.18.0
Powered by blists - more mailing lists